From: Durai Manickam KR <durai.manickamkr@microchip.com>
To: <u-boot@lists.denx.de>
Cc: <durai.manickamkr@microchip.com>
Subject: [PATCHv3 3/3] configs: Add sam9x60_curiosity_mmc_defconfig
Date: Mon, 4 Apr 2022 11:23:20 +0530 [thread overview]
Message-ID: <20220404055320.26362-4-durai.manickamkr@microchip.com> (raw)
In-Reply-To: <20220404055320.26362-1-durai.manickamkr@microchip.com>
Add boot from SDMMC (sdcard) support for sam9x60_curiosity.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
board/atmel/sam9x60_curiosity/MAINTAINERS | 1 +
configs/sam9x60_curiosity_mmc_defconfig | 74 +++++++++++++++++++++++
2 files changed, 75 insertions(+)
create mode 100644 configs/sam9x60_curiosity_mmc_defconfig
diff --git a/board/atmel/sam9x60_curiosity/MAINTAINERS b/board/atmel/sam9x60_curiosity/MAINTAINERS
index 84a3a9f186..3e1dce2980 100644
--- a/board/atmel/sam9x60_curiosity/MAINTAINERS
+++ b/board/atmel/sam9x60_curiosity/MAINTAINERS
@@ -4,3 +4,4 @@ M: Eugen Hristev <eugen.hristev@microchip.com>
S: Maintained
F: board/atmel/sam9x60_curiosity/
F: include/configs/sam9x60_curiosity.h
+F: configs/sam9x60_curiosity_mmc_defconfig
diff --git a/configs/sam9x60_curiosity_mmc_defconfig b/configs/sam9x60_curiosity_mmc_defconfig
new file mode 100644
index 0000000000..06db619270
--- /dev/null
+++ b/configs/sam9x60_curiosity_mmc_defconfig
@@ -0,0 +1,74 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x23f00000
+CONFIG_SYS_MALLOC_LEN=0x81000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_TARGET_SAM9X60_CURIOSITY=y
+CONFIG_ATMEL_LEGACY=y
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_ENV_SIZE=0x4000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sam9x60_curiosity"
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_FIT=y
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="mem=128M console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x21000000 at91-sam9x60_curiosity.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000"
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_MISC_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_HASH_VERIFY=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_CCF=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_GENERIC_CLK=y
+CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_CPU=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MICROCHIP_FLEXCOM=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ATMEL=y
+CONFIG_PHY_MICREL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_TIMER=y
+CONFIG_MCHP_PIT64B_TIMER=y
+CONFIG_OF_LIBFDT_OVERLAY=y
--
2.25.1
next prev parent reply other threads:[~2022-04-04 13:09 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-04 5:53 [PATCHv3 0/3] Add support for sam9x60_curiosity Durai Manickam KR
2022-04-04 5:53 ` [PATCHv3 1/3] board: Add sam9x60_curiosity support Durai Manickam KR
2022-04-04 5:53 ` [PATCHv3 2/3] ARM: dts: Add device tree files for sam9x60_curiosity Durai Manickam KR
2022-04-04 5:53 ` Durai Manickam KR [this message]
2022-04-27 6:00 ` [PATCHv3 0/3] Add support " Eugen.Hristev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220404055320.26362-4-durai.manickamkr@microchip.com \
--to=durai.manickamkr@microchip.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox