From: sbabic@denx.de
To: Marek Vasut <marex@denx.de>,u-boot@lists.denx.de
Subject: [PATCH] ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board
Date: Sat, 5 Feb 2022 17:43:45 +0100 (CET) [thread overview]
Message-ID: <20220205164348.6AE5C83CDB@phobos.denx.de> (raw)
In-Reply-To: <20211128025318.367051-1-marex@denx.de>
> From: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> The PDK2 board is capable of running both 100M and 1G ethernet. However,
> the i.MX6 has only one ethernet MAC, so it is possible to configure
> either 100M or 1G Ethernet. In case of 100M option, the PHY is on the
> SoM and the signals are routed to a RJ45 port. For 1G the PHY is on
> the PDK2 board with another RJ45 port. 100M and 1G ethernet use
> different signal pins from the i.MX6, but share the MDIO bus.
> This SoM board combination is used to demonstrate how to enable 1G
> ethernet configuration.
> Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> Cc: Stefano Babic <sbabic@denx.de>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
prev parent reply other threads:[~2022-02-05 16:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-28 2:53 [PATCH] ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board Marek Vasut
2022-02-05 16:43 ` sbabic [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220205164348.6AE5C83CDB@phobos.denx.de \
--to=sbabic@denx.de \
--cc=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox