From: Johan Jonker <jbx6244@gmail.com>
To: kever.yang@rock-chips.com
Cc: sjg@chromium.org, philipp.tomsich@vrull.eu, lukma@denx.de,
seanga2@gmail.com, u-boot@lists.denx.de
Subject: [PATCH v10 06/16] arm: dts: rockchip: fix rk3xxx-u-boot.dtsi
Date: Mon, 11 Apr 2022 03:29:36 +0200 [thread overview]
Message-ID: <20220411012946.14099-7-jbx6244@gmail.com> (raw)
In-Reply-To: <20220411012946.14099-1-jbx6244@gmail.com>
The file rk3xxx-u-boot.dtsi was original only for rk3188 and SPL.
With rk3066 added some nodes are also needed in TPL,
so change them to u-boot,dm-pre-reloc
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---
arch/arm/dts/rk3xxx-u-boot.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/rk3xxx-u-boot.dtsi b/arch/arm/dts/rk3xxx-u-boot.dtsi
index 581594c35d..e67432fb39 100644
--- a/arch/arm/dts/rk3xxx-u-boot.dtsi
+++ b/arch/arm/dts/rk3xxx-u-boot.dtsi
@@ -4,7 +4,7 @@
noc: syscon@10128000 {
compatible = "rockchip,rk3188-noc", "syscon";
reg = <0x10128000 0x2000>;
- u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
};
dmc: dmc@20020000 {
@@ -18,16 +18,16 @@
rockchip,grf = <&grf>;
rockchip,pmu = <&pmu>;
rockchip,noc = <&noc>;
- u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
};
};
&grf {
- u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
};
&pmu {
- u-boot,dm-spl;
+ u-boot,dm-pre-reloc;
};
&uart2 {
--
2.20.1
next prev parent reply other threads:[~2022-04-11 1:31 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-11 1:29 [PATCH v10 00/16] Add Rikomagic MK808 board Johan Jonker
2022-04-11 1:29 ` [PATCH v10 01/16] rockchip: rk3066-power: sync power domain dt-binding header from Linux Johan Jonker
2022-04-11 1:29 ` [PATCH v10 02/16] rockchip: rk3066: add grf header file Johan Jonker
2022-04-11 1:29 ` [PATCH v10 03/16] rockchip: rk3066: add clock driver for rk3066 soc Johan Jonker
2022-04-11 1:29 ` [PATCH v10 04/16] rockchip: rk3066: add rk3066 pinctrl driver Johan Jonker
2022-04-11 1:29 ` [PATCH v10 05/16] rockchip: rk3066: add sdram driver Johan Jonker
2022-04-11 1:29 ` Johan Jonker [this message]
2022-04-11 1:29 ` [PATCH v10 07/16] arm: dts: rockchip: fix include rk3xxx-u-boot.dtsi Johan Jonker
2022-04-11 1:29 ` [PATCH v10 08/16] arm: dts: rockchip: add rk3066a.dtsi Johan Jonker
2022-04-11 1:29 ` [PATCH v10 09/16] arm: dts: rockchip: add rk3066a-mk808.dts Johan Jonker
2022-04-11 1:29 ` [PATCH v10 10/16] rockchip: tools: add rk3066 support to rkcommon.c Johan Jonker
2022-04-11 1:29 ` [PATCH v10 11/16] rockchip: rk3066: add core support Johan Jonker
2022-04-15 0:20 ` Kever Yang
2022-04-16 5:44 ` Kever Yang
2022-04-11 1:29 ` [PATCH v10 12/16] rockchip: rk3066: add Rikomagic MK808 board Johan Jonker
2022-04-11 1:29 ` [PATCH v10 13/16] rockchip: rk3066: add mk808_defconfig Johan Jonker
2022-04-11 1:29 ` [PATCH v10 14/16] doc: rockchip: restyle rockchip.rst Johan Jonker
2022-04-15 0:21 ` Kever Yang
2022-04-11 1:29 ` [PATCH v10 15/16] doc: rockchip: add px30/rk3326 boards and examples Johan Jonker
2022-04-15 0:21 ` Kever Yang
2022-04-11 1:29 ` [PATCH v10 16/16] doc: rockchip: add rk3066 Rikomagic MK808 Johan Jonker
2022-04-15 0:21 ` Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220411012946.14099-7-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=kever.yang@rock-chips.com \
--cc=lukma@denx.de \
--cc=philipp.tomsich@vrull.eu \
--cc=seanga2@gmail.com \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox