From: Lukasz Majewski <lukma@denx.de>
To: Tom Rini <trini@konsulko.com>, u-boot@lists.denx.de
Cc: "Lukasz Majewski" <lukma@denx.de>,
"Bin Meng" <bmeng.cn@gmail.com>,
"Jaehoon Chung" <jh80.chung@samsung.com>,
"Marek Behún" <marek.behun@nic.cz>,
"Simon Glass" <sjg@chromium.org>
Subject: [PATCH v2 2/3] power: pmic: Provide DM_PMIC support for tps65217 driver
Date: Sat, 12 Mar 2022 08:11:11 +0100 [thread overview]
Message-ID: <20220312071112.5276-2-lukma@denx.de> (raw)
In-Reply-To: <20220312071112.5276-1-lukma@denx.de>
The tps65217 PMIC driver is used with am335x SoC based designs.
It is used in the SPL (MLO) as well, so the DM conversion only is
for u-boot proper.
This driver only allows simple reading/writing/dumping of the content
of its registers and requires the DM_I2C for proper operation.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
(no changes since v1)
drivers/power/pmic/pmic_tps65217.c | 82 ++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/drivers/power/pmic/pmic_tps65217.c b/drivers/power/pmic/pmic_tps65217.c
index c7f532df4d..ccbf223593 100644
--- a/drivers/power/pmic/pmic_tps65217.c
+++ b/drivers/power/pmic/pmic_tps65217.c
@@ -6,8 +6,13 @@
#include <common.h>
#include <i2c.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <power/pmic.h>
#include <power/tps65217.h>
+#if !CONFIG_IS_ENABLED(DM_PMIC)
struct udevice *tps65217_dev __section(".data") = NULL;
/**
@@ -148,3 +153,80 @@ int power_tps65217_init(unsigned char bus)
#endif
return 0;
}
+#else /* CONFIG_IS_ENABLED(DM_PMIC) */
+static const struct pmic_child_info pmic_children_info[] = {
+ { .prefix = "ldo", .driver = "tps65217_ldo" },
+ { },
+};
+
+static int tps65217_reg_count(struct udevice *dev)
+{
+ return TPS65217_PMIC_NUM_OF_REGS;
+}
+
+static int tps65217_write(struct udevice *dev, uint reg, const uint8_t *buff,
+ int len)
+{
+ if (dm_i2c_write(dev, reg, buff, len)) {
+ pr_err("write error to device: %p register: %#x!\n", dev, reg);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int tps65217_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
+{
+ int ret;
+
+ ret = dm_i2c_read(dev, reg, buff, len);
+ if (ret) {
+ pr_err("read error %d from device: %p register: %#x!\n", ret,
+ dev, reg);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int tps65217_bind(struct udevice *dev)
+{
+ ofnode regulators_node;
+ int children;
+
+ regulators_node = dev_read_subnode(dev, "regulators");
+ if (!ofnode_valid(regulators_node)) {
+ debug("%s: %s regulators subnode not found!\n", __func__,
+ dev->name);
+ return -ENXIO;
+ }
+
+ debug("%s: '%s' - found regulators subnode\n", __func__, dev->name);
+
+ children = pmic_bind_children(dev, regulators_node, pmic_children_info);
+ if (!children)
+ debug("%s: %s - no child found\n", __func__, dev->name);
+
+ /* Always return success for this device */
+ return 0;
+}
+
+static struct dm_pmic_ops tps65217_ops = {
+ .reg_count = tps65217_reg_count,
+ .read = tps65217_read,
+ .write = tps65217_write,
+};
+
+static const struct udevice_id tps65217_ids[] = {
+ { .compatible = "ti,tps65217" },
+ { }
+};
+
+U_BOOT_DRIVER(pmic_tps65217) = {
+ .name = "tps65217 pmic",
+ .id = UCLASS_PMIC,
+ .of_match = tps65217_ids,
+ .bind = tps65217_bind,
+ .ops = &tps65217_ops,
+};
+#endif
--
2.20.1
next prev parent reply other threads:[~2022-03-12 7:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220312071140epcas1p22f13612e5ec9c079c2d20ea6b9246613@epcas1p2.samsung.com>
2022-03-12 7:11 ` [PATCH v2 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217 Lukasz Majewski
2022-03-12 7:11 ` Lukasz Majewski [this message]
2022-03-16 7:32 ` [PATCH v2 2/3] power: pmic: Provide DM_PMIC support for tps65217 driver Jaehoon Chung
2022-04-06 15:54 ` Tom Rini
2022-03-12 7:11 ` [PATCH v2 3/3] defconfig: Enable DM_PMIC and DM PMIC_TPS65217 on AM335x EVM board Lukasz Majewski
2022-03-16 7:32 ` Jaehoon Chung
2022-03-16 7:31 ` [PATCH v2 1/3] power: Rename CONFIG_POWER_TPS65217 with CONFIG_PMIC_TPS65217 Jaehoon Chung
2022-04-06 15:54 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220312071112.5276-2-lukma@denx.de \
--to=lukma@denx.de \
--cc=bmeng.cn@gmail.com \
--cc=jh80.chung@samsung.com \
--cc=marek.behun@nic.cz \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox