[PATCH v1 06/11] rockchip: handle bootrom recovery mode in spl

[Peter Geis <pgwipeout@gmail.com>]

Fixup the bootrom recovery mode code to function in spl, so we can
handle recovery mode in case u-boot loading is broken.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 arch/arm/mach-rockchip/Makefile        |  6 +++---
 arch/arm/mach-rockchip/boot_mode.c     |  4 +++-
 arch/arm/mach-rockchip/rk3568/rk3568.c | 23 +++++++++++++++++++++++
 3 files changed, 29 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 00aef0ecee6a..53aff25ce8f6 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -15,13 +15,13 @@ obj-tpl-$(CONFIG_ROCKCHIP_PX30) += px30-board-tpl.o
 
 obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
 
-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
-
 # Always include boot_mode.o, as we bypass it (i.e. turn it off)
 # inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0.  This way,
 # we can have the preprocessor correctly recognise both 0x0 and 0
 # meaning "turn it off".
-obj-y += boot_mode.o
+obj-$(CONFIG_ARCH_ROCKCHIP) += boot_mode.o
+
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o
 obj-$(CONFIG_MISC_INIT_R) += misc.o
 endif
diff --git a/arch/arm/mach-rockchip/boot_mode.c b/arch/arm/mach-rockchip/boot_mode.c
index 1a1a887fc2cd..43cb369465a2 100644
--- a/arch/arm/mach-rockchip/boot_mode.c
+++ b/arch/arm/mach-rockchip/boot_mode.c
@@ -51,7 +51,7 @@ __weak int rockchip_dnl_key_pressed(void)
 	ret = -ENODEV;
 	uclass_foreach_dev(dev, uc) {
 		if (!strncmp(dev->name, "saradc", 6)) {
-			ret = adc_channel_single_shot(dev->name, 1, &val);
+			ret = adc_channel_single_shot(dev->name, 0, &val);
 			break;
 		}
 	}
@@ -89,6 +89,7 @@ int setup_boot_mode(void)
 	boot_mode = readl(reg);
 	debug("%s: boot mode 0x%08x\n", __func__, boot_mode);
 
+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
 	/* Clear boot mode */
 	writel(BOOT_NORMAL, reg);
 
@@ -102,6 +103,7 @@ int setup_boot_mode(void)
 		env_set("preboot", "setenv preboot; ums mmc 0");
 		break;
 	}
+#endif
 
 	return 0;
 }
diff --git a/arch/arm/mach-rockchip/rk3568/rk3568.c b/arch/arm/mach-rockchip/rk3568/rk3568.c
index 22eeb77d41fa..4e23feb9417f 100644
--- a/arch/arm/mach-rockchip/rk3568/rk3568.c
+++ b/arch/arm/mach-rockchip/rk3568/rk3568.c
@@ -104,3 +104,26 @@ int arch_cpu_init(void)
 #endif
 	return 0;
 }
+
+#ifdef CONFIG_SPL_BUILD
+
+void __weak led_setup(void)
+{
+}
+
+void spl_board_init(void)
+{
+	led_setup();
+
+#if defined(SPL_DM_REGULATOR)
+	/*
+	 * Turning the eMMC and SPI back on (if disabled via the Qseven
+	 * BIOS_ENABLE) signal is done through a always-on regulator).
+	 */
+	if (regulators_enable_boot_on(false))
+		debug("%s: Cannot enable boot on regulator\n", __func__);
+#endif
+
+	setup_boot_mode();
+}
+#endif
-- 
2.25.1