[PATCH 08/11] at91: Switch to SD_BOOT / CONFIG_NAND_BOOT

public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed

From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Cc: Stelian Pop <stelian@popies.net>, Heiko Schocher <hs@denx.de>,
	Daniel Gorsulowski <daniel.gorsulowski@esd.eu>,
	Eugen Hristev <eugen.hristev@microchip.com>
Subject: [PATCH 08/11] at91: Switch to SD_BOOT / CONFIG_NAND_BOOT
Date: Thu, 24 Mar 2022 17:18:03 -0400	[thread overview]
Message-ID: <20220324211806.1553189-8-trini@konsulko.com> (raw)
In-Reply-To: <20220324211806.1553189-1-trini@konsulko.com>

The values CONFIG_SYS_USE_NANDFLASH and CONFIG_SYS_USE_MMC serve the
same purpose as CONFIG_SD_BOOT / CONFIG_NAND_BOOT so migrate to using
these switches instead as they're already in Kconfig.

Cc: Stelian Pop <stelian@popies.net>
Cc: Heiko Schocher <hs@denx.de>
Cc: Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Note that this is size neutral except on sama5d2_xplained_qspiflash
where previously we had enabled but slightly incomplete FAT support in
SPL.
---
 configs/at91sam9260ek_nandflash_defconfig      | 3 +--
 configs/at91sam9261ek_nandflash_defconfig      | 3 +--
 configs/at91sam9263ek_nandflash_defconfig      | 3 +--
 configs/at91sam9g10ek_nandflash_defconfig      | 3 +--
 configs/at91sam9g20ek_2mmc_defconfig           | 2 +-
 configs/at91sam9g20ek_2mmc_nandflash_defconfig | 3 +--
 configs/at91sam9g20ek_nandflash_defconfig      | 3 +--
 configs/at91sam9rlek_mmc_defconfig             | 2 +-
 configs/at91sam9rlek_nandflash_defconfig       | 3 +--
 configs/at91sam9xeek_nandflash_defconfig       | 3 +--
 configs/axm_defconfig                          | 2 +-
 configs/corvus_defconfig                       | 3 +--
 configs/meesc_defconfig                        | 3 +--
 configs/sama5d2_xplained_emmc_defconfig        | 1 -
 configs/sama5d2_xplained_mmc_defconfig         | 1 -
 configs/sama5d2_xplained_qspiflash_defconfig   | 2 +-
 configs/smartweb_defconfig                     | 2 +-
 configs/taurus_defconfig                       | 2 +-
 include/configs/smartweb.h                     | 1 -
 include/configs/taurus.h                       | 1 -
 20 files changed, 16 insertions(+), 30 deletions(-)

diff --git a/configs/at91sam9260ek_nandflash_defconfig b/configs/at91sam9260ek_nandflash_defconfig
index d87cb22138e7..644a950ceae7 100644
--- a/configs/at91sam9260ek_nandflash_defconfig
+++ b/configs/at91sam9260ek_nandflash_defconfig
@@ -17,7 +17,7 @@ CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH"
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
@@ -46,7 +46,6 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/at91sam9261ek_nandflash_defconfig b/configs/at91sam9261ek_nandflash_defconfig
index 32945796300a..20909d86bd77 100644
--- a/configs/at91sam9261ek_nandflash_defconfig
+++ b/configs/at91sam9261ek_nandflash_defconfig
@@ -16,7 +16,7 @@ CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH"
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
@@ -47,7 +47,6 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig
index 82d6ecdbc505..3ddadc43afa5 100644
--- a/configs/at91sam9263ek_nandflash_defconfig
+++ b/configs/at91sam9263ek_nandflash_defconfig
@@ -16,7 +16,7 @@ CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH"
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
@@ -49,7 +49,6 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/at91sam9g10ek_nandflash_defconfig b/configs/at91sam9g10ek_nandflash_defconfig
index 4ad3bc7de908..9b3274e443ce 100644
--- a/configs/at91sam9g10ek_nandflash_defconfig
+++ b/configs/at91sam9g10ek_nandflash_defconfig
@@ -16,7 +16,7 @@ CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH"
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
@@ -47,7 +47,6 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/at91sam9g20ek_2mmc_defconfig b/configs/at91sam9g20ek_2mmc_defconfig
index bb1908e580f2..c341b3673d2f 100644
--- a/configs/at91sam9g20ek_2mmc_defconfig
+++ b/configs/at91sam9g20ek_2mmc_defconfig
@@ -19,7 +19,7 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_MMC"
+CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
diff --git a/configs/at91sam9g20ek_2mmc_nandflash_defconfig b/configs/at91sam9g20ek_2mmc_nandflash_defconfig
index 95da2ca6ab34..e8bdae14e902 100644
--- a/configs/at91sam9g20ek_2mmc_nandflash_defconfig
+++ b/configs/at91sam9g20ek_2mmc_nandflash_defconfig
@@ -18,7 +18,7 @@ CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH"
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
@@ -48,7 +48,6 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/at91sam9g20ek_nandflash_defconfig b/configs/at91sam9g20ek_nandflash_defconfig
index c273357e600d..e73af995511e 100644
--- a/configs/at91sam9g20ek_nandflash_defconfig
+++ b/configs/at91sam9g20ek_nandflash_defconfig
@@ -17,7 +17,7 @@ CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH"
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
@@ -46,7 +46,6 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/at91sam9rlek_mmc_defconfig b/configs/at91sam9rlek_mmc_defconfig
index 6b6ee626b34b..69d97acaccc1 100644
--- a/configs/at91sam9rlek_mmc_defconfig
+++ b/configs/at91sam9rlek_mmc_defconfig
@@ -16,7 +16,7 @@ CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_MMC"
+CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootwait"
diff --git a/configs/at91sam9rlek_nandflash_defconfig b/configs/at91sam9rlek_nandflash_defconfig
index f77dafe61a76..1547275619d9 100644
--- a/configs/at91sam9rlek_nandflash_defconfig
+++ b/configs/at91sam9rlek_nandflash_defconfig
@@ -16,7 +16,7 @@ CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH"
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
@@ -46,7 +46,6 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 CONFIG_GENERIC_ATMEL_MCI=y
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/at91sam9xeek_nandflash_defconfig b/configs/at91sam9xeek_nandflash_defconfig
index d87cb22138e7..644a950ceae7 100644
--- a/configs/at91sam9xeek_nandflash_defconfig
+++ b/configs/at91sam9xeek_nandflash_defconfig
@@ -17,7 +17,7 @@ CONFIG_DEBUG_UART_CLOCK=132000000
 CONFIG_ENV_OFFSET_REDUND=0x100000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH"
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
@@ -46,7 +46,6 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
diff --git a/configs/axm_defconfig b/configs/axm_defconfig
index c4ef342fa181..910c98a44c84 100644
--- a/configs/axm_defconfig
+++ b/configs/axm_defconfig
@@ -30,6 +30,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run flash_self"
@@ -71,7 +72,6 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index 3dd55c08bb15..c0ae60f7e339 100644
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -22,7 +22,7 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x180000
 CONFIG_SYS_LOAD_ADDR=0x70000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH"
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
@@ -64,7 +64,6 @@ CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT=y
 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
diff --git a/configs/meesc_defconfig b/configs/meesc_defconfig
index 312c15f7deba..40b0f13acf6b 100644
--- a/configs/meesc_defconfig
+++ b/configs/meesc_defconfig
@@ -12,7 +12,7 @@ CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
 CONFIG_SYS_LOAD_ADDR=0x20100000
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH"
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
 CONFIG_BOARD_EARLY_INIT_F=y
@@ -36,7 +36,6 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
diff --git a/configs/sama5d2_xplained_emmc_defconfig b/configs/sama5d2_xplained_emmc_defconfig
index caacbabb7bf2..84b6bb697819 100644
--- a/configs/sama5d2_xplained_emmc_defconfig
+++ b/configs/sama5d2_xplained_emmc_defconfig
@@ -25,7 +25,6 @@ CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_MMC"
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig
index de9fe9d13b6c..6ae9e8470f9f 100644
--- a/configs/sama5d2_xplained_mmc_defconfig
+++ b/configs/sama5d2_xplained_mmc_defconfig
@@ -26,7 +26,6 @@ CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_MMC"
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
diff --git a/configs/sama5d2_xplained_qspiflash_defconfig b/configs/sama5d2_xplained_qspiflash_defconfig
index 24b509d06276..c857841a60ef 100644
--- a/configs/sama5d2_xplained_qspiflash_defconfig
+++ b/configs/sama5d2_xplained_qspiflash_defconfig
@@ -26,8 +26,8 @@ CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_MMC"
 CONFIG_QSPI_BOOT=y
+CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rw rootwait"
diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig
index 6ff898893594..0f96ada87971 100644
--- a/configs/smartweb_defconfig
+++ b/configs/smartweb_defconfig
@@ -24,6 +24,7 @@ CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x180000
 CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_FIT=y
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
@@ -65,7 +66,6 @@ CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig
index 76f902b1fa5e..68de985a5f5a 100644
--- a/configs/taurus_defconfig
+++ b/configs/taurus_defconfig
@@ -32,6 +32,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
@@ -77,7 +78,6 @@ CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 7c6cc480f0ea..aca7870d3aef 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -134,7 +134,6 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
-#define CONFIG_SYS_USE_NANDFLASH	1
 #define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	SZ_512K
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 3752fefc5549..77d80bfc9813 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -152,7 +152,6 @@
 #define CONFIG_SPL_BSS_MAX_SIZE		(3 * SZ_512)
 
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL	(2*32 + 14)
-#define CONFIG_SYS_USE_NANDFLASH	1
 #define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	SZ_512K
-- 
2.25.1

next prev parent reply	other threads:[~2022-03-24 21:19 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-24 21:17 [PATCH 01/11] db-mv784mp-gp: Rename CONFIG_DB_784MP_GP to CONFIG_TARGET_DB_MV784MP_GP Tom Rini
2022-03-24 21:17 ` [PATCH 02/11] M5329EVB, M5373EVB: Remove CONFIG_NANDFLASH_SIZE Tom Rini
2022-03-24 21:17 ` [PATCH 03/11] Convert CONFIG_DEEP_SLEEP to Kconfig Tom Rini
2022-03-24 21:17 ` [PATCH 04/11] exynos: Drop CONFIG_DEVICE_TREE_LIST Tom Rini
2022-03-25  0:21   ` Jaehoon Chung
2022-03-25  4:41     ` Minkyu Kang
2022-03-24 21:18 ` [PATCH 05/11] mx53loco: Convert CONFIG_DIALOG_POWER to Kconfig Tom Rini
2022-03-24 21:18 ` [PATCH 06/11] Convert CONFIG_E300 et al " Tom Rini
2022-03-24 21:18 ` [PATCH 07/11] Convert CONFIG_SRIO_PCIE_BOOT_SLAVE " Tom Rini
2022-03-24 21:18 ` Tom Rini [this message]
2022-03-24 21:18 ` [PATCH 09/11] Convert CONFIG_NORFLASH_PS32BIT " Tom Rini
2022-03-24 21:18 ` [PATCH 10/11] Convert CONFIG_SYS_MONITOR_BASE " Tom Rini
2022-03-24 21:18 ` [PATCH 11/11] global: Remove CONFIG_SYS_EXTRA_OPTIONS support Tom Rini
2022-03-28  6:35 ` [PATCH 01/11] db-mv784mp-gp: Rename CONFIG_DB_784MP_GP to CONFIG_TARGET_DB_MV784MP_GP Stefan Roese
2022-04-01 18:45 ` Tom Rini

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:d87cb22138e dfblob:644a950ceae dfblob:32945796300
dfblob:20909d86bd7 dfblob:82d6ecdbc50 dfblob:3ddadc43afa
dfblob:4ad3bc7de90 dfblob:9b3274e443c dfblob:bb1908e580f
dfblob:c341b3673d2 dfblob:95da2ca6ab3 dfblob:e8bdae14e90
dfblob:c273357e600 dfblob:e73af995511 dfblob:6b6ee626b34
dfblob:69d97acaccc dfblob:f77dafe61a7 dfblob:1547275619d
dfblob:d87cb22138e dfblob:644a950ceae dfblob:c4ef342fa18
dfblob:910c98a44c8 dfblob:3dd55c08bb1 dfblob:c0ae60f7e33
dfblob:312c15f7deb dfblob:40b0f13acf6 dfblob:caacbabb7bf
dfblob:84b6bb69781 dfblob:de9fe9d13b6 dfblob:6ae9e8470f9
dfblob:24b509d0627 dfblob:c857841a60e dfblob:6ff89889359
dfblob:0f96ada8797 dfblob:76f902b1fa5 dfblob:68de985a5f5
dfblob:7c6cc480f0e dfblob:aca7870d3ae dfblob:3752fefc554
dfblob:77d80bfc981 )
 OR (
bs:"[PATCH 08/11] at91: Switch to SD_BOOT / CONFIG_NAND_BOOT" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220324211806.1553189-8-trini@konsulko.com \
    --to=trini@konsulko.com \
    --cc=daniel.gorsulowski@esd.eu \
    --cc=eugen.hristev@microchip.com \
    --cc=hs@denx.de \
    --cc=stelian@popies.net \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox