From: Adam Ford <aford173@gmail.com>
To: u-boot@lists.denx.de
Cc: sbabic@denx.de, festevam@gmail.com, uboot-imx@nxp.com,
trini@konsulko.com, Adam Ford <aford173@gmail.com>
Subject: [PATCH V2 1/2] arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1
Date: Sat, 22 Jan 2022 12:27:33 -0600 [thread overview]
Message-ID: <20220122182734.25580-1-aford173@gmail.com> (raw)
Resync the SOM and baseboar files with the device trees that will
be included in 5.17-RC1 when it's cut. This will improve pinmuxing
for USDHC1 and add USB functionality.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
index d6b9dedd16..4097a66163 100644
--- a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
@@ -43,6 +43,17 @@
enable-active-high;
};
+ reg_usbotg1: regulator-usbotg1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb_otg1>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
regulator-name = "VSD_3V3";
@@ -102,7 +113,6 @@
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
- clock-names = "xclk";
DCVDD-supply = <®_audio>;
DBVDD-supply = <®_audio>;
AVDD-supply = <®_audio>;
@@ -170,6 +180,24 @@
status = "okay";
};
+&usbotg1 {
+ vbus-supply = <®_usbotg1>;
+ disable-over-current;
+ dr_mode="otg";
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ disable-over-current;
+ dr_mode="host";
+ status = "okay";
+};
+
+&usbphynop2 {
+ reset-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+};
+
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
@@ -216,6 +244,12 @@
>;
};
+ pinctrl_reg_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19
+ >;
+ };
+
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
diff --git a/arch/arm/dts/imx8mm-beacon-som.dtsi b/arch/arm/dts/imx8mm-beacon-som.dtsi
index d897913537..cf07987ccc 100644
--- a/arch/arm/dts/imx8mm-beacon-som.dtsi
+++ b/arch/arm/dts/imx8mm-beacon-som.dtsi
@@ -91,7 +91,7 @@
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <80000000>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
@@ -256,12 +256,13 @@
&usdhc1 {
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <4>;
non-removable;
cap-power-off-card;
- pm-ignore-notify;
keep-power-in-suspend;
mmc-pwrseq = <&usdhc1_pwrseq>;
status = "okay";
--
2.32.0
next reply other threads:[~2022-01-22 18:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-22 18:27 Adam Ford [this message]
2022-01-22 18:27 ` [PATCH V2 2/2] imx: imx8mm_beacon: Enable USB Adam Ford
2022-01-22 20:14 ` Fabio Estevam
2022-01-22 20:17 ` Adam Ford
2022-02-05 16:39 ` sbabic
2022-01-22 20:12 ` [PATCH V2 1/2] arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1 Fabio Estevam
2022-02-05 16:39 ` sbabic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220122182734.25580-1-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=festevam@gmail.com \
--cc=sbabic@denx.de \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox