From: Andre Przywara <andre.przywara@arm.com>
To: Jesse Taube <mr.bossman075@gmail.com>
Cc: u-boot@lists.denx.de, jagan@amarulasolutions.com,
hdegoede@redhat.com, sjg@chromium.org, icenowy@aosc.io,
marek.behun@nic.cz, festevam@denx.de, narmstrong@baylibre.com,
tharvey@gateworks.com, christianshewitt@gmail.com,
pbrobinson@gmail.com, jernej.skrabec@gmail.com, hs@denx.de,
samuel@sholland.org, arnaud.ferraris@gmail.com,
giulio.benetti@benettiengineering.com,
thirtythreeforty@gmail.com
Subject: Re: [PATCH v2 00/12] Add support for SUNIV and F1C100s.
Date: Sat, 29 Jan 2022 02:40:34 +0000 [thread overview]
Message-ID: <20220129024034.78c2f30a@slackpad.fritz.box> (raw)
In-Reply-To: <20220126135329.2997430-1-Mr.Bossman075@gmail.com>
On Wed, 26 Jan 2022 08:53:17 -0500
Jesse Taube <mr.bossman075@gmail.com> wrote:
Hi Jesse,
> This patch set aims to add support for the SUNIV and F1C100s.
> Support has been in linux for a while now, but not in u-boot.
>
> This patchset contains:
> - CPU specific initialization code
> - SUNIV dram driver
> - SUNIV clock driver adaption
> - SUNIV gpio driver adaption
> - SUNIV uart driver adaption
> - F1C100s basic support
>
> The SUNIV seems to be similar to sun6i and sun4i, so we use code from
> both platforms. We also add suniv to the cpu dircetory as it uses arm926ejs.
>
> NOTE: To work this will need patchset "sunxi: remove lowlevel_init".
So I think I am done with reviewing this version. Please send an
updated version. If there are smaller issues left, I will probably just
fix them up while committing.
Thanks for your good and prompt work on this!
Cheers,
Andre
>
> Icenowy Zheng (11):
> arm: arm926ej-s: start.S: port save_boot_params support from armv7
> code
> arm: arm926ej-s: Add sunxi code
> dt-bindings: clock: Add initial suniv headers
> dt-bindings: reset: Add initial suniv headers
> ARM: sunxi: Add clock and uart to sunxi headers
> sunxi: Add F1C100s DRAM initial support
> sunxi: board: Add support for SUNIV
> configs: sunxi: Add common SUNIV header
> mach-sunxi: Add support for SUNIV architecture
> ARM: dts: suniv: Add device tree files for F1C100s
> configs: sunxi: Add support for Lichee Pi Nano
>
> Jesse Taube (1):
> mach-sunxi: Move timer code to mach folder
>
> arch/arm/cpu/arm926ejs/Makefile | 1 +
> arch/arm/cpu/arm926ejs/start.S | 19 +
> arch/arm/cpu/arm926ejs/sunxi/Makefile | 5 +
> arch/arm/cpu/arm926ejs/sunxi/config.mk | 6 +
> arch/arm/cpu/arm926ejs/sunxi/fel_utils.S | 33 ++
> arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds | 48 ++
> arch/arm/dts/Makefile | 2 +
> arch/arm/dts/suniv-f1c100s-licheepi-nano.dts | 29 ++
> arch/arm/dts/suniv-f1c100s.dtsi | 6 +
> arch/arm/dts/suniv.dtsi | 160 +++++++
> arch/arm/include/asm/arch-sunxi/clock.h | 2 +-
> arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 13 +
> arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 6 +
> arch/arm/include/asm/arch-sunxi/dram.h | 2 +
> arch/arm/include/asm/arch-sunxi/dram_suniv.h | 46 ++
> arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
> arch/arm/mach-sunxi/Kconfig | 16 +-
> arch/arm/mach-sunxi/Makefile | 5 +
> arch/arm/mach-sunxi/board.c | 28 +-
> arch/arm/mach-sunxi/clock.c | 3 +-
> arch/arm/mach-sunxi/clock_sun6i.c | 46 +-
> arch/arm/mach-sunxi/cpu_info.c | 2 +
> arch/arm/mach-sunxi/dram_helpers.c | 4 +
> arch/arm/mach-sunxi/dram_suniv.c | 420 ++++++++++++++++++
> .../{cpu/armv7/sunxi => mach-sunxi}/timer.c | 7 +-
> board/sunxi/board.c | 4 +-
> configs/licheepi_nano_defconfig | 15 +
> include/configs/suniv.h | 14 +
> include/configs/sunxi-common.h | 59 ++-
> include/dt-bindings/clock/suniv-ccu.h | 69 +++
> include/dt-bindings/reset/suniv-ccu.h | 37 ++
> 31 files changed, 1080 insertions(+), 28 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/sunxi/Makefile
> create mode 100644 arch/arm/cpu/arm926ejs/sunxi/config.mk
> create mode 100644 arch/arm/cpu/arm926ejs/sunxi/fel_utils.S
> create mode 100644 arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds
> create mode 100644 arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> create mode 100644 arch/arm/dts/suniv-f1c100s.dtsi
> create mode 100644 arch/arm/dts/suniv.dtsi
> create mode 100644 arch/arm/include/asm/arch-sunxi/dram_suniv.h
> create mode 100644 arch/arm/mach-sunxi/dram_suniv.c
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/timer.c (97%)
> create mode 100644 configs/licheepi_nano_defconfig
> create mode 100644 include/configs/suniv.h
> create mode 100644 include/dt-bindings/clock/suniv-ccu.h
> create mode 100644 include/dt-bindings/reset/suniv-ccu.h
>
next prev parent reply other threads:[~2022-01-29 2:40 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-26 13:53 [PATCH v2 00/12] Add support for SUNIV and F1C100s Jesse Taube
2022-01-26 13:53 ` [PATCH v2 01/12] arm: arm926ej-s: start.S: port save_boot_params support from armv7 code Jesse Taube
2022-01-26 13:53 ` [PATCH v2 02/12] mach-sunxi: Move timer code to mach folder Jesse Taube
2022-01-27 10:21 ` Andre Przywara
2022-01-27 20:40 ` Jesse Taube
2022-01-28 0:41 ` Andre Przywara
2022-01-28 4:51 ` Jesse Taube
2022-01-28 14:28 ` Andre Przywara
2022-01-28 22:40 ` Jesse Taube
2022-01-26 13:53 ` [PATCH v2 03/12] arm: arm926ej-s: Add sunxi code Jesse Taube
2022-01-29 2:05 ` Andre Przywara
2022-01-29 2:42 ` Jesse Taube
2022-01-29 11:22 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 04/12] dt-bindings: clock: Add initial suniv headers Jesse Taube
2022-01-29 2:05 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 05/12] dt-bindings: reset: " Jesse Taube
2022-01-26 13:53 ` [PATCH v2 06/12] ARM: sunxi: Add clock and uart to sunxi headers Jesse Taube
2022-01-29 2:11 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 07/12] sunxi: Add F1C100s DRAM initial support Jesse Taube
2022-01-26 13:53 ` [PATCH v2 08/12] sunxi: board: Add support for SUNIV Jesse Taube
2022-01-26 13:53 ` [PATCH v2 09/12] configs: sunxi: Add common SUNIV header Jesse Taube
2022-01-26 17:43 ` Jesse Taube
2022-01-29 2:18 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 10/12] mach-sunxi: Add support for SUNIV architecture Jesse Taube
2022-01-26 13:53 ` [PATCH v2 11/12] ARM: dts: suniv: Add device tree files for F1C100s Jesse Taube
2022-01-29 2:25 ` Andre Przywara
2022-01-29 2:31 ` Jesse Taube
2022-01-29 2:37 ` Andre Przywara
2022-01-29 3:01 ` Jesse Taube
2022-01-29 11:25 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 12/12] configs: sunxi: Add support for Lichee Pi Nano Jesse Taube
2022-01-29 2:40 ` Andre Przywara [this message]
2022-01-29 2:44 ` [PATCH v2 00/12] Add support for SUNIV and F1C100s Jesse Taube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220129024034.78c2f30a@slackpad.fritz.box \
--to=andre.przywara@arm.com \
--cc=arnaud.ferraris@gmail.com \
--cc=christianshewitt@gmail.com \
--cc=festevam@denx.de \
--cc=giulio.benetti@benettiengineering.com \
--cc=hdegoede@redhat.com \
--cc=hs@denx.de \
--cc=icenowy@aosc.io \
--cc=jagan@amarulasolutions.com \
--cc=jernej.skrabec@gmail.com \
--cc=marek.behun@nic.cz \
--cc=mr.bossman075@gmail.com \
--cc=narmstrong@baylibre.com \
--cc=pbrobinson@gmail.com \
--cc=samuel@sholland.org \
--cc=sjg@chromium.org \
--cc=tharvey@gateworks.com \
--cc=thirtythreeforty@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox