From: "Pali Rohár" <pali@kernel.org>
To: Stefan Roese <sr@denx.de>,
Konstantin Porotchkin <kostap@marvell.com>,
Marek Behun <marek.behun@nic.cz>,
Vladimir Vid <vladimir.vid@sartura.hr>,
Luka Perkov <luka.perkov@sartura.hr>,
Luis Torres <luis.torres@methode.com>,
Scott Roberts <scott.roberts@telus.com>,
Paul Arola <paul.arola@telus.com>
Cc: u-boot@lists.denx.de
Subject: [PATCH u-boot-marvell 3/9] usb: ehci: ehci-marvell: Update compatible string to official DT bindings
Date: Mon, 14 Feb 2022 11:34:24 +0100 [thread overview]
Message-ID: <20220214103430.24242-4-pali@kernel.org> (raw)
In-Reply-To: <20220214103430.24242-1-pali@kernel.org>
Official DT bindings use compatible string marvell,armada-3700-ehci.
Update drivers and DTS files.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
arch/arm/dts/armada-37xx.dtsi | 2 +-
drivers/phy/marvell/comphy_a3700.c | 2 +-
drivers/usb/host/ehci-marvell.c | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/armada-37xx.dtsi b/arch/arm/dts/armada-37xx.dtsi
index b363212dc8bd..a427d9cf6218 100644
--- a/arch/arm/dts/armada-37xx.dtsi
+++ b/arch/arm/dts/armada-37xx.dtsi
@@ -234,7 +234,7 @@
};
usb2: usb@5e000 {
- compatible = "marvell,armada3700-ehci";
+ compatible = "marvell,armada-3700-ehci";
reg = <0x5e000 0x450>;
status = "disabled";
};
diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c
index 7cde59b8e28f..c490dc69c695 100644
--- a/drivers/phy/marvell/comphy_a3700.c
+++ b/drivers/phy/marvell/comphy_a3700.c
@@ -937,7 +937,7 @@ void comphy_dedicated_phys_init(void)
*/
if (usb32 == 0) {
node = fdt_node_offset_by_compatible(
- blob, -1, "marvell,armada3700-ehci");
+ blob, -1, "marvell,armada-3700-ehci");
} else {
node = fdt_node_offset_by_compatible(
blob, -1, "marvell,armada3700-xhci");
diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c
index 5420bb9772b5..b7e60c690a4f 100644
--- a/drivers/usb/host/ehci-marvell.c
+++ b/drivers/usb/host/ehci-marvell.c
@@ -123,7 +123,7 @@ static int ehci_mvebu_probe(struct udevice *dev)
* Also, the address decoder doesn't need to get setup with this
* SoC, so don't call usb_brg_adrdec_setup().
*/
- if (device_is_compatible(dev, "marvell,armada3700-ehci"))
+ if (device_is_compatible(dev, "marvell,armada-3700-ehci"))
marvell_ehci_ops.powerup_fixup = marvell_ehci_powerup_fixup;
else
usb_brg_adrdec_setup((void *)priv->hcd_base);
@@ -142,7 +142,7 @@ static int ehci_mvebu_probe(struct udevice *dev)
static const struct udevice_id ehci_usb_ids[] = {
{ .compatible = "marvell,orion-ehci", },
- { .compatible = "marvell,armada3700-ehci", },
+ { .compatible = "marvell,armada-3700-ehci", },
{ }
};
--
2.20.1
next prev parent reply other threads:[~2022-02-14 10:35 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-14 10:34 [PATCH u-boot-marvell 0/9] arm: a37xx: Fix code and update DTS files to upstream version Pali Rohár
2022-02-14 10:34 ` [PATCH u-boot-marvell 1/9] rtc: ds1307: Add bindings for microchip, mcp7940x Pali Rohár
2022-02-15 9:23 ` [PATCH u-boot-marvell 1/9] rtc: ds1307: Add bindings for microchip,mcp7940x Stefan Roese
2022-02-14 10:34 ` [PATCH u-boot-marvell 2/9] phy: marvell: a3700: Update compatible string to official DT bindings Pali Rohár
2022-02-15 9:23 ` Stefan Roese
2022-02-14 10:34 ` Pali Rohár [this message]
2022-02-15 9:24 ` [PATCH u-boot-marvell 3/9] usb: ehci: ehci-marvell: " Stefan Roese
2022-02-14 10:34 ` [PATCH u-boot-marvell 4/9] watchdog: armada_37xx: Convert " Pali Rohár
2022-02-15 9:25 ` Stefan Roese
2022-02-14 10:34 ` [PATCH u-boot-marvell 5/9] arm: mvebu: turris_mox: Remove hardcoded ethernet node names Pali Rohár
2022-02-15 9:27 ` Stefan Roese
2022-02-14 10:34 ` [PATCH u-boot-marvell 6/9] arm: a37xx: Update sdhci pointers to official DT bindings Pali Rohár
2022-02-15 9:28 ` Stefan Roese
2022-02-15 9:32 ` Pali Rohár
2022-02-14 10:34 ` [PATCH u-boot-marvell 7/9] arm: a37xx: espressobin: Move U-Boot specific partitions node to -u-boot.dtsi Pali Rohár
2022-02-15 9:28 ` Stefan Roese
2022-02-14 10:34 ` [PATCH u-boot-marvell 8/9] arm: a37xx: espressobin: Explicitly enable eMMC node in -u-boot.dtsi Pali Rohár
2022-02-15 9:29 ` Stefan Roese
2022-02-14 10:34 ` [PATCH u-boot-marvell 9/9] arm: a37xx: Update DTS files to version from upstream Linux kernel Pali Rohár
2022-02-15 9:31 ` Stefan Roese
2022-02-17 15:37 ` [PATCH u-boot-marvell 0/9] arm: a37xx: Fix code and update DTS files to upstream version Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220214103430.24242-4-pali@kernel.org \
--to=pali@kernel.org \
--cc=kostap@marvell.com \
--cc=luis.torres@methode.com \
--cc=luka.perkov@sartura.hr \
--cc=marek.behun@nic.cz \
--cc=paul.arola@telus.com \
--cc=scott.roberts@telus.com \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
--cc=vladimir.vid@sartura.hr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox