[PATCH v2 2/2] board: gateworks: venice: add imx8mp-venice-gw740x support

[sbabic@denx.de]

> The GW74xx is based on the i.MX 8M Plus SoC featuring:
>  - LPDDR4 DRAM
>  - eMMC FLASH
>  - Gateworks System Controller
>  - PCIe Gen 3.0 switch (build option)
>  - USB 3.0 HUB
>  - USB Type-C front panel connector
>  - GPS
>  - 3-axis accelerometer
>  - CAN bus
>  - 6x GbE RJ45 front-panel jacks
>   - 1x IMX8M FEC RGMII GbE (with Passive PoE)
>   - 5x IMX8M EQOS RGMII 6 port GbE Switch
>     (1x with 802.3af class 5 Active PoE)
>  - RS232/RS485/RS422 serial transceiver
>  - MIPI header (DSI/CSI/GPIO/PWM/I2S)
>  - DigI/O header (UART/GPIO/I2C/ADC)
>  - 802.11ac WiFi
>  - Bluetooth BLE
>  - 3x MiniPCIe sockets with PCI/USB
>  - 1x M.2 Socket with USB2.0, PCIe, and dual-SIM
>  - PMIC
>  - Wide range DC input supply (8V to 60V DC)
> Do the following to add support for this and future imx8mp-venice boards:
>  - add dts
>  - add DRAM config
>  - add PMIC config
>  - add IMX8MP support in spl.c and venice.c
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================