[PATCH 1/3] arm: dts: imx8mn-beacon: Resync dtsi with Kernel 5.17-rc1

Adam Ford
2022-01-22T19:48:49Z

Resync the SOM and baseboard files with the device trees that will
be included in 5.17-RC1 when it's cut. This will improve pinmuxing
for USDHC1 and add USB functionality. Add edits to
imx8mn-beacon-kit-u-boot for enabling USB.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm/dts/imx8mn-beacon-baseboard.dtsi b/arch/arm/dts/imx8mn-beacon-baseboard.dtsi
index 376ca8ff72..0f40b43ac0 100644
--- a/arch/arm/dts/imx8mn-beacon-baseboard.dtsi
+++ b/arch/arm/dts/imx8mn-beacon-baseboard.dtsi
@@ -126,7 +126,6 @@
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
- clock-names = "xclk";
DCVDD-supply = <&reg_audio>;
DBVDD-supply = <&reg_audio>;
AVDD-supply = <&reg_audio>;
diff --git a/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
index 69fd69c8d0..a06b271787 100644
--- a/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
@@ -110,6 +110,10 @@
u-boot,dm-spl;
};

+&usbotg1 {
+ dr_mode="host";
+};
+
&usdhc1 {
u-boot,dm-spl;
sd-uhs-sdr104;
diff --git a/arch/arm/dts/imx8mn-beacon-som.dtsi b/arch/arm/dts/imx8mn-beacon-som.dtsi
index de2cd0e320..1133cded9b 100644
--- a/arch/arm/dts/imx8mn-beacon-som.dtsi
+++ b/arch/arm/dts/imx8mn-beacon-som.dtsi
@@ -101,7 +101,7 @@
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <80000000>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
@@ -120,6 +120,9 @@
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";

regulators {
buck1_reg: BUCK1 {
@@ -262,12 +265,15 @@
&usdhc1 {
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vmmc-supply = <&buck4_reg>;
+ vqmmc-supply = <&buck5_reg>;
bus-width = <4>;
non-removable;
cap-power-off-card;
- pm-ignore-notify;
keep-power-in-suspend;
mmc-pwrseq = <&usdhc1_pwrseq>;
status = "okay";
--
2.32.0