[PATCH] imx8m: lock id_swap_bypass bit in tzc380 enable

[sbabic@denx.de]

> According to TRM for i.MX8M Nano and Plus, GPR10 register contains lock
> bit for TZASC_ID_SWAP_BYPASS bit. This bit is required to be set in
> order to avoid AXI bus errors when GPU is enabled on the platform.
> TZASC_ID_SWAP_BYPASS bit is alread set for all imx8m applicable
> derivatives, but is missing a lock settings to be applied.
> Set the TZASC_ID_SWAP_BYPASS_LOCK bit for those derivatives which have
> it implemented.
> Since we're here, provide also names to bits from TRM instead of using
> BIT() macro in the code.
> Fixes: deca6cfbf5d7 ("imx8mn: set BYPASS ID SWAP to avoid AXI bus errors")
> Fixes: a07c7181296f ("imx8mp: set BYPASS ID SWAP to avoid AXI bus errors")
> Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
> Cc: Peng Fan <peng.fan@nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================