From: AKASHI Takahiro <takahiro.akashi@linaro.org>
To: Heinrich Schuchardt <xypron.glpk@gmx.de>,
sjg@chromium.org, masami.hiramatsu@linaro.org,
u-boot@lists.denx.de, lukma@denx.de, peng.fan@nxp.com,
jh80.chung@samsung.com, bmeng.cn@gmail.com, sr@denx.de,
ilias.apalodimas@linaro.org
Subject: Re: [PATCH v3 11/19] dm: disk: add UCLASS_PARTITION
Date: Thu, 14 Apr 2022 15:17:38 +0900 [thread overview]
Message-ID: <20220414061738.GC32435@laputa> (raw)
In-Reply-To: <20220413031600.GA74827@laputa>
On Wed, Apr 13, 2022 at 12:16:00PM +0900, AKASHI Takahiro wrote:
> Heinrich,
> (and Simon)
>
> On Sat, Apr 09, 2022 at 09:05:07PM +0200, Heinrich Schuchardt wrote:
> > On 3/8/22 12:36, AKASHI Takahiro wrote:
> > > With this new function, UCLASS_PARTITION devices will be created as
> > > child nodes of UCLASS_BLK device.
> > >
> > > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> > > ---
> > > disk/Makefile | 3 +
> > > disk/disk-uclass.c | 153 +++++++++++++++++++++++++++++++++++++++++
> > > include/dm/uclass-id.h | 1 +
> > > include/part.h | 11 +++
> > > 4 files changed, 168 insertions(+)
> > > create mode 100644 disk/disk-uclass.c
> > >
> > > diff --git a/disk/Makefile b/disk/Makefile
> > > index 6ce5a687b36c..ec37b74f5f40 100644
> > > --- a/disk/Makefile
> > > +++ b/disk/Makefile
> > > @@ -6,6 +6,9 @@
> > > #ccflags-y += -DET_DEBUG -DDEBUG
> > >
> > > obj-$(CONFIG_PARTITIONS) += part.o
> > > +ifdef CONFIG_$(SPL_)BLK
> > > +obj-$(CONFIG_PARTITIONS) += disk-uclass.o
> >
> > phycore-rk3288_defconfig has CONFIG_SPL_LIBDISK_SUPPORT=n ("Support disk
> > partitions").
>
> I think that SPL_LIBDISK_SUPPORT no longer make any sense and is obsolete.
>
> > But spl/disk/disk-uclass is built.
>
> Right, but what is strange is:
> - SPL_PARTITION is enabled by "default y if PARTITONS", while
> - none of any particular partition types is enabled for spl
> due to *explicit* disablement of
> # CONFIG_SPL_DOS_PARTITION is not set
> # CONFIG_SPL_EFI_PARTITION is not set
> in phycore-rk3288_defconfig.
>
> I think that disk/Kconfig should be revised.
I still believe so, but we can also fix the issue specifically on rk3288
by adding
# CONFIG_SPL_PARTITIONS is not set
# CONFIG_TPL_PARTITIONS is not set
to phycore-rk3288_defconfig.
Are you satisfied with this solution?
-Takahiro Akashi
> -Takahiro Akashi
>
> > This leads to an unnecessary size increase of the SPL image.
> > With this size increase building fails.
> >
> > Best regards
> >
> > Heinrich
> >
> > > +endif
> > > obj-$(CONFIG_$(SPL_)MAC_PARTITION) += part_mac.o
> > > obj-$(CONFIG_$(SPL_)DOS_PARTITION) += part_dos.o
> > > obj-$(CONFIG_$(SPL_)ISO_PARTITION) += part_iso.o
> > > diff --git a/disk/disk-uclass.c b/disk/disk-uclass.c
> > > new file mode 100644
> > > index 000000000000..4918a2f72d1e
> > > --- /dev/null
> > > +++ b/disk/disk-uclass.c
> > > @@ -0,0 +1,153 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +/*
> > > + * Software partition device (UCLASS_PARTITION)
> > > + *
> > > + * Copyright (c) 2021 Linaro Limited
> > > + * Author: AKASHI Takahiro
> > > + */
> > > +
> > > +#define LOG_CATEGORY UCLASS_PARTITION
> > > +
> > > +#include <blk.h>
> > > +#include <dm.h>
> > > +#include <log.h>
> > > +#include <part.h>
> > > +#include <vsprintf.h>
> > > +#include <dm/device-internal.h>
> > > +#include <dm/lists.h>
> > > +
> > > +int part_create_block_devices(struct udevice *blk_dev)
> > > +{
> > > + int part, count;
> > > + struct blk_desc *desc = dev_get_uclass_plat(blk_dev);
> > > + struct disk_partition info;
> > > + struct disk_part *part_data;
> > > + char devname[32];
> > > + struct udevice *dev;
> > > + int ret;
> > > +
> > > + if (!CONFIG_IS_ENABLED(PARTITIONS) ||
> > > + !CONFIG_IS_ENABLED(HAVE_BLOCK_DEVICE))
> > > + return 0;
> > > +
> > > + if (device_get_uclass_id(blk_dev) != UCLASS_BLK)
> > > + return 0;
> > > +
> > > + /* Add devices for each partition */
> > > + for (count = 0, part = 1; part <= MAX_SEARCH_PARTITIONS; part++) {
> > > + if (part_get_info(desc, part, &info))
> > > + continue;
> > > + snprintf(devname, sizeof(devname), "%s:%d", blk_dev->name,
> > > + part);
> > > +
> > > + ret = device_bind_driver(blk_dev, "blk_partition",
> > > + strdup(devname), &dev);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + part_data = dev_get_uclass_plat(dev);
> > > + part_data->partnum = part;
> > > + part_data->gpt_part_info = info;
> > > + count++;
> > > +
> > > + ret = device_probe(dev);
> > > + if (ret) {
> > > + debug("Can't probe\n");
> > > + count--;
> > > + device_unbind(dev);
> > > +
> > > + continue;
> > > + }
> > > + }
> > > + debug("%s: %d partitions found in %s\n", __func__, count,
> > > + blk_dev->name);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static ulong blk_part_read(struct udevice *dev, lbaint_t start,
> > > + lbaint_t blkcnt, void *buffer)
> > > +{
> > > + struct udevice *parent;
> > > + struct disk_part *part;
> > > + const struct blk_ops *ops;
> > > +
> > > + parent = dev_get_parent(dev);
> > > + ops = blk_get_ops(parent);
> > > + if (!ops->read)
> > > + return -ENOSYS;
> > > +
> > > + part = dev_get_uclass_plat(dev);
> > > + if (start >= part->gpt_part_info.size)
> > > + return 0;
> > > +
> > > + if ((start + blkcnt) > part->gpt_part_info.size)
> > > + blkcnt = part->gpt_part_info.size - start;
> > > + start += part->gpt_part_info.start;
> > > +
> > > + return ops->read(parent, start, blkcnt, buffer);
> > > +}
> > > +
> > > +static ulong blk_part_write(struct udevice *dev, lbaint_t start,
> > > + lbaint_t blkcnt, const void *buffer)
> > > +{
> > > + struct udevice *parent;
> > > + struct disk_part *part;
> > > + const struct blk_ops *ops;
> > > +
> > > + parent = dev_get_parent(dev);
> > > + ops = blk_get_ops(parent);
> > > + if (!ops->write)
> > > + return -ENOSYS;
> > > +
> > > + part = dev_get_uclass_plat(dev);
> > > + if (start >= part->gpt_part_info.size)
> > > + return 0;
> > > +
> > > + if ((start + blkcnt) > part->gpt_part_info.size)
> > > + blkcnt = part->gpt_part_info.size - start;
> > > + start += part->gpt_part_info.start;
> > > +
> > > + return ops->write(parent, start, blkcnt, buffer);
> > > +}
> > > +
> > > +static ulong blk_part_erase(struct udevice *dev, lbaint_t start,
> > > + lbaint_t blkcnt)
> > > +{
> > > + struct udevice *parent;
> > > + struct disk_part *part;
> > > + const struct blk_ops *ops;
> > > +
> > > + parent = dev_get_parent(dev);
> > > + ops = blk_get_ops(parent);
> > > + if (!ops->erase)
> > > + return -ENOSYS;
> > > +
> > > + part = dev_get_uclass_plat(dev);
> > > + if (start >= part->gpt_part_info.size)
> > > + return 0;
> > > +
> > > + if ((start + blkcnt) > part->gpt_part_info.size)
> > > + blkcnt = part->gpt_part_info.size - start;
> > > + start += part->gpt_part_info.start;
> > > +
> > > + return ops->erase(parent, start, blkcnt);
> > > +}
> > > +
> > > +static const struct blk_ops blk_part_ops = {
> > > + .read = blk_part_read,
> > > + .write = blk_part_write,
> > > + .erase = blk_part_erase,
> > > +};
> > > +
> > > +U_BOOT_DRIVER(blk_partition) = {
> > > + .name = "blk_partition",
> > > + .id = UCLASS_PARTITION,
> > > + .ops = &blk_part_ops,
> > > +};
> > > +
> > > +UCLASS_DRIVER(partition) = {
> > > + .id = UCLASS_PARTITION,
> > > + .per_device_plat_auto = sizeof(struct disk_part),
> > > + .name = "partition",
> > > +};
> > > diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
> > > index 0e26e1d13824..230b1ea528cf 100644
> > > --- a/include/dm/uclass-id.h
> > > +++ b/include/dm/uclass-id.h
> > > @@ -83,6 +83,7 @@ enum uclass_id {
> > > UCLASS_P2SB, /* (x86) Primary-to-Sideband Bus */
> > > UCLASS_PANEL, /* Display panel, such as an LCD */
> > > UCLASS_PANEL_BACKLIGHT, /* Backlight controller for panel */
> > > + UCLASS_PARTITION, /* Logical disk partition device */
> > > UCLASS_PCH, /* x86 platform controller hub */
> > > UCLASS_PCI, /* PCI bus */
> > > UCLASS_PCI_EP, /* PCI endpoint device */
> > > diff --git a/include/part.h b/include/part.h
> > > index 53cfbdd87671..95e30e60af10 100644
> > > --- a/include/part.h
> > > +++ b/include/part.h
> > > @@ -253,6 +253,17 @@ void part_set_generic_name(const struct blk_desc *dev_desc,
> > > int part_num, char *name);
> > >
> > > extern const struct block_drvr block_drvr[];
> > > +
> > > +struct udevice;
> > > +/**
> > > + * part_create_block_devices - Create block devices for disk partitions
> > > + *
> > > + * Create UCLASS_PARTITION udevices for each of disk partitions in @parent
> > > + *
> > > + * @blk_dev: Whole disk device
> > > + */
> > > +int part_create_block_devices(struct udevice *blk_dev);
> > > +
> > > #else
> > > static inline struct blk_desc *blk_get_dev(const char *ifname, int dev)
> > > { return NULL; }
> >
next prev parent reply other threads:[~2022-04-14 6:17 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-08 11:36 [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 01/19] scsi: call device_probe() after scanning AKASHI Takahiro
2022-03-08 13:30 ` Heinrich Schuchardt
2022-03-08 11:36 ` [PATCH v3 02/19] usb: storage: " AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 03/19] mmc: " AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 04/19] nvme: " AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 05/19] sata: " AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 06/19] block: ide: " AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 07/19] virtio: call device_probe() in scanning AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 09/19] dm: tag: add some document AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 10/19] test: dm: add tests for tag support AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 11/19] dm: disk: add UCLASS_PARTITION AKASHI Takahiro
2022-04-09 19:05 ` Heinrich Schuchardt
2022-04-13 3:16 ` AKASHI Takahiro
2022-04-14 6:17 ` AKASHI Takahiro [this message]
2022-04-14 7:13 ` Heinrich Schuchardt
2022-03-08 11:36 ` [PATCH v3 12/19] dm: blk: add a device-probe hook for scanning disk partitions AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 14/19] efi_loader: disk: a helper function to create efi_disk objects from udevice AKASHI Takahiro
2022-04-09 11:16 ` Heinrich Schuchardt
2022-04-11 9:06 ` AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 15/19] efi_loader: disk: a helper function to delete efi_disk objects AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 16/19] dm: disk: add read/write interfaces with udevice AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 17/19] efi_loader: disk: use udevice instead of blk_desc AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 18/19] efi_loader: disk: not create BLK device for BLK(IF_TYPE_EFI_LOADER) devices AKASHI Takahiro
2022-03-08 11:36 ` [PATCH v3 19/19] efi_driver: align with efi_disk-dm integration AKASHI Takahiro
2022-03-08 12:59 ` [PATCH v3 00/19] efi_loader: more tightly integrate UEFI disks to driver model Heinrich Schuchardt
2022-03-08 13:04 ` AKASHI Takahiro
2022-03-08 13:24 ` Heinrich Schuchardt
2022-03-08 16:20 ` Simon Glass
2022-03-08 16:49 ` Heinrich Schuchardt
2022-03-08 16:56 ` Simon Glass
2022-03-08 17:21 ` Heinrich Schuchardt
2022-03-08 17:37 ` Simon Glass
2022-03-08 19:15 ` Soeren Moch
2022-03-08 21:20 ` Simon Glass
2022-03-09 0:13 ` Tom Rini
2022-03-09 2:32 ` Simon Glass
2022-03-09 3:00 ` Tom Rini
2022-03-09 3:10 ` Simon Glass
2022-03-09 3:11 ` Simon Glass
2022-03-09 14:25 ` Tom Rini
2022-03-09 15:33 ` Simon Glass
2022-03-11 18:26 ` Simon Glass
2022-03-11 22:43 ` Soeren Moch
2022-03-12 5:02 ` Simon Glass
2022-03-14 8:27 ` Soeren Moch
2022-03-14 12:57 ` Tom Rini
2022-03-14 17:08 ` Simon Glass
2022-03-14 19:12 ` Soeren Moch
2022-03-14 19:21 ` Simon Glass
2022-03-09 7:16 ` Mark Kettenis
2022-03-09 2:10 ` AKASHI Takahiro
2022-03-09 2:34 ` Simon Glass
2022-03-09 2:48 ` AKASHI Takahiro
2022-03-09 3:10 ` Simon Glass
2022-03-09 5:07 ` AKASHI Takahiro
2022-03-09 11:52 ` Heinrich Schuchardt
[not found] ` <20220308113657.221101-9-takahiro.akashi@linaro.org>
2022-03-09 11:41 ` [PATCH v3 08/19] dm: add tag support Ilias Apalodimas
2022-03-10 0:02 ` AKASHI Takahiro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220414061738.GC32435@laputa \
--to=takahiro.akashi@linaro.org \
--cc=bmeng.cn@gmail.com \
--cc=ilias.apalodimas@linaro.org \
--cc=jh80.chung@samsung.com \
--cc=lukma@denx.de \
--cc=masami.hiramatsu@linaro.org \
--cc=peng.fan@nxp.com \
--cc=sjg@chromium.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox