From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Cc: daniel.schwierzeck@gmail.com, awilliams@marvell.com, cchavva@marvell.com
Subject: [PATCH v2 51/52] mips: octeon: ebb7304: Enable ethernet support
Date: Thu, 7 Apr 2022 09:11:53 +0200 [thread overview]
Message-ID: <20220407071154.51997-52-sr@denx.de> (raw)
In-Reply-To: <20220407071154.51997-1-sr@denx.de>
This patch enables the Kconfig symbols needed for full ethernet support
on the EBB7304. Also the PHY autonegotiation timeout is increased, as
the default 5 seconds are sometime a bit short. With this, ethernet can
be used on this board. Here an example of a tftp load:
=> tftp ffffffff81000000 big
ethernet-mac-nexus@11800e0000000 Waiting for PHY auto negotiation to complete....... done
Using ethernet-mac-nexus@11800e0000000 device
TFTP from server 192.168.1.5; our IP address is 192.168.1.243
Filename 'big'.
Load address: 0xffffffff81000000
Loading: ################################################## 10 MiB
13.2 MiB/s
done
Bytes transferred = 10485760 (a00000 hex)
Signed-off-by: Stefan Roese <sr@denx.de>
---
configs/octeon_ebb7304_defconfig | 7 +++++++
include/configs/octeon_ebb7304.h | 2 ++
2 files changed, 9 insertions(+)
diff --git a/configs/octeon_ebb7304_defconfig b/configs/octeon_ebb7304_defconfig
index 9824f8b97ae5..3d9bbaaab4df 100644
--- a/configs/octeon_ebb7304_defconfig
+++ b/configs/octeon_ebb7304_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_PART=y
CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_RTC=y
CONFIG_CMD_TIME=y
@@ -36,6 +37,7 @@ CONFIG_EFI_PARTITION=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0x800000001FBFE000
+CONFIG_TFTP_TSIZE=y
CONFIG_CLK=y
# CONFIG_INPUT is not set
CONFIG_MISC=y
@@ -53,7 +55,12 @@ CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MARVELL=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
CONFIG_E1000=y
+CONFIG_NET_OCTEON=y
CONFIG_PCI=y
CONFIG_PCIE_OCTEON=y
CONFIG_DM_REGULATOR=y
diff --git a/include/configs/octeon_ebb7304.h b/include/configs/octeon_ebb7304.h
index 358db69a05b3..8c6c57bd546a 100644
--- a/include/configs/octeon_ebb7304.h
+++ b/include/configs/octeon_ebb7304.h
@@ -16,4 +16,6 @@
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
+#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
+
#endif /* __CONFIG_H__ */
--
2.35.1
next prev parent reply other threads:[~2022-04-07 7:25 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-07 7:11 [PATCH v2 00/52] mips: octeon: Add ethernet support Stefan Roese
2022-04-07 7:11 ` [PATCH v2 01/52] mips: octeon: Add misc cvmx-* header files Stefan Roese
2022-04-07 7:11 ` [PATCH v2 02/52] mips: octeon: Add cvmx-ilk-defs.h header file Stefan Roese
2022-04-07 7:11 ` [PATCH v2 03/52] mips: octeon: Add cvmx-iob-defs.h " Stefan Roese
2022-04-07 7:11 ` [PATCH v2 04/52] mips: octeon: Add cvmx-lbk-defs.h " Stefan Roese
2022-04-07 7:11 ` [PATCH v2 05/52] mips: octeon: Add cvmx-npei-defs.h " Stefan Roese
2022-04-07 7:11 ` [PATCH v2 06/52] mips: octeon: Add cvmx-pcsxx-defs.h " Stefan Roese
2022-04-07 7:11 ` [PATCH v2 07/52] mips: octeon: Add cvmx-xcv-defs.h " Stefan Roese
2022-04-07 7:11 ` [PATCH v2 08/52] mips: octeon: Misc changes to existing headers for upcoming eth support Stefan Roese
2022-04-07 7:11 ` [PATCH v2 09/52] mips: octeon: Add cvmx-helper-agl.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 10/52] mips: octeon: Add cvmx-helper-bgx.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 11/52] mips: octeon: Add cvmx-helper-board.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 12/52] mips: octeon: Add cvmx-helper-fpa.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 13/52] mips: octeon: Add cvmx-helper-ilk.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 14/52] mips: octeon: Add cvmx-helper-ipd.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 15/52] mips: octeon: Add cvmx-helper-loop.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 16/52] mips: octeon: Add cvmx-helper-npi.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 17/52] mips: octeon: Add cvmx-helper-pki.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 18/52] mips: octeon: Add cvmx-helper-pko.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 19/52] mips: octeon: Add cvmx-helper-pko3.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 20/52] mips: octeon: Add cvmx-helper-rgmii.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 21/52] mips: octeon: Add cvmx-helper-sgmii.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 23/52] mips: octeon: Add cvmx-helper-xaui.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 24/52] mips: octeon: Add cvmx-agl.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 26/52] mips: octeon: Add cvmx-fau-compat.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 27/52] mips: octeon: Add cvmx-fpa.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 30/52] mips: octeon: Add cvmx-ilk.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 33/52] mips: octeon: Add cvmx-pki-resources.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 34/52] mips: octeon: Add cvmx-pko.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 35/52] mips: octeon: Add cvmx-pko3.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 37/52] mips: octeon: Add cvmx-pko3-compat.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 38/52] mips: octeon: Add cvmx-pko3-resources.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 39/52] mips: octeon: Add cvmx-pko-internal-ports-range.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 40/52] mips: octeon: Add cvmx-qlm-tables.c Stefan Roese
2022-04-07 7:11 ` [PATCH v2 42/52] mips: octeon: Misc changes to existing C files for upcoming eth support Stefan Roese
2022-04-07 7:11 ` [PATCH v2 43/52] mips: octeon: Makefile: Enable building of the newly added C files Stefan Roese
2022-04-07 7:11 ` [PATCH v2 44/52] mips: octeon: cpu.c: Move bootmem init to arch_early_init_r() Stefan Roese
2022-04-07 7:11 ` [PATCH v2 45/52] mips: octeon: cpu.c: Implement configure_lmtdma_window() Stefan Roese
2022-04-07 7:11 ` [PATCH v2 46/52] mips: octeon: octeon_common.h: Move init SP because of increased image size Stefan Roese
2022-04-07 7:11 ` [PATCH v2 47/52] mips: octeon: mrvl, cn73xx.dtsi: Add ethernet (BGX) and SMI DT nodes Stefan Roese
2022-04-07 7:11 ` [PATCH v2 48/52] mips: octeon: mrvl, octeon-ebb7304.dts: Add ethernet DT support Stefan Roese
2022-04-07 7:11 ` [PATCH v2 49/52] mips: octeon: mrvl, octeon-nic23.dts: " Stefan Roese
2022-04-07 7:11 ` [PATCH v2 50/52] net: Add ethernet support for MIPS Octeon Stefan Roese
2022-04-07 7:11 ` Stefan Roese [this message]
2022-04-07 7:11 ` [PATCH v2 52/52] mips: octeon: nic23: Enable ethernet support Stefan Roese
2022-05-02 16:00 ` [PATCH v2 00/52] mips: octeon: Add " Stefan Roese
2022-05-02 18:54 ` Daniel Schwierzeck
2022-05-04 9:25 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220407071154.51997-52-sr@denx.de \
--to=sr@denx.de \
--cc=awilliams@marvell.com \
--cc=cchavva@marvell.com \
--cc=daniel.schwierzeck@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox