From: "Pali Rohár" <pali@kernel.org>
To: "Stefan Roese" <sr@denx.de>, "Marek Behún" <marek.behun@nic.cz>,
"Konstantin Porotchkin" <kostap@marvell.com>,
"Vladimir Vid" <vladimir.vid@sartura.hr>
Cc: u-boot@lists.denx.de
Subject: [PATCH u-boot-mvebu v3 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards
Date: Wed, 23 Feb 2022 14:15:46 +0100 [thread overview]
Message-ID: <20220223131549.11991-3-pali@kernel.org> (raw)
In-Reply-To: <20220223131549.11991-1-pali@kernel.org>
Allow to read OTP bits via U-Boot fuse command on all Armada 3720 boards.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
---
configs/mvebu_db-88f3720_defconfig | 2 ++
configs/mvebu_espressobin-88f3720_defconfig | 2 ++
configs/turris_mox_defconfig | 2 ++
configs/uDPU_defconfig | 2 ++
4 files changed, 8 insertions(+)
diff --git a/configs/mvebu_db-88f3720_defconfig b/configs/mvebu_db-88f3720_defconfig
index b600217692f1..6cc90fa54266 100644
--- a/configs/mvebu_db-88f3720_defconfig
+++ b/configs/mvebu_db-88f3720_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=1
CONFIG_TARGET_MVEBU_ARMADA_37XX=y
+CONFIG_MVEBU_EFUSE=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x3f0000
CONFIG_ENV_SECT_SIZE=0x10000
@@ -24,6 +25,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_EARLY_INIT_R=y
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
diff --git a/configs/mvebu_espressobin-88f3720_defconfig b/configs/mvebu_espressobin-88f3720_defconfig
index 4b8206a38f1b..f8196eab82e5 100644
--- a/configs/mvebu_espressobin-88f3720_defconfig
+++ b/configs/mvebu_espressobin-88f3720_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=1
CONFIG_TARGET_MVEBU_ARMADA_37XX=y
+CONFIG_MVEBU_EFUSE=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x3F0000
CONFIG_ENV_SECT_SIZE=0x10000
@@ -26,6 +27,7 @@ CONFIG_ARCH_EARLY_INIT_R=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
diff --git a/configs/turris_mox_defconfig b/configs/turris_mox_defconfig
index 84a0b4c2b20e..25e417c94562 100644
--- a/configs/turris_mox_defconfig
+++ b/configs/turris_mox_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=2
CONFIG_TARGET_TURRIS_MOX=y
+CONFIG_MVEBU_EFUSE=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x180000
CONFIG_ENV_SECT_SIZE=0x10000
@@ -31,6 +32,7 @@ CONFIG_MISC_INIT_R=y
CONFIG_CMD_SHA1SUM=y
CONFIG_CMD_CLK=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig
index b5f2115e6332..7698e080e2a2 100644
--- a/configs/uDPU_defconfig
+++ b/configs/uDPU_defconfig
@@ -4,6 +4,7 @@ CONFIG_ARCH_MVEBU=y
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_MVEBU_ARMADA_37XX=y
+CONFIG_MVEBU_EFUSE=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x180000
CONFIG_ENV_SECT_SIZE=0x10000
@@ -29,6 +30,7 @@ CONFIG_SYS_PROMPT="uDPU>> "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
--
2.20.1
next prev parent reply other threads:[~2022-02-23 13:18 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-17 9:26 [PATCH u-boot-mvebu 0/5] arm: mvebu: a37xx: Add support for reading OTP Pali Rohár
2022-02-17 9:26 ` [PATCH u-boot-mvebu 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value Pali Rohár
2022-02-17 14:10 ` Marek Behún
2022-02-17 9:26 ` [PATCH u-boot-mvebu 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards Pali Rohár
2022-02-17 14:11 ` Marek Behún
2022-02-17 9:26 ` [PATCH u-boot-mvebu 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu Pali Rohár
2022-02-17 14:11 ` Marek Behún
2022-02-17 9:26 ` [PATCH u-boot-mvebu 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code Pali Rohár
2022-02-17 14:16 ` Marek Behún
2022-02-17 17:13 ` Pali Rohár
2022-02-17 18:40 ` Marek Behún
2022-02-17 9:26 ` [PATCH u-boot-mvebu 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values Pali Rohár
2022-02-17 14:31 ` Marek Behún
2022-02-17 16:50 ` Pali Rohár
2022-02-17 18:39 ` Marek Behún
2022-02-22 20:47 ` Pali Rohár
2022-02-23 14:50 ` Marek Behún
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 0/5] arm: mvebu: a37xx: Add support for reading OTP Pali Rohár
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value Pali Rohár
2022-02-18 14:15 ` Stefan Roese
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards Pali Rohár
2022-02-18 14:15 ` Stefan Roese
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu Pali Rohár
2022-02-18 14:15 ` Stefan Roese
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code Pali Rohár
2022-02-18 14:16 ` Stefan Roese
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values Pali Rohár
2022-02-17 20:54 ` Marek Behún
2022-02-18 14:16 ` Stefan Roese
2022-02-22 20:51 ` Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 0/5] arm: mvebu: a37xx: Add support for reading OTP Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value Pali Rohár
2022-02-23 13:15 ` Pali Rohár [this message]
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values Pali Rohár
2022-03-08 11:42 ` [PATCH u-boot-mvebu v3 0/5] arm: mvebu: a37xx: Add support for reading OTP Pali Rohár
2022-03-08 11:57 ` Stefan Roese
2022-04-20 18:22 ` Pali Rohár
2022-04-21 6:25 ` Stefan Roese
2022-04-21 14:03 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220223131549.11991-3-pali@kernel.org \
--to=pali@kernel.org \
--cc=kostap@marvell.com \
--cc=marek.behun@nic.cz \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
--cc=vladimir.vid@sartura.hr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox