From: "Pali Rohár" <pali@kernel.org>
To: "Stefan Roese" <sr@denx.de>, "Marek Behún" <marek.behun@nic.cz>,
"Konstantin Porotchkin" <kostap@marvell.com>,
"Vladimir Vid" <vladimir.vid@sartura.hr>
Cc: u-boot@lists.denx.de
Subject: [PATCH u-boot-mvebu 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code
Date: Thu, 17 Feb 2022 10:26:18 +0100 [thread overview]
Message-ID: <20220217092619.1445-5-pali@kernel.org> (raw)
In-Reply-To: <20220217092619.1445-1-pali@kernel.org>
Allow to specify input parameters, define all available mbox commands
supported by CZ.NIC secure firmware + Marvell fuse.bin firmware and fix
parsing response from Marvell OTP commands.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
arch/arm/mach-mvebu/armada3700/mbox.c | 16 ++++++++++++++--
arch/arm/mach-mvebu/include/mach/mbox.h | 19 ++++++++++++++++++-
board/CZ.NIC/turris_mox/mox_sp.c | 4 ++--
3 files changed, 34 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-mvebu/armada3700/mbox.c b/arch/arm/mach-mvebu/armada3700/mbox.c
index cb86b967c2eb..b67346d524bf 100644
--- a/arch/arm/mach-mvebu/armada3700/mbox.c
+++ b/arch/arm/mach-mvebu/armada3700/mbox.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Marek Behun <marek.behun@nic.cz>
+ * Copyright (C) 2021 Pali Rohár <pali@kernel.org>
*/
#include <common.h>
@@ -15,6 +16,7 @@
#define RWTM_CMD (RWTM_BASE + 0x40)
#define RWTM_CMD_RETSTATUS (RWTM_BASE + 0x80)
#define RWTM_CMD_STATUS(i) (size_t)(RWTM_BASE + 0x84 + (i) * 4)
+#define MAX_ARGS 16
#define RWTM_HOST_INT_RESET (RWTM_BASE + 0xc8)
#define RWTM_HOST_INT_MASK (RWTM_BASE + 0xcc)
@@ -27,15 +29,23 @@
#define MBOX_STS_ERROR(s) ((s) & (3 << 30))
#define MBOX_STS_VALUE(s) (((s) >> 10) & 0xfffff)
#define MBOX_STS_CMD(s) ((s) & 0x3ff)
+#define MBOX_STS_MARVELL_ERROR(s) ((s) == 0 ? 0 : (s) == 2 ? ETIMEDOUT : (s) == 3 ? EINVAL : (s) == 4 ? ENOSYS : EIO)
-int mbox_do_cmd(enum mbox_cmd cmd, u32 *out, int nout)
+int mbox_do_cmd(enum mbox_cmd cmd, u32 *in, int nin, u32 *out, int nout)
{
const int tries = 50;
int i;
u32 status;
+ if (nin > MAX_ARGS || nout > MAX_ARGS)
+ return -EINVAL;
+
clrbits_le32(RWTM_HOST_INT_MASK, SP_CMD_COMPLETE);
+ for (i = 0; i < nin; i++)
+ writel(in[i], RWTM_CMD_PARAM(i));
+ for (; i < MAX_ARGS; i++)
+ writel(0x0, RWTM_CMD_PARAM(i));
writel(cmd, RWTM_CMD);
for (i = 0; i < tries; ++i) {
@@ -57,9 +67,11 @@ int mbox_do_cmd(enum mbox_cmd cmd, u32 *out, int nout)
setbits_le32(RWTM_HOST_INT_RESET, SP_CMD_COMPLETE);
if (MBOX_STS_CMD(status) != cmd)
- return -EIO;
+ return -MBOX_STS_MARVELL_ERROR(status);
else if (MBOX_STS_ERROR(status) == MBOX_STS_FAIL)
return -(int)MBOX_STS_VALUE(status);
+ else if (MBOX_STS_ERROR(status) == MBOX_STS_BADCMD)
+ return -ENOSYS;
else if (MBOX_STS_ERROR(status) != MBOX_STS_SUCCESS)
return -EIO;
else
diff --git a/arch/arm/mach-mvebu/include/mach/mbox.h b/arch/arm/mach-mvebu/include/mach/mbox.h
index 981204935832..f1cb55f2bfe7 100644
--- a/arch/arm/mach-mvebu/include/mach/mbox.h
+++ b/arch/arm/mach-mvebu/include/mach/mbox.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2018 Marek Behun <marek.behun@nic.cz>
+ * Copyright (C) 2021 Pali Rohár <pali@kernel.org>
*/
#ifndef _MVEBU_MBOX_H
@@ -16,8 +17,24 @@ enum mbox_cmd {
MBOX_CMD_OTP_READ,
MBOX_CMD_OTP_WRITE,
+
+ MBOX_CMD_REBOOT,
+
+ /* OTP read commands supported by Marvell fuse.bin firmware */
+ MBOX_CMD_OTP_READ_1B = 257,
+ MBOX_CMD_OTP_READ_8B,
+ MBOX_CMD_OTP_READ_32B,
+ MBOX_CMD_OTP_READ_64B,
+ MBOX_CMD_OTP_READ_256B,
+
+ /* OTP write commands supported by Marvell fuse.bin firmware */
+ MBOX_CMD_OTP_WRITE_1B = 513,
+ MBOX_CMD_OTP_WRITE_8B,
+ MBOX_CMD_OTP_WRITE_32B,
+ MBOX_CMD_OTP_WRITE_64B,
+ MBOX_CMD_OTP_WRITE_256B,
};
-int mbox_do_cmd(enum mbox_cmd cmd, u32 *in, int nout);
+int mbox_do_cmd(enum mbox_cmd cmd, u32 *in, int nin, u32 *out, int nout);
#endif
diff --git a/board/CZ.NIC/turris_mox/mox_sp.c b/board/CZ.NIC/turris_mox/mox_sp.c
index 4de067bbebbb..93e96b014fca 100644
--- a/board/CZ.NIC/turris_mox/mox_sp.c
+++ b/board/CZ.NIC/turris_mox/mox_sp.c
@@ -19,7 +19,7 @@ const char *mox_sp_get_ecdsa_public_key(void)
if (public_key[0])
return public_key;
- res = mbox_do_cmd(MBOX_CMD_ECDSA_PUB_KEY, out, 16);
+ res = mbox_do_cmd(MBOX_CMD_ECDSA_PUB_KEY, NULL, 0, out, 16);
if (res < 0)
return NULL;
@@ -47,7 +47,7 @@ int mbox_sp_get_board_info(u64 *sn, u8 *mac1, u8 *mac2, int *bv, int *ram)
u32 out[8];
int res;
- res = mbox_do_cmd(MBOX_CMD_BOARD_INFO, out, 8);
+ res = mbox_do_cmd(MBOX_CMD_BOARD_INFO, NULL, 0, out, 8);
if (res < 0)
return res;
--
2.20.1
next prev parent reply other threads:[~2022-02-17 9:27 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-17 9:26 [PATCH u-boot-mvebu 0/5] arm: mvebu: a37xx: Add support for reading OTP Pali Rohár
2022-02-17 9:26 ` [PATCH u-boot-mvebu 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value Pali Rohár
2022-02-17 14:10 ` Marek Behún
2022-02-17 9:26 ` [PATCH u-boot-mvebu 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards Pali Rohár
2022-02-17 14:11 ` Marek Behún
2022-02-17 9:26 ` [PATCH u-boot-mvebu 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu Pali Rohár
2022-02-17 14:11 ` Marek Behún
2022-02-17 9:26 ` Pali Rohár [this message]
2022-02-17 14:16 ` [PATCH u-boot-mvebu 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code Marek Behún
2022-02-17 17:13 ` Pali Rohár
2022-02-17 18:40 ` Marek Behún
2022-02-17 9:26 ` [PATCH u-boot-mvebu 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values Pali Rohár
2022-02-17 14:31 ` Marek Behún
2022-02-17 16:50 ` Pali Rohár
2022-02-17 18:39 ` Marek Behún
2022-02-22 20:47 ` Pali Rohár
2022-02-23 14:50 ` Marek Behún
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 0/5] arm: mvebu: a37xx: Add support for reading OTP Pali Rohár
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value Pali Rohár
2022-02-18 14:15 ` Stefan Roese
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards Pali Rohár
2022-02-18 14:15 ` Stefan Roese
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu Pali Rohár
2022-02-18 14:15 ` Stefan Roese
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code Pali Rohár
2022-02-18 14:16 ` Stefan Roese
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values Pali Rohár
2022-02-17 20:54 ` Marek Behún
2022-02-18 14:16 ` Stefan Roese
2022-02-22 20:51 ` Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 0/5] arm: mvebu: a37xx: Add support for reading OTP Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values Pali Rohár
2022-03-08 11:42 ` [PATCH u-boot-mvebu v3 0/5] arm: mvebu: a37xx: Add support for reading OTP Pali Rohár
2022-03-08 11:57 ` Stefan Roese
2022-04-20 18:22 ` Pali Rohár
2022-04-21 6:25 ` Stefan Roese
2022-04-21 14:03 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220217092619.1445-5-pali@kernel.org \
--to=pali@kernel.org \
--cc=kostap@marvell.com \
--cc=marek.behun@nic.cz \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
--cc=vladimir.vid@sartura.hr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox