[PATCH v4 0/3] add TCB driver for sama5d2

[PATCH v4 0/3] add TCB driver for sama5d2

[Clément Léger]

When booting under OP-TEE, the SYSC is secured which means the PIT is
also not accessible by non-secure world. The TCB 0 however is always
available for non-secure world and thus can be used.
This series add a TCB driver and enables it in sama5d2 configs.

---
Changes in v4:
- Add missing interrupts property to tcb node

Changes in v3:
- Remove useless defines
- Add printf in case of unsupported timers specified in device-tree
- Add "syscon" compatible to tcb node

Changes in v2:
- Reworked driver to use existing Linux bindings

Clément Léger (3):
  timer: atmel_tcb_timer: add atmel_tcb driver
  ARM: dts: at91: sama5d2: add TCB node
  configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER

 MAINTAINERS                                  |   1 +
 arch/arm/dts/sama5d2.dtsi                    |  16 ++
 configs/sama5d2_icp_mmc_defconfig            |   1 +
 configs/sama5d2_ptc_ek_mmc_defconfig         |   1 +
 configs/sama5d2_ptc_ek_nandflash_defconfig   |   1 +
 configs/sama5d2_xplained_emmc_defconfig      |   1 +
 configs/sama5d2_xplained_mmc_defconfig       |   1 +
 configs/sama5d2_xplained_qspiflash_defconfig |   1 +
 configs/sama5d2_xplained_spiflash_defconfig  |   1 +
 drivers/timer/Kconfig                        |   8 +
 drivers/timer/Makefile                       |   1 +
 drivers/timer/atmel_tcb_timer.c              | 155 +++++++++++++++++++
 12 files changed, 188 insertions(+)
 create mode 100644 drivers/timer/atmel_tcb_timer.c

-- 
2.34.1

[PATCH v4 1/3] timer: atmel_tcb_timer: add atmel_tcb driver

[Clément Léger]

Add a driver for the timer counter block that can be found on sama5d2.
This driver will be used when booting under OP-TEE since the pit timer
which is part of the SYSC is secured. Channel 1 & 2 are configured to
be chained together which allows to have a 64bits counter.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
 MAINTAINERS                     |   1 +
 drivers/timer/Kconfig           |   8 ++
 drivers/timer/Makefile          |   1 +
 drivers/timer/atmel_tcb_timer.c | 155 ++++++++++++++++++++++++++++++++
 4 files changed, 165 insertions(+)
 create mode 100644 drivers/timer/atmel_tcb_timer.c

diff --git a/MAINTAINERS b/MAINTAINERS
index fb171e0c68..73b46c4631 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -352,6 +352,7 @@ F:	arch/arm/mach-at91/
 F:	board/atmel/
 F:	drivers/cpu/at91_cpu.c
 F:	drivers/misc/microchip_flexcom.c
+F:	drivers/timer/atmel_tcb_timer.c
 F:	include/dt-bindings/mfd/atmel-flexcom.h
 F:	drivers/timer/mchp-pit64b-timer.c
 
diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig
index 8913142654..8fad59b81a 100644
--- a/drivers/timer/Kconfig
+++ b/drivers/timer/Kconfig
@@ -96,6 +96,14 @@ config ATMEL_PIT_TIMER
 	  it is designed to offer maximum accuracy and efficient management,
 	  even for systems with long response time.
 
+config ATMEL_TCB_TIMER
+	bool "Atmel timer counter support"
+	depends on TIMER
+	depends on ARCH_AT91
+	help
+	  Select this to enable the use of the timer counter as a monotonic
+	  counter.
+
 config CADENCE_TTC_TIMER
 	bool "Cadence TTC (Triple Timer Counter)"
 	depends on TIMER
diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile
index e2bd530eb0..58da6c1e84 100644
--- a/drivers/timer/Makefile
+++ b/drivers/timer/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARC_TIMER)	+= arc_timer.o
 obj-$(CONFIG_AST_TIMER)	+= ast_timer.o
 obj-$(CONFIG_ATCPIT100_TIMER) += atcpit100_timer.o
 obj-$(CONFIG_ATMEL_PIT_TIMER) += atmel_pit_timer.o
+obj-$(CONFIG_ATMEL_TCB_TIMER) += atmel_tcb_timer.o
 obj-$(CONFIG_CADENCE_TTC_TIMER)	+= cadence-ttc.o
 obj-$(CONFIG_DESIGNWARE_APB_TIMER)	+= dw-apb-timer.o
 obj-$(CONFIG_MPC83XX_TIMER) += mpc83xx_timer.o
diff --git a/drivers/timer/atmel_tcb_timer.c b/drivers/timer/atmel_tcb_timer.c
new file mode 100644
index 0000000000..b73b367227
--- /dev/null
+++ b/drivers/timer/atmel_tcb_timer.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Microchip Corporation
+ *
+ * Author: Clément Léger <clement.leger@bootlin.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <timer.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+
+#define TCB_CHAN(chan)		((chan) * 0x40)
+
+#define TCB_CCR(chan)		(0x0 + TCB_CHAN(chan))
+#define  TCB_CCR_SWTRG		0x4
+#define  TCB_CCR_CLKEN		0x1
+
+#define TCB_CMR(chan)		(0x4 + TCB_CHAN(chan))
+#define  TCB_CMR_WAVE		BIT(15)
+#define  TCB_CMR_TIMER_CLOCK0	0
+#define  TCB_CMR_XC1		6
+#define  TCB_CMR_ACPA_SET	BIT(16)
+#define  TCB_CMR_ACPC_CLEAR	(2 << 18)
+
+#define TCB_CV(chan)		(0x10 + TCB_CHAN(chan))
+
+#define TCB_RA(chan)		(0x14 + TCB_CHAN(chan))
+#define TCB_RC(chan)		(0x1c + TCB_CHAN(chan))
+
+#define TCB_IDR(chan)		(0x28 + TCB_CHAN(chan))
+
+#define TCB_BCR			0xc0
+#define  TCB_BCR_SYNC		0x1
+
+#define TCB_BMR			0xc4
+#define  TCB_BMR_TC1XC1S_TIOA0	(2 << 2)
+
+#define TCB_WPMR		0xe4
+#define  TCB_WPMR_WAKEY		0x54494d
+
+struct atmel_tcb_plat {
+	void __iomem *base;
+};
+
+static u64 atmel_tcb_get_count(struct udevice *dev)
+{
+	struct atmel_tcb_plat *plat = dev_get_plat(dev);
+	u64 cv0 = 0;
+	u64 cv1 = 0;
+
+	do {
+		cv1 = readl(plat->base + TCB_CV(1));
+		cv0 = readl(plat->base + TCB_CV(0));
+	} while (readl(plat->base + TCB_CV(1)) != cv1);
+
+	cv0 |= cv1 << 32;
+
+	return cv0;
+}
+
+static void atmel_tcb_configure(void __iomem *base)
+{
+	/* Disable write protection */
+	writel(TCB_WPMR_WAKEY, base + TCB_WPMR);
+
+	/* Disable all irqs for both channel 0 & 1 */
+	writel(0xff, base + TCB_IDR(0));
+	writel(0xff, base + TCB_IDR(1));
+
+	/*
+	 * In order to avoid wrapping, use a 64 bit counter by chaining
+	 * two channels.
+	 * Channel 0 is configured to generate a clock on TIOA0 which is cleared
+	 * when reaching 0x80000000 and set when reaching 0.
+	 */
+	writel(TCB_CMR_TIMER_CLOCK0 | TCB_CMR_WAVE | TCB_CMR_ACPA_SET
+		   | TCB_CMR_ACPC_CLEAR, base + TCB_CMR(0));
+	writel(0x80000000, base + TCB_RC(0));
+	writel(0x1, base + TCB_RA(0));
+	writel(TCB_CCR_CLKEN, base + TCB_CCR(0));
+
+	/* Channel 1 is configured to use TIOA0 as input */
+	writel(TCB_CMR_XC1 | TCB_CMR_WAVE, base + TCB_CMR(1));
+	writel(TCB_CCR_CLKEN, base + TCB_CCR(1));
+
+	/* Set XC1 input to be TIOA0 (ie output of Channel 0) */
+	writel(TCB_BMR_TC1XC1S_TIOA0, base + TCB_BMR);
+
+	/* Sync & start all timers */
+	writel(TCB_BCR_SYNC, base + TCB_BCR);
+}
+
+static int atmel_tcb_probe(struct udevice *dev)
+{
+	struct atmel_tcb_plat *plat = dev_get_plat(dev);
+	struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct clk clk;
+	ulong clk_rate;
+	int ret;
+
+	if (!device_is_compatible(dev->parent, "atmel,sama5d2-tcb"))
+		return -EINVAL;
+
+	/* Currently, we only support channel 0 and 1 to be chained */
+	if (dev_read_addr_index(dev, 0) != 0 &&
+	    dev_read_addr_index(dev, 1) != 1) {
+		printf("Error: only chained timers 0 and 1 are supported\n");
+		return -EINVAL;
+	}
+
+	ret = clk_get_by_name(dev->parent, "gclk", &clk);
+	if (ret)
+		return -EINVAL;
+
+	clk_rate = clk_get_rate(&clk);
+	if (!clk_rate)
+		return -EINVAL;
+
+	uc_priv->clock_rate = clk_rate;
+
+	atmel_tcb_configure(plat->base);
+
+	return 0;
+}
+
+static int atmel_tcb_of_to_plat(struct udevice *dev)
+{
+	struct atmel_tcb_plat *plat = dev_get_plat(dev);
+
+	plat->base = dev_read_addr_ptr(dev->parent);
+
+	return 0;
+}
+
+static const struct timer_ops atmel_tcb_ops = {
+	.get_count = atmel_tcb_get_count,
+};
+
+static const struct udevice_id atmel_tcb_ids[] = {
+	{ .compatible = "atmel,tcb-timer" },
+	{ }
+};
+
+U_BOOT_DRIVER(atmel_tcb) = {
+	.name = "atmel_tcb",
+	.id = UCLASS_TIMER,
+	.of_match = atmel_tcb_ids,
+	.of_to_plat = atmel_tcb_of_to_plat,
+	.plat_auto = sizeof(struct atmel_tcb_plat),
+	.probe = atmel_tcb_probe,
+	.ops = &atmel_tcb_ops,
+};
-- 
2.34.1

[PATCH v4 2/3] ARM: dts: at91: sama5d2: add TCB node

[Clément Léger]

Add the device-tree node to describe the TCB timer.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
 arch/arm/dts/sama5d2.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi
index 038cd73c03..54f3dd4c62 100644
--- a/arch/arm/dts/sama5d2.dtsi
+++ b/arch/arm/dts/sama5d2.dtsi
@@ -700,6 +700,22 @@
 				clocks = <&h32ck>;
 			};
 
+			tcb0: timer@f800c000 {
+				compatible = "atmel,sama5d2-tcb", "simple-mfd",
+					     "syscon";
+				reg = <0xf800c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>, <&tcb0_gclk>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+			};
+
 			watchdog@f8048040 {
 				compatible = "atmel,sama5d4-wdt";
 				reg = <0xf8048040 0x10>;
-- 
2.34.1

Re: [PATCH v4 2/3] ARM: dts: at91: sama5d2: add TCB node

[Clément Léger]

Le Fri,  4 Mar 2022 10:45:21 +0100,
Clément Léger <clement.leger@bootlin.com> a écrit :

> Add the device-tree node to describe the TCB timer.
> 
> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> ---
>  arch/arm/dts/sama5d2.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi
> index 038cd73c03..54f3dd4c62 100644
> --- a/arch/arm/dts/sama5d2.dtsi
> +++ b/arch/arm/dts/sama5d2.dtsi
> @@ -700,6 +700,22 @@
>  				clocks = <&h32ck>;
>  			};
>  
> +			tcb0: timer@f800c000 {
> +				compatible = "atmel,sama5d2-tcb", "simple-mfd",
> +					     "syscon";
> +				reg = <0xf800c000 0x100>;
> +				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;

And I forgot to include the file which defines IRQ_TYPE_LEVEL_HIGH. Will
need a V5 I guess.

> +				clocks = <&tcb0_clk>, <&tcb0_gclk>, <&clk32k>;
> +				clock-names = "t0_clk", "gclk", "slow_clk";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				timer0: timer@0 {
> +					compatible = "atmel,tcb-timer";
> +					reg = <0>, <1>;
> +				};
> +			};
> +
>  			watchdog@f8048040 {
>  				compatible = "atmel,sama5d4-wdt";
>  				reg = <0xf8048040 0x10>;



-- 
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com

Re: [PATCH v4 2/3] ARM: dts: at91: sama5d2: add TCB node

[Clément Léger]

Le Fri, 4 Mar 2022 10:46:45 +0100,
Clément Léger <clement.leger@bootlin.com> a écrit :

> Le Fri,  4 Mar 2022 10:45:21 +0100,
> Clément Léger <clement.leger@bootlin.com> a écrit :
> 
> > Add the device-tree node to describe the TCB timer.
> > 
> > Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> > ---
> >  arch/arm/dts/sama5d2.dtsi | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> > 
> > diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi
> > index 038cd73c03..54f3dd4c62 100644
> > --- a/arch/arm/dts/sama5d2.dtsi
> > +++ b/arch/arm/dts/sama5d2.dtsi
> > @@ -700,6 +700,22 @@
> >  				clocks = <&h32ck>;
> >  			};
> >  
> > +			tcb0: timer@f800c000 {
> > +				compatible = "atmel,sama5d2-tcb", "simple-mfd",
> > +					     "syscon";
> > +				reg = <0xf800c000 0x100>;
> > +				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;  
> 
> And I forgot to include the file which defines IRQ_TYPE_LEVEL_HIGH. Will
> need a V5 I guess.

By the way, this will also yield the following warning:

arch/arm/dts/at91-sama5d2_xplained.dtb: Warning (interrupts_property):
  /ahb/apb/timer@f800c000: Missing interrupt-parent

Because indeed, there is no interrupt controller declared at all in
this device-tree. What can I do about that ?

> 
> > +				clocks = <&tcb0_clk>, <&tcb0_gclk>, <&clk32k>;
> > +				clock-names = "t0_clk", "gclk", "slow_clk";
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +
> > +				timer0: timer@0 {
> > +					compatible = "atmel,tcb-timer";
> > +					reg = <0>, <1>;
> > +				};
> > +			};
> > +
> >  			watchdog@f8048040 {
> >  				compatible = "atmel,sama5d4-wdt";
> >  				reg = <0xf8048040 0x10>;  
> 
> 
> 



-- 
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com

Re: [PATCH v4 2/3] ARM: dts: at91: sama5d2: add TCB node

[Eugen.Hristev]

On 3/4/22 11:49 AM, Clément Léger wrote:
> Le Fri, 4 Mar 2022 10:46:45 +0100,
> Clément Léger <clement.leger@bootlin.com> a écrit :
> 
>> Le Fri,  4 Mar 2022 10:45:21 +0100,
>> Clément Léger <clement.leger@bootlin.com> a écrit :
>>
>>> Add the device-tree node to describe the TCB timer.
>>>
>>> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
>>> ---
>>>   arch/arm/dts/sama5d2.dtsi | 16 ++++++++++++++++
>>>   1 file changed, 16 insertions(+)
>>>
>>> diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi
>>> index 038cd73c03..54f3dd4c62 100644
>>> --- a/arch/arm/dts/sama5d2.dtsi
>>> +++ b/arch/arm/dts/sama5d2.dtsi
>>> @@ -700,6 +700,22 @@
>>>                              clocks = <&h32ck>;
>>>                      };
>>>
>>> +                   tcb0: timer@f800c000 {
>>> +                           compatible = "atmel,sama5d2-tcb", "simple-mfd",
>>> +                                        "syscon";
>>> +                           reg = <0xf800c000 0x100>;
>>> +                           interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
>>
>> And I forgot to include the file which defines IRQ_TYPE_LEVEL_HIGH. Will
>> need a V5 I guess.
> 
> By the way, this will also yield the following warning:
> 
> arch/arm/dts/at91-sama5d2_xplained.dtb: Warning (interrupts_property):
>    /ahb/apb/timer@f800c000: Missing interrupt-parent
> 
> Because indeed, there is no interrupt controller declared at all in
> this device-tree. What can I do about that ?

I know. You have to add the interrupt controller.
That's why I wanted to avoid having interrupts as mandatory, but it 
looks it's not possible.

> 
>>
>>> +                           clocks = <&tcb0_clk>, <&tcb0_gclk>, <&clk32k>;
>>> +                           clock-names = "t0_clk", "gclk", "slow_clk";
>>> +                           #address-cells = <1>;
>>> +                           #size-cells = <0>;
>>> +
>>> +                           timer0: timer@0 {
>>> +                                   compatible = "atmel,tcb-timer";
>>> +                                   reg = <0>, <1>;
>>> +                           };
>>> +                   };
>>> +
>>>                      watchdog@f8048040 {
>>>                              compatible = "atmel,sama5d4-wdt";
>>>                              reg = <0xf8048040 0x10>;
>>
>>
>>
> 
> 
> 
> --
> Clément Léger,
> Embedded Linux and Kernel engineer at Bootlin
> https://bootlin.com
> 

[PATCH v4 3/3] configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER

[Clément Léger]

This will allow using the TCB timer instead of the PIT one when running
under OP-TEE.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
 configs/sama5d2_icp_mmc_defconfig            | 1 +
 configs/sama5d2_ptc_ek_mmc_defconfig         | 1 +
 configs/sama5d2_ptc_ek_nandflash_defconfig   | 1 +
 configs/sama5d2_xplained_emmc_defconfig      | 1 +
 configs/sama5d2_xplained_mmc_defconfig       | 1 +
 configs/sama5d2_xplained_qspiflash_defconfig | 1 +
 configs/sama5d2_xplained_spiflash_defconfig  | 1 +
 7 files changed, 7 insertions(+)

diff --git a/configs/sama5d2_icp_mmc_defconfig b/configs/sama5d2_icp_mmc_defconfig
index 7761a57e0c..2eb2e92110 100644
--- a/configs/sama5d2_icp_mmc_defconfig
+++ b/configs/sama5d2_icp_mmc_defconfig
@@ -83,5 +83,6 @@ CONFIG_ATMEL_USART=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 # CONFIG_EFI_LOADER_HII is not set
diff --git a/configs/sama5d2_ptc_ek_mmc_defconfig b/configs/sama5d2_ptc_ek_mmc_defconfig
index 9f458e100b..2a77f72734 100644
--- a/configs/sama5d2_ptc_ek_mmc_defconfig
+++ b/configs/sama5d2_ptc_ek_mmc_defconfig
@@ -72,6 +72,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_ptc_ek_nandflash_defconfig b/configs/sama5d2_ptc_ek_nandflash_defconfig
index 6460ff3dad..790e79019c 100644
--- a/configs/sama5d2_ptc_ek_nandflash_defconfig
+++ b/configs/sama5d2_ptc_ek_nandflash_defconfig
@@ -72,6 +72,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_xplained_emmc_defconfig b/configs/sama5d2_xplained_emmc_defconfig
index 844a9cde64..dfe120051f 100644
--- a/configs/sama5d2_xplained_emmc_defconfig
+++ b/configs/sama5d2_xplained_emmc_defconfig
@@ -91,6 +91,7 @@ CONFIG_ATMEL_QSPI=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig
index 0de0636587..910ff5c141 100644
--- a/configs/sama5d2_xplained_mmc_defconfig
+++ b/configs/sama5d2_xplained_mmc_defconfig
@@ -93,6 +93,7 @@ CONFIG_ATMEL_QSPI=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_xplained_qspiflash_defconfig b/configs/sama5d2_xplained_qspiflash_defconfig
index a6e002e59e..158ec4c70e 100644
--- a/configs/sama5d2_xplained_qspiflash_defconfig
+++ b/configs/sama5d2_xplained_qspiflash_defconfig
@@ -92,6 +92,7 @@ CONFIG_ATMEL_QSPI=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig
index 676385fe55..5d946d06cf 100644
--- a/configs/sama5d2_xplained_spiflash_defconfig
+++ b/configs/sama5d2_xplained_spiflash_defconfig
@@ -96,6 +96,7 @@ CONFIG_ATMEL_QSPI=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_ATMEL_TCB_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
-- 
2.34.1