From: "Clément Léger" <clement.leger@bootlin.com>
To: Eugen Hristev <eugen.hristev@microchip.com>,
Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: u-boot@lists.denx.de,
"Nicolas Ferre" <nicolas.ferre@microchip.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Claudiu Beznea" <Claudiu.Beznea@microchip.com>,
"Clément Léger" <clement.leger@bootlin.com>
Subject: [PATCH v4 3/3] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER
Date: Fri, 4 Mar 2022 10:45:22 +0100 [thread overview]
Message-ID: <20220304094522.47714-4-clement.leger@bootlin.com> (raw)
In-Reply-To: <20220304094522.47714-1-clement.leger@bootlin.com>
This will allow using the TCB timer instead of the PIT one when running
under OP-TEE.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
configs/sama5d2_icp_mmc_defconfig | 1 +
configs/sama5d2_ptc_ek_mmc_defconfig | 1 +
configs/sama5d2_ptc_ek_nandflash_defconfig | 1 +
configs/sama5d2_xplained_emmc_defconfig | 1 +
configs/sama5d2_xplained_mmc_defconfig | 1 +
configs/sama5d2_xplained_qspiflash_defconfig | 1 +
configs/sama5d2_xplained_spiflash_defconfig | 1 +
7 files changed, 7 insertions(+)
diff --git a/configs/sama5d2_icp_mmc_defconfig b/configs/sama5d2_icp_mmc_defconfig
index 7761a57e0c..2eb2e92110 100644
--- a/configs/sama5d2_icp_mmc_defconfig
+++ b/configs/sama5d2_icp_mmc_defconfig
@@ -83,5 +83,6 @@ CONFIG_ATMEL_USART=y
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
CONFIG_OF_LIBFDT_OVERLAY=y
# CONFIG_EFI_LOADER_HII is not set
diff --git a/configs/sama5d2_ptc_ek_mmc_defconfig b/configs/sama5d2_ptc_ek_mmc_defconfig
index 9f458e100b..2a77f72734 100644
--- a/configs/sama5d2_ptc_ek_mmc_defconfig
+++ b/configs/sama5d2_ptc_ek_mmc_defconfig
@@ -72,6 +72,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_ptc_ek_nandflash_defconfig b/configs/sama5d2_ptc_ek_nandflash_defconfig
index 6460ff3dad..790e79019c 100644
--- a/configs/sama5d2_ptc_ek_nandflash_defconfig
+++ b/configs/sama5d2_ptc_ek_nandflash_defconfig
@@ -72,6 +72,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_xplained_emmc_defconfig b/configs/sama5d2_xplained_emmc_defconfig
index 844a9cde64..dfe120051f 100644
--- a/configs/sama5d2_xplained_emmc_defconfig
+++ b/configs/sama5d2_xplained_emmc_defconfig
@@ -91,6 +91,7 @@ CONFIG_ATMEL_QSPI=y
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig
index 0de0636587..910ff5c141 100644
--- a/configs/sama5d2_xplained_mmc_defconfig
+++ b/configs/sama5d2_xplained_mmc_defconfig
@@ -93,6 +93,7 @@ CONFIG_ATMEL_QSPI=y
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_xplained_qspiflash_defconfig b/configs/sama5d2_xplained_qspiflash_defconfig
index a6e002e59e..158ec4c70e 100644
--- a/configs/sama5d2_xplained_qspiflash_defconfig
+++ b/configs/sama5d2_xplained_qspiflash_defconfig
@@ -92,6 +92,7 @@ CONFIG_ATMEL_QSPI=y
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig
index 676385fe55..5d946d06cf 100644
--- a/configs/sama5d2_xplained_spiflash_defconfig
+++ b/configs/sama5d2_xplained_spiflash_defconfig
@@ -96,6 +96,7 @@ CONFIG_ATMEL_QSPI=y
CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
--
2.34.1
prev parent reply other threads:[~2022-03-04 9:47 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-04 9:45 [PATCH v4 0/3] add TCB driver for sama5d2 Clément Léger
2022-03-04 9:45 ` [PATCH v4 1/3] timer: atmel_tcb_timer: add atmel_tcb driver Clément Léger
2022-03-04 9:45 ` [PATCH v4 2/3] ARM: dts: at91: sama5d2: add TCB node Clément Léger
2022-03-04 9:46 ` Clément Léger
2022-03-04 9:49 ` Clément Léger
2022-03-04 10:14 ` Eugen.Hristev
2022-03-04 9:45 ` Clément Léger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220304094522.47714-4-clement.leger@bootlin.com \
--to=clement.leger@bootlin.com \
--cc=Claudiu.Beznea@microchip.com \
--cc=eugen.hristev@microchip.com \
--cc=ludovic.desroches@microchip.com \
--cc=nicolas.ferre@microchip.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox