From: Jesse Taube <mr.bossman075@gmail.com>
To: u-boot@lists.denx.de
Cc: jagan@amarulasolutions.com, andre.przywara@arm.com,
hdegoede@redhat.com, sjg@chromium.org, icenowy@aosc.io,
marek.behun@nic.cz, festevam@denx.de, narmstrong@baylibre.com,
tharvey@gateworks.com, christianshewitt@gmail.com,
pbrobinson@gmail.com, jernej.skrabec@gmail.com, hs@denx.de,
samuel@sholland.org, arnaud.ferraris@gmail.com,
giulio.benetti@benettiengineering.com, Mr.Bossman075@gmail.com,
thirtythreeforty@gmail.com
Subject: [PATCH v2 00/12] Add support for SUNIV and F1C100s.
Date: Wed, 26 Jan 2022 08:53:17 -0500 [thread overview]
Message-ID: <20220126135329.2997430-1-Mr.Bossman075@gmail.com> (raw)
This patch set aims to add support for the SUNIV and F1C100s.
Support has been in linux for a while now, but not in u-boot.
This patchset contains:
- CPU specific initialization code
- SUNIV dram driver
- SUNIV clock driver adaption
- SUNIV gpio driver adaption
- SUNIV uart driver adaption
- F1C100s basic support
The SUNIV seems to be similar to sun6i and sun4i, so we use code from
both platforms. We also add suniv to the cpu dircetory as it uses arm926ejs.
NOTE: To work this will need patchset "sunxi: remove lowlevel_init".
Icenowy Zheng (11):
arm: arm926ej-s: start.S: port save_boot_params support from armv7
code
arm: arm926ej-s: Add sunxi code
dt-bindings: clock: Add initial suniv headers
dt-bindings: reset: Add initial suniv headers
ARM: sunxi: Add clock and uart to sunxi headers
sunxi: Add F1C100s DRAM initial support
sunxi: board: Add support for SUNIV
configs: sunxi: Add common SUNIV header
mach-sunxi: Add support for SUNIV architecture
ARM: dts: suniv: Add device tree files for F1C100s
configs: sunxi: Add support for Lichee Pi Nano
Jesse Taube (1):
mach-sunxi: Move timer code to mach folder
arch/arm/cpu/arm926ejs/Makefile | 1 +
arch/arm/cpu/arm926ejs/start.S | 19 +
arch/arm/cpu/arm926ejs/sunxi/Makefile | 5 +
arch/arm/cpu/arm926ejs/sunxi/config.mk | 6 +
arch/arm/cpu/arm926ejs/sunxi/fel_utils.S | 33 ++
arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds | 48 ++
arch/arm/dts/Makefile | 2 +
arch/arm/dts/suniv-f1c100s-licheepi-nano.dts | 29 ++
arch/arm/dts/suniv-f1c100s.dtsi | 6 +
arch/arm/dts/suniv.dtsi | 160 +++++++
arch/arm/include/asm/arch-sunxi/clock.h | 2 +-
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 13 +
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 6 +
arch/arm/include/asm/arch-sunxi/dram.h | 2 +
arch/arm/include/asm/arch-sunxi/dram_suniv.h | 46 ++
arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
arch/arm/mach-sunxi/Kconfig | 16 +-
arch/arm/mach-sunxi/Makefile | 5 +
arch/arm/mach-sunxi/board.c | 28 +-
arch/arm/mach-sunxi/clock.c | 3 +-
arch/arm/mach-sunxi/clock_sun6i.c | 46 +-
arch/arm/mach-sunxi/cpu_info.c | 2 +
arch/arm/mach-sunxi/dram_helpers.c | 4 +
arch/arm/mach-sunxi/dram_suniv.c | 420 ++++++++++++++++++
.../{cpu/armv7/sunxi => mach-sunxi}/timer.c | 7 +-
board/sunxi/board.c | 4 +-
configs/licheepi_nano_defconfig | 15 +
include/configs/suniv.h | 14 +
include/configs/sunxi-common.h | 59 ++-
include/dt-bindings/clock/suniv-ccu.h | 69 +++
include/dt-bindings/reset/suniv-ccu.h | 37 ++
31 files changed, 1080 insertions(+), 28 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/sunxi/Makefile
create mode 100644 arch/arm/cpu/arm926ejs/sunxi/config.mk
create mode 100644 arch/arm/cpu/arm926ejs/sunxi/fel_utils.S
create mode 100644 arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds
create mode 100644 arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
create mode 100644 arch/arm/dts/suniv-f1c100s.dtsi
create mode 100644 arch/arm/dts/suniv.dtsi
create mode 100644 arch/arm/include/asm/arch-sunxi/dram_suniv.h
create mode 100644 arch/arm/mach-sunxi/dram_suniv.c
rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/timer.c (97%)
create mode 100644 configs/licheepi_nano_defconfig
create mode 100644 include/configs/suniv.h
create mode 100644 include/dt-bindings/clock/suniv-ccu.h
create mode 100644 include/dt-bindings/reset/suniv-ccu.h
--
2.34.1
next reply other threads:[~2022-01-26 13:53 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-26 13:53 Jesse Taube [this message]
2022-01-26 13:53 ` [PATCH v2 01/12] arm: arm926ej-s: start.S: port save_boot_params support from armv7 code Jesse Taube
2022-01-26 13:53 ` [PATCH v2 02/12] mach-sunxi: Move timer code to mach folder Jesse Taube
2022-01-27 10:21 ` Andre Przywara
2022-01-27 20:40 ` Jesse Taube
2022-01-28 0:41 ` Andre Przywara
2022-01-28 4:51 ` Jesse Taube
2022-01-28 14:28 ` Andre Przywara
2022-01-28 22:40 ` Jesse Taube
2022-01-26 13:53 ` [PATCH v2 03/12] arm: arm926ej-s: Add sunxi code Jesse Taube
2022-01-29 2:05 ` Andre Przywara
2022-01-29 2:42 ` Jesse Taube
2022-01-29 11:22 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 04/12] dt-bindings: clock: Add initial suniv headers Jesse Taube
2022-01-29 2:05 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 05/12] dt-bindings: reset: " Jesse Taube
2022-01-26 13:53 ` [PATCH v2 06/12] ARM: sunxi: Add clock and uart to sunxi headers Jesse Taube
2022-01-29 2:11 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 07/12] sunxi: Add F1C100s DRAM initial support Jesse Taube
2022-01-26 13:53 ` [PATCH v2 08/12] sunxi: board: Add support for SUNIV Jesse Taube
2022-01-26 13:53 ` [PATCH v2 09/12] configs: sunxi: Add common SUNIV header Jesse Taube
2022-01-26 17:43 ` Jesse Taube
2022-01-29 2:18 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 10/12] mach-sunxi: Add support for SUNIV architecture Jesse Taube
2022-01-26 13:53 ` [PATCH v2 11/12] ARM: dts: suniv: Add device tree files for F1C100s Jesse Taube
2022-01-29 2:25 ` Andre Przywara
2022-01-29 2:31 ` Jesse Taube
2022-01-29 2:37 ` Andre Przywara
2022-01-29 3:01 ` Jesse Taube
2022-01-29 11:25 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 12/12] configs: sunxi: Add support for Lichee Pi Nano Jesse Taube
2022-01-29 2:40 ` [PATCH v2 00/12] Add support for SUNIV and F1C100s Andre Przywara
2022-01-29 2:44 ` Jesse Taube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220126135329.2997430-1-Mr.Bossman075@gmail.com \
--to=mr.bossman075@gmail.com \
--cc=andre.przywara@arm.com \
--cc=arnaud.ferraris@gmail.com \
--cc=christianshewitt@gmail.com \
--cc=festevam@denx.de \
--cc=giulio.benetti@benettiengineering.com \
--cc=hdegoede@redhat.com \
--cc=hs@denx.de \
--cc=icenowy@aosc.io \
--cc=jagan@amarulasolutions.com \
--cc=jernej.skrabec@gmail.com \
--cc=marek.behun@nic.cz \
--cc=narmstrong@baylibre.com \
--cc=pbrobinson@gmail.com \
--cc=samuel@sholland.org \
--cc=sjg@chromium.org \
--cc=tharvey@gateworks.com \
--cc=thirtythreeforty@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox