[PATCH 1/2] ARM: imx: imx8mn-ddr4-evk: Fix boot from SD card

[Marek Vasut <marex@denx.de>]

Enable missing config options to make the board boot from SD card.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
---
 configs/imx8mn_evk_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig
index 865d657a6d1..1117096d6ee 100644
--- a/configs/imx8mn_evk_defconfig
+++ b/configs/imx8mn_evk_defconfig
@@ -14,6 +14,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx8mn-evk"
 CONFIG_SPL_TEXT_BASE=0x912000
 CONFIG_TARGET_IMX8MN_EVK=y
+CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
@@ -30,6 +31,9 @@ CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
+CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
@@ -64,9 +68,12 @@ CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS400_ES_SUPPORT=y
 CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
 CONFIG_FSL_USDHC=y
 CONFIG_PHYLIB=y
 CONFIG_DM_ETH=y
@@ -76,6 +83,7 @@ CONFIG_PINCTRL_IMX8M=y
 CONFIG_DM_PMIC=y
 CONFIG_SPL_DM_PMIC_PCA9450=y
 CONFIG_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_MXC_UART=y
-- 
2.34.1