From: Leo Liang <ycliang@andestech.com>
To: <trini@konsulko.com>
Cc: <u-boot@lists.denx.de>, <rick@andestech.com>, <ycliang@andestech.com>
Subject: [PULL] u-boot-riscv/master
Date: Wed, 16 Mar 2022 10:56:40 +0800 [thread overview]
Message-ID: <20220316025640.GA7600@atcfdc88> (raw)
Hi Tom,
The following changes since commit c149bf41404e34014e37de32fac332892b11bd4a:
Prepare v2022.04-rc4 (2022-03-14 16:39:08 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-riscv.git
for you to fetch changes up to aa34e13346cf727197981c599f688b406005049a:
pinctrl: k210: Fix bias-pull-up (2022-03-15 17:43:11 +0800)
CI result shows no issue: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/11297
----------------------------------------------------------------
Damien Le Moal (4):
k210: use the board vendor name rather than the marketing name
k210: dts: add missing power bus clocks
k210: dts: align fpioa node with Linux
spi: dw: Force set K210 fifo length to 31
Niklas Cassel (3):
k210: dts: align plic node with Linux
pinctrl: k210: Fix loop in k210_pc_get_drive()
pinctrl: k210: Fix bias-pull-up
Sean Anderson (1):
spi: dw: Actually mask interrupts
MAINTAINERS | 12 +-
arch/riscv/dts/k210-maix-bit.dts | 3 +-
arch/riscv/dts/k210.dtsi | 177 ++++++++++++---------
board/sipeed/maix/maix.c | 2 +-
doc/board/sipeed/maix.rst | 20 +--
...ryte,k210-sysctl.txt => canaan,k210-sysctl.txt} | 8 +-
...ndryte,k210-fpioa.txt => canaan,k210-fpioa.txt} | 12 +-
doc/device-tree-bindings/spi/snps,dw-apb-ssi.txt | 4 +-
drivers/clk/Makefile | 2 +-
drivers/clk/{clk_kendryte.c => clk_k210.c} | 4 +-
drivers/pinctrl/Makefile | 2 +-
.../pinctrl/{pinctrl-kendryte.c => pinctrl-k210.c} | 25 ++-
drivers/spi/designware_spi.c | 20 ++-
include/configs/sipeed-maix.h | 2 +-
include/{kendryte => k210}/pll.h | 0
test/dm/k210_pll.c | 2 +-
16 files changed, 174 insertions(+), 121 deletions(-)
rename doc/device-tree-bindings/mfd/{kendryte,k210-sysctl.txt => canaan,k210-sysctl.txt} (78%)
rename doc/device-tree-bindings/pinctrl/{kendryte,k210-fpioa.txt => canaan,k210-fpioa.txt} (91%)
rename drivers/clk/{clk_kendryte.c => clk_k210.c} (99%)
rename drivers/pinctrl/{pinctrl-kendryte.c => pinctrl-k210.c} (97%)
rename include/{kendryte => k210}/pll.h (100%)
Best regards,
Leo
next reply other threads:[~2022-03-16 2:57 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-16 2:56 Leo Liang [this message]
2022-03-16 14:48 ` [PULL] u-boot-riscv/master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2025-10-29 7:38 Leo Liang
2025-10-29 18:07 ` Tom Rini
2025-07-17 7:02 Leo Liang
2025-07-17 19:02 ` Tom Rini
2025-06-02 8:31 Leo Liang
2025-06-02 22:36 ` Tom Rini
2024-09-10 2:38 Leo Liang
2024-09-10 17:22 ` Tom Rini
2023-10-19 11:41 Leo Liang
2023-10-19 14:57 ` Tom Rini
2023-10-05 8:10 Leo Liang
2023-10-05 17:46 ` Tom Rini
2023-09-26 5:21 Leo Liang
2023-09-26 14:05 ` Tom Rini
2023-09-21 1:36 Leo Liang
2023-09-21 19:57 ` Tom Rini
2023-09-05 3:30 Leo Liang
2023-09-05 18:43 ` Tom Rini
2023-08-10 10:32 Leo Liang
2023-08-10 16:22 ` Tom Rini
2023-08-02 5:48 Leo Liang
2023-08-02 6:27 ` Bin Meng
2023-08-02 9:31 ` Leo Liang
2023-08-03 0:59 ` Minda Chen
2023-07-24 8:01 Leo Liang
2023-07-24 16:41 ` Tom Rini
2023-07-12 6:58 Leo Liang
2023-07-12 19:43 ` Tom Rini
2023-04-21 0:41 Leo Liang
2023-04-23 16:15 ` Tom Rini
2023-02-17 12:12 Leo Liang
2023-02-17 15:01 ` Tom Rini
2023-02-19 6:09 ` Leo Liang
2023-02-02 6:30 Leo Liang
2023-02-02 19:18 ` Tom Rini
2022-12-08 11:23 Leo Liang
2022-12-08 16:24 ` Tom Rini
2022-11-16 6:16 Leo Liang
2022-11-16 18:01 ` Tom Rini
2022-11-03 7:04 Leo Liang
2022-11-03 16:57 ` Tom Rini
2022-11-04 0:28 ` Leo Liang
2022-10-20 12:36 Leo Liang
2022-10-20 19:03 ` Tom Rini
2022-09-06 6:07 Leo Liang
2022-09-06 15:50 ` Tom Rini
2022-08-11 21:38 Leo Liang
2022-08-12 12:17 ` Tom Rini
2022-05-27 2:36 Leo Liang
2022-05-27 13:30 ` Tom Rini
2022-05-28 9:02 ` Leo Liang
2022-05-30 15:05 ` Tom Rini
2022-08-11 22:22 ` Leo Liang
2022-04-06 4:43 Leo Liang
2022-04-06 15:55 ` Tom Rini
2022-02-10 15:16 Leo Liang
2022-02-11 0:35 ` Tom Rini
2021-12-03 6:19 Leo Liang
2021-12-04 17:50 ` Tom Rini
2021-11-09 2:40 Leo Liang
2021-11-09 13:45 ` Tom Rini
2021-10-20 7:14 Leo Liang
2021-10-21 11:51 ` Tom Rini
2021-10-07 11:51 Leo Liang
2021-10-07 15:43 ` Tom Rini
2021-09-07 8:20 Leo Liang
2021-09-07 15:33 ` Tom Rini
2021-08-19 8:56 Leo Liang
2021-08-19 14:13 ` Tom Rini
2021-07-22 2:15 Leo Liang
2021-07-22 12:15 ` Tom Rini
2021-07-07 15:21 Leo Liang
2021-07-07 17:33 ` Tom Rini
2021-07-06 16:02 Leo Liang
2021-07-06 19:52 ` Tom Rini
2021-07-07 4:05 ` Tianrui Wei
2021-06-17 3:31 Leo Liang
2021-06-17 14:51 ` Tom Rini
2021-05-31 10:16 Leo Liang
2021-05-31 18:59 ` Tom Rini
2021-05-26 8:12 Leo Liang
2021-05-26 15:24 ` Tom Rini
2021-05-27 8:57 ` Green Wan
2021-05-27 10:41 ` Leo Liang
2021-05-27 11:20 ` Tom Rini
2021-05-27 13:56 ` Green Wan
2021-05-20 2:19 Leo Liang
2021-05-21 14:07 ` Tom Rini
2021-05-18 1:48 Leo Liang
2021-05-18 18:17 ` Tom Rini
2021-05-14 11:10 Leo Liang
2021-05-14 12:23 ` Bin Meng
2021-05-15 12:09 ` Tom Rini
2021-05-07 1:06 Leo Liang
2021-05-07 1:09 ` Tom Rini
2021-05-07 1:41 ` Leo Liang
2021-05-07 1:55 ` Sean Anderson
2021-05-07 16:15 ` Tom Rini
2021-05-07 14:21 ` Dimitri John Ledkov
2021-05-07 14:35 ` Tom Rini
2021-05-07 1:49 ` Sean Anderson
2021-05-10 6:57 ` Leo Liang
2021-05-07 15:37 ` Tom Rini
2021-04-08 10:44 Leo Liang
2021-04-08 19:36 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220316025640.GA7600@atcfdc88 \
--to=ycliang@andestech.com \
--cc=rick@andestech.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox