From: Adam Ford <aford173@gmail.com>
To: u-boot@lists.denx.de
Cc: sbabic@denx.de, trini@konsulko.com, festevam@gmail.com,
uboot-imx@nxp.com, aford@beaconembedded.com,
Adam Ford <aford173@gmail.com>
Subject: [PATCH 3/3] configs: imx8mn_beacon_2g_defconfig: Sync with standard model
Date: Sat, 22 Jan 2022 13:48:36 -0600 [thread overview]
Message-ID: <20220122194836.64044-3-aford173@gmail.com> (raw)
In-Reply-To: <20220122194836.64044-1-aford173@gmail.com>
Sync'ing the imx8mn_beacon_2g_defconfig with the standard model
means making the configs the same with one additional flag because
the 2G version has a different RAM.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig
index 8b98d687ec..c6af6beaf9 100644
--- a/configs/imx8mn_beacon_2g_defconfig
+++ b/configs/imx8mn_beacon_2g_defconfig
@@ -39,6 +39,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_SPL_I2C=y
CONFIG_SPL_POWER=y
+CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="u-boot=> "
# CONFIG_BOOTM_NETBSD is not set
@@ -53,6 +54,9 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
@@ -64,7 +68,6 @@ CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent interrupts"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -93,10 +96,13 @@ CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_USDHC=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=40000000
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MTD=y
CONFIG_PHYLIB=y
CONFIG_PHY_ATHEROS=y
CONFIG_DM_ETH=y
@@ -104,6 +110,7 @@ CONFIG_PHY_GIGE=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMX8M=y
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
@@ -118,12 +125,16 @@ CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
# CONFIG_SPL_DM_USB is not set
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="FSL"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
@@ -131,3 +142,5 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_SDP_LOADADDR=0x0
CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_IMX_WATCHDOG=y
+
--
2.32.0
next prev parent reply other threads:[~2022-01-22 19:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-22 19:48 [PATCH 1/3] arm: dts: imx8mn-beacon: Resync dtsi with Kernel 5.17-rc1 Adam Ford
2022-01-22 19:48 ` [PATCH 2/3] imx: imx8mn_beacon: Enable USB Adam Ford
2022-01-22 20:11 ` Fabio Estevam
2022-01-22 19:48 ` Adam Ford [this message]
2022-01-22 20:12 ` [PATCH 1/3] arm: dts: imx8mn-beacon: Resync dtsi with Kernel 5.17-rc1 Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220122194836.64044-3-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=festevam@gmail.com \
--cc=sbabic@denx.de \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox