From: Elmar Albert <ealbert@data-modul.com>
To: <u-boot@lists.denx.de>
Cc: Elmar Albert <ealbert@data-modul.com>,
Fabio Estevam <festevam@denx.de>, Peng Fan <peng.fan@nxp.com>,
Stefano Babic <sbabic@denx.de>, uboot-imx <uboot-imx@nxp.com>
Subject: [PATCH] clk: imx8mp: Add ECSPI clocks
Date: Wed, 6 Apr 2022 13:39:50 +0200 [thread overview]
Message-ID: <20220406113950.111291-1-ealbert@data-modul.com> (raw)
Add clock tables required for bing up ECSPI interfaces
Signed-off-by: Elmar Albert <ealbert@data-modul.com>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
Signed-off-by: Elmar Albert <ealbert@data-modul.com>
---
drivers/clk/imx/clk-imx8mp.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index ad84ce38ed..8a374ef0b5 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -160,6 +160,18 @@ static const char *imx8mp_gic_sels[] = {"clock-osc-24m", "sys_pll2_200m", "sys_p
"sys_pll2_100m", "sys_pll1_800m",
"sys_pll2_500m", "clk_ext4", "audio_pll2_out" };
+static const char *imx8mp_ecspi1_sels[] = {"clock-osc_24m", "sys_pll2_200m", "sys_pll1_40m",
+ "sys_pll1_160m", "sys_pll1_800m", "sys_pll3_out",
+ "sys_pll2_250m", "audio_pll2_out", };
+
+static const char *imx8mp_ecspi2_sels[] = {"clock-osc_24m", "sys_pll2_200m", "sys_pll1_40m",
+ "sys_pll1_160m", "sys_pll1_800m", "sys_pll3_out",
+ "sys_pll2_250m", "audio_pll2_out", };
+
+static const char *imx8mp_ecspi3_sels[] = {"clock-osc_24m", "sys_pll2_200m", "sys_pll1_40m",
+ "sys_pll1_160m", "sys_pll1_800m", "sys_pll3_out",
+ "sys_pll2_250m", "audio_pll2_out", };
+
static const char *imx8mp_wdog_sels[] = {"clock-osc-24m", "sys_pll1_133m", "sys_pll1_160m",
"vpu_pll_out", "sys_pll2_125m", "sys_pll3_out",
"sys_pll1_80m", "sys_pll2_166m" };
@@ -274,6 +286,9 @@ static int imx8mp_clk_probe(struct udevice *dev)
clk_dm(IMX8MP_CLK_UART3, imx8m_clk_composite("uart3", imx8mp_uart3_sels, base + 0xb000));
clk_dm(IMX8MP_CLK_UART4, imx8m_clk_composite("uart4", imx8mp_uart4_sels, base + 0xb080));
clk_dm(IMX8MP_CLK_GIC, imx8m_clk_composite_critical("gic", imx8mp_gic_sels, base + 0xb200));
+ clk_dm(IMX8MP_CLK_ECSPI1, imx8m_clk_composite("ecspi1", imx8mp_ecspi1_sels, base + 0xb280));
+ clk_dm(IMX8MP_CLK_ECSPI2, imx8m_clk_composite("ecspi2", imx8mp_ecspi2_sels, base + 0xb300));
+ clk_dm(IMX8MP_CLK_ECSPI3, imx8m_clk_composite("ecspi3", imx8mp_ecspi3_sels, base + 0xc180));
clk_dm(IMX8MP_CLK_WDOG, imx8m_clk_composite("wdog", imx8mp_wdog_sels, base + 0xb900));
clk_dm(IMX8MP_CLK_USDHC3, imx8m_clk_composite("usdhc3", imx8mp_usdhc3_sels, base + 0xbc80));
@@ -282,7 +297,9 @@ static int imx8mp_clk_probe(struct udevice *dev)
clk_dm(IMX8MP_CLK_DRAM_CORE, imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mp_dram_core_sels, ARRAY_SIZE(imx8mp_dram_core_sels), CLK_IS_CRITICAL));
clk_dm(IMX8MP_CLK_DRAM1_ROOT, imx_clk_gate4_flags("dram1_root_clk", "dram_core_clk", base + 0x4050, 0, CLK_IS_CRITICAL));
-
+ clk_dm(IMX8MP_CLK_ECSPI1_ROOT, imx_clk_gate4("ecspi1_root_clk", "ecspi1", base + 0x4070, 0));
+ clk_dm(IMX8MP_CLK_ECSPI2_ROOT, imx_clk_gate4("ecspi2_root_clk", "ecspi2", base + 0x4080, 0));
+ clk_dm(IMX8MP_CLK_ECSPI3_ROOT, imx_clk_gate4("ecspi3_root_clk", "ecspi3", base + 0x4090, 0));
clk_dm(IMX8MP_CLK_ENET1_ROOT, imx_clk_gate4("enet1_root_clk", "enet_axi", base + 0x40a0, 0));
clk_dm(IMX8MP_CLK_GPIO1_ROOT, imx_clk_gate4("gpio1_root_clk", "ipg_root", base + 0x40b0, 0));
clk_dm(IMX8MP_CLK_GPIO2_ROOT, imx_clk_gate4("gpio2_root_clk", "ipg_root", base + 0x40c0, 0));
--
2.25.1
next reply other threads:[~2022-04-06 13:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-06 11:39 Elmar Albert [this message]
2022-04-06 18:13 ` [PATCH] clk: imx8mp: Add ECSPI clocks Fabio Estevam
-- strict thread matches above, loose matches on Subject: below --
2022-04-12 21:39 sbabic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220406113950.111291-1-ealbert@data-modul.com \
--to=ealbert@data-modul.com \
--cc=festevam@denx.de \
--cc=peng.fan@nxp.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox