[PATCH v2 2/2] board: gateworks: venice: add imx8mp-venice-gw740x support

sbabic
2022-04-21T12:31:22Z

> The GW74xx is based on the i.MX 8M Plus SoC featuring:
> - LPDDR4 DRAM
> - eMMC FLASH
> - Gateworks System Controller
> - PCIe Gen 3.0 switch (build option)
> - USB 3.0 HUB
> - USB Type-C front panel connector
> - GPS
> - 3-axis accelerometer
> - CAN bus
> - 6x GbE RJ45 front-panel jacks
> - 1x IMX8M FEC RGMII GbE (with Passive PoE)
> - 5x IMX8M EQOS RGMII 6 port GbE Switch
> (1x with 802.3af class 5 Active PoE)
> - RS232/RS485/RS422 serial transceiver
> - MIPI header (DSI/CSI/GPIO/PWM/I2S)
> - DigI/O header (UART/GPIO/I2C/ADC)
> - 802.11ac WiFi
> - Bluetooth BLE
> - 3x MiniPCIe sockets with PCI/USB
> - 1x M.2 Socket with USB2.0, PCIe, and dual-SIM
> - PMIC
> - Wide range DC input supply (8V to 60V DC)
> Do the following to add support for this and future imx8mp-venice boards:
> - add dts
> - add DRAM config
> - add PMIC config
> - add IMX8MP support in spl.c and venice.c
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================