public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Peter Geis <pgwipeout@gmail.com>
Cc: Peter Geis <pgwipeout@gmail.com>, u-boot@lists.denx.de
Subject: [PATCH v1 00/11] rockchip fixes and extend rk3568 support
Date: Mon, 21 Feb 2022 20:31:19 -0500	[thread overview]
Message-ID: <20220222013131.3114990-1-pgwipeout@gmail.com> (raw)

to: Simon Glass <sjg@chromium.org>
to: Philipp Tomsich <philipp.tomsich@vrull.eu>
to: Kever Yang <kever.yang@rock-chips.com>
to: Lukasz Majewski <lukma@denx.de>
to: Sean Anderson <seanga2@gmail.com>
to: Peng Fan <peng.fan@nxp.com>
to: Jaehoon Chung <jh80.chung@samsung.com>
to: Heiko Stübner <heiko@sntech.de>
cc: u-boot@lists.denx.de

Good Evening,

The following is a few patches for rockchip mainline u-boot support.
Patches 1-3 are fixes for the rk3568 reset handler, rockchip emmc dma to
sram, and building the rockchip-sfc driver.
Patch 4 adds a sanity check for the minimum sfc frequency.
Patch 5 and 6 add adc support to spl and enable the rockchip recovery
handler in spl, before attempting to load u-boot.
Patch 7 enables rk3568 spl bootrom device detection.
Patch 8 enables automatic clock gating and other power saving features
on rk3568, which solves the chip running hotter compared to downstream.
Patch 9 and 10 move the dwc3 platform data to the chip specific code and
enable dwc3 otg support on rk3568.
Patch 11 is an RFC patch for fixing ram detection on rk3568. Downstream
goes about this a different way, where they implemented a special
library to handle this.

Please review and *especially test* patch 11.

Very Respectfully,
Peter Geis

Peter Geis (11):
  clk: rockchip: rk3568: fix reset handler
  mmc: sdhci: allow disabling sdma in spl
  spi: rockchip-sfc: fix building rockchip-sfc
  spi: rockchip-sfc: sanity check minimum freq
  spl: support adc drivers in spl
  rockchip: handle bootrom recovery mode in spl
  rockchip: rk3568: add boot device detection
  rockchip: rk3568: enable automatic clock gating
  rockchip: move dwc3 config to chip specific handler
  rockchip: rk3568: add dwc3 otg support
  [RFC] rockchip: rk356x: attempt to fix ram detection

 arch/arm/mach-rockchip/Kconfig         |   1 +
 arch/arm/mach-rockchip/Makefile        |   6 +-
 arch/arm/mach-rockchip/board.c         |  24 ------
 arch/arm/mach-rockchip/boot_mode.c     |   4 +-
 arch/arm/mach-rockchip/rk3399/rk3399.c |  29 +++++++
 arch/arm/mach-rockchip/rk3568/rk3568.c | 112 +++++++++++++++++++++++++
 arch/arm/mach-rockchip/sdram.c         |  19 +++--
 common/board_f.c                       |   7 ++
 common/spl/Kconfig                     |   5 ++
 drivers/Makefile                       |   1 +
 drivers/clk/rockchip/clk_rk3568.c      |   2 +
 drivers/mmc/Kconfig                    |   7 ++
 drivers/mmc/sdhci.c                    |   6 +-
 drivers/spi/rockchip_sfc.c             |   6 ++
 include/configs/rk3568_common.h        |   5 ++
 15 files changed, 197 insertions(+), 37 deletions(-)

-- 
2.25.1


             reply	other threads:[~2022-02-22  1:32 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-22  1:31 Peter Geis [this message]
2022-02-22  1:31 ` [PATCH v1 01/11] clk: rockchip: rk3568: fix reset handler Peter Geis
2022-03-12  2:24   ` Simon Glass
2022-03-12  3:32     ` Peter Geis
2022-03-12  5:02       ` Simon Glass
2022-03-14  8:51   ` Kever Yang
2023-01-04 18:30   ` Jagan Teki
2022-02-22  1:31 ` [PATCH v1 02/11] mmc: sdhci: allow disabling sdma in spl Peter Geis
2022-02-25  1:46   ` Jaehoon Chung
2022-03-14  8:41   ` Kever Yang
2022-02-22  1:31 ` [PATCH v1 03/11] spi: rockchip-sfc: fix building rockchip-sfc Peter Geis
2022-03-14  8:45   ` Kever Yang
2022-03-14 11:36     ` Peter Geis
2022-02-22  1:31 ` [PATCH v1 04/11] spi: rockchip-sfc: sanity check minimum freq Peter Geis
2022-03-14  8:53   ` Kever Yang
2022-03-15  2:10     ` Jon Lin
2022-02-22  1:31 ` [PATCH v1 05/11] spl: support adc drivers in spl Peter Geis
2022-02-22  1:31 ` [PATCH v1 06/11] rockchip: handle bootrom recovery mode " Peter Geis
2022-03-12  2:24   ` Simon Glass
2022-03-12  3:37     ` Peter Geis
2022-03-14  9:08   ` Kever Yang
2022-03-14 11:51     ` Peter Geis
2022-03-14 11:59   ` Philipp Tomsich
2022-03-14 12:34     ` Peter Geis
2022-02-22  1:31 ` [PATCH v1 07/11] rockchip: rk3568: add boot device detection Peter Geis
2022-03-12  2:24   ` Simon Glass
2022-03-12  3:34     ` Peter Geis
2022-02-22  1:31 ` [PATCH v1 08/11] rockchip: rk3568: enable automatic clock gating Peter Geis
2022-03-12  2:24   ` Simon Glass
2022-03-14  8:52   ` Kever Yang
2022-02-22  1:31 ` [PATCH v1 09/11] rockchip: move dwc3 config to chip specific handler Peter Geis
2022-03-12  2:24   ` Simon Glass
2023-02-27  7:10   ` Jagan Teki
2022-02-22  1:31 ` [PATCH v1 10/11] rockchip: rk3568: add dwc3 otg support Peter Geis
2022-03-12  2:24   ` Simon Glass
2022-03-12  3:38     ` Peter Geis
2022-02-22  1:31 ` [PATCH v1 11/11] [RFC] rockchip: rk356x: attempt to fix ram detection Peter Geis
2022-03-12  2:24   ` Simon Glass
2022-03-12  3:54     ` Peter Geis
2022-03-12  5:02       ` Simon Glass
2022-03-12 14:46 ` [PATCH v1 00/11] rockchip fixes and extend rk3568 support Kever Yang
2022-03-14  8:56 ` Kever Yang
2022-03-14 11:42   ` Peter Geis
2022-03-14  9:06 ` Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220222013131.3114990-1-pgwipeout@gmail.com \
    --to=pgwipeout@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox