From: "Paweł Anikiel" <pan@semihalf.com>
To: marex@denx.de, simon.k.r.goldschmidt@gmail.com,
tien.fong.chee@intel.com, michal.simek@xilinx.com
Cc: u-boot@lists.denx.de, sjg@chromium.org, festevam@denx.de,
jagan@amarulasolutions.com, andre.przywara@arm.com,
narmstrong@baylibre.com, pbrobinson@gmail.com,
tharvey@gateworks.com, paul.liu@linaro.org,
christianshewitt@gmail.com, adrian.fiergolski@fastree3d.com,
marek.behun@nic.cz, wd@denx.de, elly.siew.chin.lim@intel.com,
mw@semihalf.com, "Paweł Anikiel" <pan@semihalf.com>
Subject: [PATCH 00/11] Add Chameleon V3 support
Date: Fri, 1 Apr 2022 14:43:14 +0200 [thread overview]
Message-ID: <20220401124325.1810108-1-pan@semihalf.com> (raw)
The Google Chameleon V3 is a board made for testing both video and audio
interfaces of external devices. It has a connector compatible with the
Mercury+ AA1 module, which itself contains an Arria 10 SoCFPGA. The AA1
module comes in a few different configurations, the Chameleon V3 supports
ME-AA1-270-3E4-D11 and ME-AA1-480-2I3-D12E.
This patchset adds support for the Chameleon V3 (both versions), as well
as some bugfixes and optimizations, mostly in Arria 10 code.
Paweł Anikiel (11):
arm: dts: Add Mercury+ AA1 devicetree
arm: dts: Add Chameleonv3 handoff headers
arm: dts: Add Chameleonv3 devicetree
board: Add Chameleonv3 board dir
config: Add Chameleonv3 config
misc: atsha204a: Increase wake delay by tWHI
sysreset: socfpga: Use parent device for reading base address
socfpga: arria10: Replace delays with busy waiting in cm_full_cfg
socfpga: arria10: Improve bitstream loading speed
socfpga: arria10: Wait for fifo empty after writing bitstream
socfpga: arria10: Allow dcache_enable before relocation
arch/arm/dts/Makefile | 2 +
arch/arm/dts/socfpga_chameleonv3.dtsi | 21 ++
arch/arm/dts/socfpga_chameleonv3_270_3.dts | 9 +
.../dts/socfpga_chameleonv3_270_3_handoff.h | 305 ++++++++++++++++++
arch/arm/dts/socfpga_chameleonv3_480_2.dts | 9 +
.../dts/socfpga_chameleonv3_480_2_handoff.h | 305 ++++++++++++++++++
arch/arm/dts/socfpga_mercury_aa1.dtsi | 103 ++++++
arch/arm/mach-socfpga/Kconfig | 15 +
arch/arm/mach-socfpga/clock_manager.c | 7 +-
arch/arm/mach-socfpga/clock_manager_arria10.c | 12 +-
.../mach-socfpga/include/mach/clock_manager.h | 4 +
arch/arm/mach-socfpga/misc_arria10.c | 26 ++
board/google/chameleonv3/Makefile | 5 +
board/google/chameleonv3/board.c | 27 ++
board/google/chameleonv3/fpga.its | 28 ++
board/google/chameleonv3/fpga_early_io.its | 35 ++
board/google/chameleonv3/mercury_aa1.c | 43 +++
board/google/chameleonv3/mercury_aa1.h | 12 +
configs/socfpga_chameleonv3_defconfig | 29 ++
drivers/fpga/socfpga_arria10.c | 28 +-
drivers/misc/atsha204a-i2c.c | 5 +-
drivers/sysreset/sysreset_socfpga.c | 2 +-
include/configs/socfpga_chameleonv3.h | 49 +++
23 files changed, 1067 insertions(+), 14 deletions(-)
create mode 100644 arch/arm/dts/socfpga_chameleonv3.dtsi
create mode 100644 arch/arm/dts/socfpga_chameleonv3_270_3.dts
create mode 100644 arch/arm/dts/socfpga_chameleonv3_270_3_handoff.h
create mode 100644 arch/arm/dts/socfpga_chameleonv3_480_2.dts
create mode 100644 arch/arm/dts/socfpga_chameleonv3_480_2_handoff.h
create mode 100644 arch/arm/dts/socfpga_mercury_aa1.dtsi
create mode 100644 board/google/chameleonv3/Makefile
create mode 100644 board/google/chameleonv3/board.c
create mode 100644 board/google/chameleonv3/fpga.its
create mode 100644 board/google/chameleonv3/fpga_early_io.its
create mode 100644 board/google/chameleonv3/mercury_aa1.c
create mode 100644 board/google/chameleonv3/mercury_aa1.h
create mode 100644 configs/socfpga_chameleonv3_defconfig
create mode 100644 include/configs/socfpga_chameleonv3.h
--
2.35.1.1094.g7c7d902a7c-goog
next reply other threads:[~2022-04-01 13:42 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-01 12:43 Paweł Anikiel [this message]
2022-04-01 12:43 ` [PATCH 01/11] arm: dts: Add Mercury+ AA1 devicetree Paweł Anikiel
2022-04-11 18:34 ` Simon Glass
2022-04-14 14:07 ` Paweł Anikiel
2022-04-01 12:43 ` [PATCH 02/11] arm: dts: Add Chameleonv3 handoff headers Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-14 13:58 ` Paweł Anikiel
2022-04-01 12:43 ` [PATCH 03/11] arm: dts: Add Chameleonv3 devicetree Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-14 15:57 ` Paweł Anikiel
2022-04-01 12:43 ` [PATCH 04/11] board: Add Chameleonv3 board dir Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-01 12:43 ` [PATCH 05/11] config: Add Chameleonv3 config Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-01 12:43 ` [PATCH 06/11] misc: atsha204a: Increase wake delay by tWHI Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-01 12:43 ` [PATCH 07/11] sysreset: socfpga: Use parent device for reading base address Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-14 13:33 ` Paweł Anikiel
2022-04-01 12:43 ` [PATCH 08/11] socfpga: arria10: Replace delays with busy waiting in cm_full_cfg Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-01 12:43 ` [PATCH 09/11] socfpga: arria10: Improve bitstream loading speed Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-01 12:43 ` [PATCH 10/11] socfpga: arria10: Wait for fifo empty after writing bitstream Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-01 12:43 ` [PATCH 11/11] socfpga: arria10: Allow dcache_enable before relocation Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220401124325.1810108-1-pan@semihalf.com \
--to=pan@semihalf.com \
--cc=adrian.fiergolski@fastree3d.com \
--cc=andre.przywara@arm.com \
--cc=christianshewitt@gmail.com \
--cc=elly.siew.chin.lim@intel.com \
--cc=festevam@denx.de \
--cc=jagan@amarulasolutions.com \
--cc=marek.behun@nic.cz \
--cc=marex@denx.de \
--cc=michal.simek@xilinx.com \
--cc=mw@semihalf.com \
--cc=narmstrong@baylibre.com \
--cc=paul.liu@linaro.org \
--cc=pbrobinson@gmail.com \
--cc=simon.k.r.goldschmidt@gmail.com \
--cc=sjg@chromium.org \
--cc=tharvey@gateworks.com \
--cc=tien.fong.chee@intel.com \
--cc=u-boot@lists.denx.de \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox