From: Jesse Taube <mr.bossman075@gmail.com>
To: u-boot@lists.denx.de
Cc: jagan@amarulasolutions.com, andre.przywara@arm.com,
hdegoede@redhat.com, sjg@chromium.org, icenowy@aosc.io,
marek.behun@nic.cz, festevam@denx.de, narmstrong@baylibre.com,
tharvey@gateworks.com, christianshewitt@gmail.com,
pbrobinson@gmail.com, jernej.skrabec@gmail.com, hs@denx.de,
samuel@sholland.org, arnaud.ferraris@gmail.com,
giulio.benetti@benettiengineering.com, Mr.Bossman075@gmail.com,
thirtythreeforty@gmail.com
Subject: [PATCH v2 03/12] arm: arm926ej-s: Add sunxi code
Date: Wed, 26 Jan 2022 08:53:20 -0500 [thread overview]
Message-ID: <20220126135329.2997430-4-Mr.Bossman075@gmail.com> (raw)
In-Reply-To: <20220126135329.2997430-1-Mr.Bossman075@gmail.com>
From: Icenowy Zheng <icenowy@aosc.io>
Some Allwinner SoCs use ARM926EJ-S core.
Add Allwinner/sunXi specific code to ARM926EJ-S CPU dircetory.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
---
V1->V2:
* Fix Copyright notice
* Remove lowlevel_init
* Remove replaced timer.c
* Remove Read CP15 Control Register
* Remove unused start.c
---
arch/arm/cpu/arm926ejs/Makefile | 1 +
arch/arm/cpu/arm926ejs/sunxi/Makefile | 5 +++
arch/arm/cpu/arm926ejs/sunxi/config.mk | 6 +++
arch/arm/cpu/arm926ejs/sunxi/fel_utils.S | 33 ++++++++++++++
arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds | 48 +++++++++++++++++++++
5 files changed, 93 insertions(+)
create mode 100644 arch/arm/cpu/arm926ejs/sunxi/Makefile
create mode 100644 arch/arm/cpu/arm926ejs/sunxi/config.mk
create mode 100644 arch/arm/cpu/arm926ejs/sunxi/fel_utils.S
create mode 100644 arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds
diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile
index b901b7c5c9..7f1436d76e 100644
--- a/arch/arm/cpu/arm926ejs/Makefile
+++ b/arch/arm/cpu/arm926ejs/Makefile
@@ -15,6 +15,7 @@ endif
obj-$(CONFIG_MX27) += mx27/
obj-$(if $(filter mxs,$(SOC)),y) += mxs/
obj-$(if $(filter spear,$(SOC)),y) += spear/
+obj-$(CONFIG_ARCH_SUNXI) += sunxi/
# some files can only build in ARM or THUMB2, not THUMB1
diff --git a/arch/arm/cpu/arm926ejs/sunxi/Makefile b/arch/arm/cpu/arm926ejs/sunxi/Makefile
new file mode 100644
index 0000000000..7d8b959dcd
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/sunxi/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+
+obj-y += fel_utils.o
+CFLAGS_fel_utils.o := -marm
diff --git a/arch/arm/cpu/arm926ejs/sunxi/config.mk b/arch/arm/cpu/arm926ejs/sunxi/config.mk
new file mode 100644
index 0000000000..76ffec9df6
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/sunxi/config.mk
@@ -0,0 +1,6 @@
+# Build a combined spl + u-boot image
+ifdef CONFIG_SPL
+ifndef CONFIG_SPL_BUILD
+ALL-y += u-boot-sunxi-with-spl.bin
+endif
+endif
diff --git a/arch/arm/cpu/arm926ejs/sunxi/fel_utils.S b/arch/arm/cpu/arm926ejs/sunxi/fel_utils.S
new file mode 100644
index 0000000000..08be7ed11a
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/sunxi/fel_utils.S
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Utility functions for FEL mode.
+ *
+ * Copyright (c) 2015 Google, Inc
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/system.h>
+#include <linux/linkage.h>
+
+ENTRY(save_boot_params)
+ ldr r0, =fel_stash
+ str sp, [r0, #0]
+ str lr, [r0, #4]
+ mrs lr, cpsr @ Read CPSR
+ str lr, [r0, #8]
+ mrc p15, 0, lr, c1, c0, 0 @ Read CP15 SCTLR Register
+ str lr, [r0, #12]
+ b save_boot_params_ret
+ENDPROC(save_boot_params)
+
+ENTRY(return_to_fel)
+ mov sp, r0
+ mov lr, r1
+ ldr r0, =fel_stash
+ ldr r1, [r0, #16]
+ mcr p15, 0, r1, c1, c0, 0 @ Write CP15 Control Register
+ ldr r1, [r0, #12]
+ msr cpsr, r1 @ Write CPSR
+ bx lr
+ENDPROC(return_to_fel)
diff --git a/arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds
new file mode 100644
index 0000000000..9a000ac5d3
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2018
+ * Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on arch/arm/cpu/armv7/sunxi/u-boot-spl.lds:
+ */
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ .text :
+ {
+ __start = .;
+ *(.vectors)
+ *(.text*)
+ } > .sram
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+ . = ALIGN(4);
+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ } > .sram
+
+ . = ALIGN(4);
+ __image_copy_end = .;
+ _end = .;
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_end = .;
+ } > .sdram
+}
--
2.34.1
next prev parent reply other threads:[~2022-01-26 13:54 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-26 13:53 [PATCH v2 00/12] Add support for SUNIV and F1C100s Jesse Taube
2022-01-26 13:53 ` [PATCH v2 01/12] arm: arm926ej-s: start.S: port save_boot_params support from armv7 code Jesse Taube
2022-01-26 13:53 ` [PATCH v2 02/12] mach-sunxi: Move timer code to mach folder Jesse Taube
2022-01-27 10:21 ` Andre Przywara
2022-01-27 20:40 ` Jesse Taube
2022-01-28 0:41 ` Andre Przywara
2022-01-28 4:51 ` Jesse Taube
2022-01-28 14:28 ` Andre Przywara
2022-01-28 22:40 ` Jesse Taube
2022-01-26 13:53 ` Jesse Taube [this message]
2022-01-29 2:05 ` [PATCH v2 03/12] arm: arm926ej-s: Add sunxi code Andre Przywara
2022-01-29 2:42 ` Jesse Taube
2022-01-29 11:22 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 04/12] dt-bindings: clock: Add initial suniv headers Jesse Taube
2022-01-29 2:05 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 05/12] dt-bindings: reset: " Jesse Taube
2022-01-26 13:53 ` [PATCH v2 06/12] ARM: sunxi: Add clock and uart to sunxi headers Jesse Taube
2022-01-29 2:11 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 07/12] sunxi: Add F1C100s DRAM initial support Jesse Taube
2022-01-26 13:53 ` [PATCH v2 08/12] sunxi: board: Add support for SUNIV Jesse Taube
2022-01-26 13:53 ` [PATCH v2 09/12] configs: sunxi: Add common SUNIV header Jesse Taube
2022-01-26 17:43 ` Jesse Taube
2022-01-29 2:18 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 10/12] mach-sunxi: Add support for SUNIV architecture Jesse Taube
2022-01-26 13:53 ` [PATCH v2 11/12] ARM: dts: suniv: Add device tree files for F1C100s Jesse Taube
2022-01-29 2:25 ` Andre Przywara
2022-01-29 2:31 ` Jesse Taube
2022-01-29 2:37 ` Andre Przywara
2022-01-29 3:01 ` Jesse Taube
2022-01-29 11:25 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 12/12] configs: sunxi: Add support for Lichee Pi Nano Jesse Taube
2022-01-29 2:40 ` [PATCH v2 00/12] Add support for SUNIV and F1C100s Andre Przywara
2022-01-29 2:44 ` Jesse Taube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220126135329.2997430-4-Mr.Bossman075@gmail.com \
--to=mr.bossman075@gmail.com \
--cc=andre.przywara@arm.com \
--cc=arnaud.ferraris@gmail.com \
--cc=christianshewitt@gmail.com \
--cc=festevam@denx.de \
--cc=giulio.benetti@benettiengineering.com \
--cc=hdegoede@redhat.com \
--cc=hs@denx.de \
--cc=icenowy@aosc.io \
--cc=jagan@amarulasolutions.com \
--cc=jernej.skrabec@gmail.com \
--cc=marek.behun@nic.cz \
--cc=narmstrong@baylibre.com \
--cc=pbrobinson@gmail.com \
--cc=samuel@sholland.org \
--cc=sjg@chromium.org \
--cc=tharvey@gateworks.com \
--cc=thirtythreeforty@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox