From: "Paweł Anikiel" <pan@semihalf.com>
To: marex@denx.de, simon.k.r.goldschmidt@gmail.com,
tien.fong.chee@intel.com, michal.simek@xilinx.com
Cc: u-boot@lists.denx.de, sjg@chromium.org, festevam@denx.de,
jagan@amarulasolutions.com, andre.przywara@arm.com,
narmstrong@baylibre.com, pbrobinson@gmail.com,
tharvey@gateworks.com, paul.liu@linaro.org,
christianshewitt@gmail.com, adrian.fiergolski@fastree3d.com,
marek.behun@nic.cz, wd@denx.de, elly.siew.chin.lim@intel.com,
mw@semihalf.com, "Paweł Anikiel" <pan@semihalf.com>
Subject: [PATCH 05/11] config: Add Chameleonv3 config
Date: Fri, 1 Apr 2022 14:43:19 +0200 [thread overview]
Message-ID: <20220401124325.1810108-6-pan@semihalf.com> (raw)
In-Reply-To: <20220401124325.1810108-1-pan@semihalf.com>
Add defconfig and Kconfig files for Google Chameleon V3 board
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
---
arch/arm/mach-socfpga/Kconfig | 15 ++++++++
configs/socfpga_chameleonv3_defconfig | 29 ++++++++++++++++
include/configs/socfpga_chameleonv3.h | 49 +++++++++++++++++++++++++++
3 files changed, 93 insertions(+)
create mode 100644 configs/socfpga_chameleonv3_defconfig
create mode 100644 include/configs/socfpga_chameleonv3.h
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index bddfd44427..926d535e54 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -118,6 +118,10 @@ config TARGET_SOCFPGA_STRATIX10
select FPGA_INTEL_SDM_MAILBOX
select TARGET_SOCFPGA_SOC64
+config TARGET_SOCFPGA_CHAMELEONV3
+ bool
+ select TARGET_SOCFPGA_ARRIA10
+
choice
prompt "Altera SOCFPGA board select"
optional
@@ -143,6 +147,14 @@ config TARGET_SOCFPGA_ARRIA5_SOCDK
bool "Altera SOCFPGA SoCDK (Arria V)"
select TARGET_SOCFPGA_ARRIA5
+config TARGET_SOCFPGA_CHAMELEONV3_480_2
+ bool "Google Chameleon V3 480-2 (Arria 10)"
+ select TARGET_SOCFPGA_CHAMELEONV3
+
+config TARGET_SOCFPGA_CHAMELEONV3_270_3
+ bool "Google Chameleon V3 270-3 (Arria 10)"
+ select TARGET_SOCFPGA_CHAMELEONV3
+
config TARGET_SOCFPGA_CYCLONE5_SOCDK
bool "Altera SOCFPGA SoCDK (Cyclone V)"
select TARGET_SOCFPGA_CYCLONE5
@@ -194,6 +206,7 @@ config SYS_BOARD
default "agilex-socdk" if TARGET_SOCFPGA_AGILEX_SOCDK
default "arria5-socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
default "arria10-socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK
+ default "chameleonv3" if TARGET_SOCFPGA_CHAMELEONV3
default "cyclone5-socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
default "dbm-soc1" if TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
default "de0-nano-soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
@@ -219,6 +232,7 @@ config SYS_VENDOR
default "aries" if TARGET_SOCFPGA_ARIES_MCVEVK
default "devboards" if TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
default "ebv" if TARGET_SOCFPGA_EBV_SOCRATES
+ default "google" if TARGET_SOCFPGA_CHAMELEONV3
default "keymile" if TARGET_SOCFPGA_ARRIA5_SECU1
default "softing" if TARGET_SOCFPGA_SOFTING_VINING_FPGA
default "terasic" if TARGET_SOCFPGA_TERASIC_DE0_NANO
@@ -234,6 +248,7 @@ config SYS_CONFIG_NAME
default "socfpga_arria5_secu1" if TARGET_SOCFPGA_ARRIA5_SECU1
default "socfpga_arria5_socdk" if TARGET_SOCFPGA_ARRIA5_SOCDK
default "socfpga_arria10_socdk" if TARGET_SOCFPGA_ARRIA10_SOCDK
+ default "socfpga_chameleonv3" if TARGET_SOCFPGA_CHAMELEONV3
default "socfpga_cyclone5_socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
default "socfpga_dbm_soc1" if TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
default "socfpga_de0_nano_soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
diff --git a/configs/socfpga_chameleonv3_defconfig b/configs/socfpga_chameleonv3_defconfig
new file mode 100644
index 0000000000..815250e589
--- /dev/null
+++ b/configs/socfpga_chameleonv3_defconfig
@@ -0,0 +1,29 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_TARGET_SOCFPGA_CHAMELEONV3_480_2=y
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_chameleonv3_480_2"
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+CONFIG_FIT=y
+CONFIG_SPL_FIT=y
+CONFIG_FS_LOADER=y
+CONFIG_SPL_FS_LOADER=y
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_FPGA=y
+CONFIG_SPL_TEXT_BASE=0xFFE00000
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x4400
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_TIMER=y
+CONFIG_SPL_TIMER=y
+CONFIG_DESIGNWARE_APB_TIMER=y
+CONFIG_MMC_DW=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_DW=y
+CONFIG_MISC=y
+CONFIG_MISC_INIT_R=y
+CONFIG_ATSHA204A=y
diff --git a/include/configs/socfpga_chameleonv3.h b/include/configs/socfpga_chameleonv3.h
new file mode 100644
index 0000000000..2f224dfa4c
--- /dev/null
+++ b/include/configs/socfpga_chameleonv3.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2022 Google LLC
+ */
+#ifndef __SOCFGPA_CHAMELEONV3_H__
+#define __SOCFGPA_CHAMELEONV3_H__
+
+#include <asm/arch/base_addr_a10.h>
+
+#define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024)
+
+/*
+ * U-Boot general configurations
+ */
+
+/* Memory configurations */
+#define PHYS_SDRAM_1_SIZE 0x40000000
+
+/*
+ * Serial / UART configurations
+ */
+#define CONFIG_SYS_NS16550_MEM32
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_addr_r=0x01000000\0" \
+ "fdt_addr_r=0x02000000\0" \
+ "bootargs=cma=256M console=ttyS1,115200 root=/dev/mmcblk0p3 rw rootwait\0" \
+ "distro_bootcmd=bridge enable; run bootcmd_fit\0" \
+ "autoload=no\0" \
+ "bootcmd_tftp=dhcp; " \
+ "tftpboot ${kernel_addr_r} ${target}/zImage; " \
+ "tftpboot ${fdt_addr_r} ${target}/devicetree.dtb; " \
+ "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "bootcmd_fit=load mmc 0:1 ${loadaddr} kernel.itb; bootm\0"
+
+/*
+ * L4 OSC1 Timer 0
+ */
+/* reload value when timer count to zero */
+#define TIMER_LOAD_VAL 0xFFFFFFFF
+
+/* SPL memory allocation configuration, this is for FAT implementation */
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00015000
+
+/* The rest of the configuration is shared */
+#include <configs/socfpga_common.h>
+
+#endif /* __SOCFGPA_CHAMELEONV3_H__ */
--
2.35.1.1094.g7c7d902a7c-goog
next prev parent reply other threads:[~2022-04-01 13:43 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-01 12:43 [PATCH 00/11] Add Chameleon V3 support Paweł Anikiel
2022-04-01 12:43 ` [PATCH 01/11] arm: dts: Add Mercury+ AA1 devicetree Paweł Anikiel
2022-04-11 18:34 ` Simon Glass
2022-04-14 14:07 ` Paweł Anikiel
2022-04-01 12:43 ` [PATCH 02/11] arm: dts: Add Chameleonv3 handoff headers Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-14 13:58 ` Paweł Anikiel
2022-04-01 12:43 ` [PATCH 03/11] arm: dts: Add Chameleonv3 devicetree Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-14 15:57 ` Paweł Anikiel
2022-04-01 12:43 ` [PATCH 04/11] board: Add Chameleonv3 board dir Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-01 12:43 ` Paweł Anikiel [this message]
2022-04-11 18:35 ` [PATCH 05/11] config: Add Chameleonv3 config Simon Glass
2022-04-01 12:43 ` [PATCH 06/11] misc: atsha204a: Increase wake delay by tWHI Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-01 12:43 ` [PATCH 07/11] sysreset: socfpga: Use parent device for reading base address Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-14 13:33 ` Paweł Anikiel
2022-04-01 12:43 ` [PATCH 08/11] socfpga: arria10: Replace delays with busy waiting in cm_full_cfg Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-01 12:43 ` [PATCH 09/11] socfpga: arria10: Improve bitstream loading speed Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-01 12:43 ` [PATCH 10/11] socfpga: arria10: Wait for fifo empty after writing bitstream Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
2022-04-01 12:43 ` [PATCH 11/11] socfpga: arria10: Allow dcache_enable before relocation Paweł Anikiel
2022-04-11 18:35 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220401124325.1810108-6-pan@semihalf.com \
--to=pan@semihalf.com \
--cc=adrian.fiergolski@fastree3d.com \
--cc=andre.przywara@arm.com \
--cc=christianshewitt@gmail.com \
--cc=elly.siew.chin.lim@intel.com \
--cc=festevam@denx.de \
--cc=jagan@amarulasolutions.com \
--cc=marek.behun@nic.cz \
--cc=marex@denx.de \
--cc=michal.simek@xilinx.com \
--cc=mw@semihalf.com \
--cc=narmstrong@baylibre.com \
--cc=paul.liu@linaro.org \
--cc=pbrobinson@gmail.com \
--cc=simon.k.r.goldschmidt@gmail.com \
--cc=sjg@chromium.org \
--cc=tharvey@gateworks.com \
--cc=tien.fong.chee@intel.com \
--cc=u-boot@lists.denx.de \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox