* [PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export
@ 2022-01-12 20:49 Fabio Estevam
2022-01-12 20:49 ` [PATCH 2/3] doc: sl-mx8mm: " Fabio Estevam
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Fabio Estevam @ 2022-01-12 20:49 UTC (permalink / raw)
To: sbabic; +Cc: u-boot, heiko.thiery, marcel.ziswiler, Fabio Estevam
imx8mm-u-boot.dtsi passes the ATF load address via the
'entry' and 'load' properties.
Remove the step that performs the ATF_LOAD_ADDR export, which is
now unneeded.
Signed-off-by: Fabio Estevam <festevam@denx.de>
---
doc/board/nxp/imx8mm_evk.rst | 1 -
1 file changed, 1 deletion(-)
diff --git a/doc/board/nxp/imx8mm_evk.rst b/doc/board/nxp/imx8mm_evk.rst
index b377c4de276d..b9e67b954fc2 100644
--- a/doc/board/nxp/imx8mm_evk.rst
+++ b/doc/board/nxp/imx8mm_evk.rst
@@ -42,7 +42,6 @@ Build U-Boot
$ export CROSS_COMPILE=aarch64-poky-linux-
$ make imx8mm_evk_defconfig
- $ export ATF_LOAD_ADDR=0x920000
$ make
Burn the flash.bin to MicroSD card offset 33KB:
--
2.25.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/3] doc: sl-mx8mm: Remove ATF_LOAD_ADDR export
2022-01-12 20:49 [PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export Fabio Estevam
@ 2022-01-12 20:49 ` Fabio Estevam
2022-01-12 21:18 ` Patrick Wildt
2022-02-05 16:44 ` sbabic
2022-01-12 20:49 ` [PATCH 3/3] doc: verdin-imx8mm: " Fabio Estevam
` (2 subsequent siblings)
3 siblings, 2 replies; 9+ messages in thread
From: Fabio Estevam @ 2022-01-12 20:49 UTC (permalink / raw)
To: sbabic; +Cc: u-boot, heiko.thiery, marcel.ziswiler, Fabio Estevam
imx8mm-u-boot.dtsi passes the ATF load address via the
'entry' and 'load' properties.
Remove the step that performs the ATF_LOAD_ADDR export, which is
now unneeded.
Signed-off-by: Fabio Estevam <festevam@denx.de>
---
doc/board/kontron/sl-mx8mm.rst | 1 -
1 file changed, 1 deletion(-)
diff --git a/doc/board/kontron/sl-mx8mm.rst b/doc/board/kontron/sl-mx8mm.rst
index 74ff228f2038..7a4c1134b54d 100644
--- a/doc/board/kontron/sl-mx8mm.rst
+++ b/doc/board/kontron/sl-mx8mm.rst
@@ -62,7 +62,6 @@ Build U-Boot
.. code-block:: bash
$ make kontron-sl-mx8mm_defconfig
- $ export ATF_LOAD_ADDR=0x920000
$ make
Burn the flash.bin to SD card at an offset of 33 KiB:
--
2.25.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 3/3] doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export
2022-01-12 20:49 [PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export Fabio Estevam
2022-01-12 20:49 ` [PATCH 2/3] doc: sl-mx8mm: " Fabio Estevam
@ 2022-01-12 20:49 ` Fabio Estevam
2022-01-12 21:18 ` Patrick Wildt
2022-02-05 16:41 ` sbabic
2022-01-12 21:17 ` [PATCH 1/3] doc: imx8mm_evk: " Patrick Wildt
2022-02-05 16:42 ` sbabic
3 siblings, 2 replies; 9+ messages in thread
From: Fabio Estevam @ 2022-01-12 20:49 UTC (permalink / raw)
To: sbabic; +Cc: u-boot, heiko.thiery, marcel.ziswiler, Fabio Estevam
imx8mm-u-boot.dtsi passes the ATF load address via the
'entry' and 'load' properties.
Remove the step that performs the ATF_LOAD_ADDR export, which is
now unneeded.
Signed-off-by: Fabio Estevam <festevam@denx.de>
---
doc/board/toradex/verdin-imx8mm.rst | 1 -
1 file changed, 1 deletion(-)
diff --git a/doc/board/toradex/verdin-imx8mm.rst b/doc/board/toradex/verdin-imx8mm.rst
index a11c82da2f5c..439128adceba 100644
--- a/doc/board/toradex/verdin-imx8mm.rst
+++ b/doc/board/toradex/verdin-imx8mm.rst
@@ -44,7 +44,6 @@ Build U-Boot
.. code-block:: bash
$ export CROSS_COMPILE=aarch64-linux-gnu-
- $ export ATF_LOAD_ADDR=0x920000
$ make verdin-imx8mm_defconfig
$ make
--
2.25.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export
2022-01-12 20:49 [PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export Fabio Estevam
2022-01-12 20:49 ` [PATCH 2/3] doc: sl-mx8mm: " Fabio Estevam
2022-01-12 20:49 ` [PATCH 3/3] doc: verdin-imx8mm: " Fabio Estevam
@ 2022-01-12 21:17 ` Patrick Wildt
2022-02-05 16:42 ` sbabic
3 siblings, 0 replies; 9+ messages in thread
From: Patrick Wildt @ 2022-01-12 21:17 UTC (permalink / raw)
To: Fabio Estevam; +Cc: sbabic, u-boot, heiko.thiery, marcel.ziswiler
On Wed, Jan 12, 2022 at 05:49:44PM -0300, Fabio Estevam wrote:
> imx8mm-u-boot.dtsi passes the ATF load address via the
> 'entry' and 'load' properties.
>
> Remove the step that performs the ATF_LOAD_ADDR export, which is
> now unneeded.
>
> Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Patrick Wildt <patrick@blueri.se>
> ---
> doc/board/nxp/imx8mm_evk.rst | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/doc/board/nxp/imx8mm_evk.rst b/doc/board/nxp/imx8mm_evk.rst
> index b377c4de276d..b9e67b954fc2 100644
> --- a/doc/board/nxp/imx8mm_evk.rst
> +++ b/doc/board/nxp/imx8mm_evk.rst
> @@ -42,7 +42,6 @@ Build U-Boot
>
> $ export CROSS_COMPILE=aarch64-poky-linux-
> $ make imx8mm_evk_defconfig
> - $ export ATF_LOAD_ADDR=0x920000
> $ make
>
> Burn the flash.bin to MicroSD card offset 33KB:
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/3] doc: sl-mx8mm: Remove ATF_LOAD_ADDR export
2022-01-12 20:49 ` [PATCH 2/3] doc: sl-mx8mm: " Fabio Estevam
@ 2022-01-12 21:18 ` Patrick Wildt
2022-02-05 16:44 ` sbabic
1 sibling, 0 replies; 9+ messages in thread
From: Patrick Wildt @ 2022-01-12 21:18 UTC (permalink / raw)
To: Fabio Estevam; +Cc: sbabic, u-boot, heiko.thiery, marcel.ziswiler
On Wed, Jan 12, 2022 at 05:49:45PM -0300, Fabio Estevam wrote:
> imx8mm-u-boot.dtsi passes the ATF load address via the
> 'entry' and 'load' properties.
>
> Remove the step that performs the ATF_LOAD_ADDR export, which is
> now unneeded.
>
> Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Patrick Wildt <patrick@blueri.se>
> ---
> doc/board/kontron/sl-mx8mm.rst | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/doc/board/kontron/sl-mx8mm.rst b/doc/board/kontron/sl-mx8mm.rst
> index 74ff228f2038..7a4c1134b54d 100644
> --- a/doc/board/kontron/sl-mx8mm.rst
> +++ b/doc/board/kontron/sl-mx8mm.rst
> @@ -62,7 +62,6 @@ Build U-Boot
> .. code-block:: bash
>
> $ make kontron-sl-mx8mm_defconfig
> - $ export ATF_LOAD_ADDR=0x920000
> $ make
>
> Burn the flash.bin to SD card at an offset of 33 KiB:
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 3/3] doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export
2022-01-12 20:49 ` [PATCH 3/3] doc: verdin-imx8mm: " Fabio Estevam
@ 2022-01-12 21:18 ` Patrick Wildt
2022-02-05 16:41 ` sbabic
1 sibling, 0 replies; 9+ messages in thread
From: Patrick Wildt @ 2022-01-12 21:18 UTC (permalink / raw)
To: Fabio Estevam; +Cc: sbabic, u-boot, heiko.thiery, marcel.ziswiler
On Wed, Jan 12, 2022 at 05:49:46PM -0300, Fabio Estevam wrote:
> imx8mm-u-boot.dtsi passes the ATF load address via the
> 'entry' and 'load' properties.
>
> Remove the step that performs the ATF_LOAD_ADDR export, which is
> now unneeded.
>
> Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Patrick Wildt <patrick@blueri.se>
> ---
> doc/board/toradex/verdin-imx8mm.rst | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/doc/board/toradex/verdin-imx8mm.rst b/doc/board/toradex/verdin-imx8mm.rst
> index a11c82da2f5c..439128adceba 100644
> --- a/doc/board/toradex/verdin-imx8mm.rst
> +++ b/doc/board/toradex/verdin-imx8mm.rst
> @@ -44,7 +44,6 @@ Build U-Boot
> .. code-block:: bash
>
> $ export CROSS_COMPILE=aarch64-linux-gnu-
> - $ export ATF_LOAD_ADDR=0x920000
> $ make verdin-imx8mm_defconfig
> $ make
>
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 3/3] doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export
2022-01-12 20:49 ` [PATCH 3/3] doc: verdin-imx8mm: " Fabio Estevam
2022-01-12 21:18 ` Patrick Wildt
@ 2022-02-05 16:41 ` sbabic
1 sibling, 0 replies; 9+ messages in thread
From: sbabic @ 2022-02-05 16:41 UTC (permalink / raw)
To: Fabio Estevam, u-boot
> imx8mm-u-boot.dtsi passes the ATF load address via the
> 'entry' and 'load' properties.
> Remove the step that performs the ATF_LOAD_ADDR export, which is
> now unneeded.
> Signed-off-by: Fabio Estevam <festevam@denx.de>
> Reviewed-by: Patrick Wildt <patrick@blueri.se>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export
2022-01-12 20:49 [PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export Fabio Estevam
` (2 preceding siblings ...)
2022-01-12 21:17 ` [PATCH 1/3] doc: imx8mm_evk: " Patrick Wildt
@ 2022-02-05 16:42 ` sbabic
3 siblings, 0 replies; 9+ messages in thread
From: sbabic @ 2022-02-05 16:42 UTC (permalink / raw)
To: Fabio Estevam, u-boot
> imx8mm-u-boot.dtsi passes the ATF load address via the
> 'entry' and 'load' properties.
> Remove the step that performs the ATF_LOAD_ADDR export, which is
> now unneeded.
> Signed-off-by: Fabio Estevam <festevam@denx.de>
> Reviewed-by: Patrick Wildt <patrick@blueri.se>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 2/3] doc: sl-mx8mm: Remove ATF_LOAD_ADDR export
2022-01-12 20:49 ` [PATCH 2/3] doc: sl-mx8mm: " Fabio Estevam
2022-01-12 21:18 ` Patrick Wildt
@ 2022-02-05 16:44 ` sbabic
1 sibling, 0 replies; 9+ messages in thread
From: sbabic @ 2022-02-05 16:44 UTC (permalink / raw)
To: Fabio Estevam, u-boot
> imx8mm-u-boot.dtsi passes the ATF load address via the
> 'entry' and 'load' properties.
> Remove the step that performs the ATF_LOAD_ADDR export, which is
> now unneeded.
> Signed-off-by: Fabio Estevam <festevam@denx.de>
> Reviewed-by: Patrick Wildt <patrick@blueri.se>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-02-05 16:52 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-01-12 20:49 [PATCH 1/3] doc: imx8mm_evk: Remove ATF_LOAD_ADDR export Fabio Estevam
2022-01-12 20:49 ` [PATCH 2/3] doc: sl-mx8mm: " Fabio Estevam
2022-01-12 21:18 ` Patrick Wildt
2022-02-05 16:44 ` sbabic
2022-01-12 20:49 ` [PATCH 3/3] doc: verdin-imx8mm: " Fabio Estevam
2022-01-12 21:18 ` Patrick Wildt
2022-02-05 16:41 ` sbabic
2022-01-12 21:17 ` [PATCH 1/3] doc: imx8mm_evk: " Patrick Wildt
2022-02-05 16:42 ` sbabic
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox