From: Oliver Graute <oliver.graute@kococonnector.com>
To: sbabic@denx.de
Cc: festevam@gmail.com, uboot-imx@nxp.com, aford173@gmail.com,
peng.fan@nxp.com, marcel.ziswiler@toradex.com,
andrey.zhizhikin@leica-geosystems.com, oliver.graute@gmail.com,
Oliver Graute <oliver.graute@kococonnector.com>,
u-boot@lists.denx.de
Subject: [PATCH v1] imx: imx8qm-rom7720: switch to binman
Date: Wed, 26 Jan 2022 16:52:04 +0100 [thread overview]
Message-ID: <20220126155204.25099-1-oliver.graute@kococonnector.com> (raw)
Switch to use binman to pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
arch/arm/dts/imx8qm-rom7720-a1.dts | 1 +
arch/arm/dts/imx8qm-u-boot.dtsi | 133 ++++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 1 +
.../advantech/imx8qm_rom7720_a1/imximage.cfg | 4 +-
configs/imx8qm_rom7720_a1_4G_defconfig | 2 +-
doc/board/advantech/imx8qm-rom7720-a1.rst | 3 +-
6 files changed, 139 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/dts/imx8qm-u-boot.dtsi
diff --git a/arch/arm/dts/imx8qm-rom7720-a1.dts b/arch/arm/dts/imx8qm-rom7720-a1.dts
index d1f2fff869..332d441c6d 100644
--- a/arch/arm/dts/imx8qm-rom7720-a1.dts
+++ b/arch/arm/dts/imx8qm-rom7720-a1.dts
@@ -10,6 +10,7 @@
/memreserve/ 0x80000000 0x00020000;
#include "fsl-imx8qm.dtsi"
+#include "imx8qm-u-boot.dtsi"
/ {
model = "Advantech iMX8QM Qseven series";
diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
new file mode 100644
index 0000000000..5da420ece6
--- /dev/null
+++ b/arch/arm/dts/imx8qm-u-boot.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ u-boot-spl-ddr {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
+ };
+
+ spl {
+ filename = "spl.bin";
+
+ mkimage {
+ args = "-n spl/u-boot-spl.cfgout -T imx8image -e 0x100000";
+
+ blob {
+ filename = "u-boot-spl-ddr.bin";
+ };
+ };
+ };
+
+ itb {
+ filename = "u-boot.itb";
+
+ fit {
+ description = "Configuration to load ATF before U-Boot";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_SYS_TEXT_BASE>;
+ type = "standalone";
+
+ uboot_blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
+ };
+
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x00910000>;
+ load = <0x00091000>;
+ type = "firmware";
+
+ atf_blob {
+ filename = "bl31.bin";
+ type = "blob-ext";
+ };
+ };
+
+ scfw {
+ arch = "arm64";
+ compression = "none";
+ description = "System Controler Firmware";
+ type = "firmware";
+
+ scfw_blob {
+ filename = "mx8qm-val-scfw-tcm.bin";
+ type = "blob-ext";
+ };
+ };
+
+ seco {
+ arch = "arm64";
+ compression = "none";
+ description = "Seco Firmware";
+ type = "firmware";
+
+ seco_blob {
+ filename = "mx8qm-ahab-container.img";
+ type = "blob-ext";
+ };
+ };
+
+ fdt {
+ filename = "imx8qm-rom7720-a1";
+ type = "flat_dt";
+ compression = "none";
+
+ uboot_fdt_blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf";
+
+ conf {
+ filename = "imx8qm-rom7720-a1";
+ fdt = "fdt";
+ firmware = "uboot";
+ loadables = "atf";
+ };
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl {
+ filename = "spl.bin";
+ offset = <0x0>;
+ type = "blob-ext";
+ };
+ };
+};
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index b43739e5c6..b42b985cdf 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -81,6 +81,7 @@ config TARGET_CONGA_QMX8
config TARGET_IMX8QM_ROM7720_A1
bool "Support i.MX8QM ROM-7720-A1"
+ select BINMAN
select BOARD_LATE_INIT
select SUPPORT_SPL
select IMX8QM
diff --git a/board/advantech/imx8qm_rom7720_a1/imximage.cfg b/board/advantech/imx8qm_rom7720_a1/imximage.cfg
index e324c7ca37..58eeef54f6 100644
--- a/board/advantech/imx8qm_rom7720_a1/imximage.cfg
+++ b/board/advantech/imx8qm_rom7720_a1/imximage.cfg
@@ -5,8 +5,8 @@
#define __ASSEMBLY__
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
+
/* SoC type IMX8QM */
SOC_TYPE IMX8QM
/* Append seco container image */
diff --git a/configs/imx8qm_rom7720_a1_4G_defconfig b/configs/imx8qm_rom7720_a1_4G_defconfig
index fb43fa1962..26afa4f8d7 100644
--- a/configs/imx8qm_rom7720_a1_4G_defconfig
+++ b/configs/imx8qm_rom7720_a1_4G_defconfig
@@ -18,7 +18,7 @@ CONFIG_SPL=y
CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_BOOTDELAY=3
CONFIG_LOG=y
CONFIG_BOARD_EARLY_INIT_F=y
diff --git a/doc/board/advantech/imx8qm-rom7720-a1.rst b/doc/board/advantech/imx8qm-rom7720-a1.rst
index bd4be1dbeb..953cf01fde 100644
--- a/doc/board/advantech/imx8qm-rom7720-a1.rst
+++ b/doc/board/advantech/imx8qm-rom7720-a1.rst
@@ -57,8 +57,7 @@ Build U-Boot
$ export ATF_LOAD_ADDR=0x80000000
$ export BL33_LOAD_ADDR=0x80020000
$ make imx8qm_rom7720_a1_4G_defconfig
- $ make u-boot.bin
- $ make flash.bin
+ $ make
Flash the binary into the SD card
---------------------------------
--
2.17.1
next reply other threads:[~2022-01-26 15:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-26 15:52 Oliver Graute [this message]
2022-04-20 15:14 ` [PATCH v1] imx: imx8qm-rom7720: switch to binman Tom Rini
2022-05-03 8:10 ` Oliver Graute
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220126155204.25099-1-oliver.graute@kococonnector.com \
--to=oliver.graute@kococonnector.com \
--cc=aford173@gmail.com \
--cc=andrey.zhizhikin@leica-geosystems.com \
--cc=festevam@gmail.com \
--cc=marcel.ziswiler@toradex.com \
--cc=oliver.graute@gmail.com \
--cc=peng.fan@nxp.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox