From: Fabio Estevam <festevam@gmail.com>
To: sbabic@denx.de
Cc: peng.fan@nxp.com, u-boot@lists.denx.de, Fabio Estevam <festevam@denx.de>
Subject: [PATCH 1/2] mx6slevk: Remove duplicated "mmc dev" command
Date: Fri, 22 Apr 2022 14:17:56 -0300 [thread overview]
Message-ID: <20220422171757.1719093-1-festevam@gmail.com> (raw)
From: Fabio Estevam <festevam@denx.de>
The "mmc dev ${mmcdev}" command is done twice.
Remove one ocurrence to avoid the duplication.
Signed-off-by: Fabio Estevam <festevam@denx.de>
---
configs/mx6slevk_defconfig | 2 +-
configs/mx6slevk_spinor_defconfig | 2 +-
configs/mx6slevk_spl_defconfig | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig
index 12789c934c0f..79057f7f4c14 100644
--- a/configs/mx6slevk_defconfig
+++ b/configs/mx6slevk_defconfig
@@ -12,7 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk"
# CONFIG_CMD_BMODE is not set
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig
index 2bfeac35877d..2f9026287fc6 100644
--- a/configs/mx6slevk_spinor_defconfig
+++ b/configs/mx6slevk_spinor_defconfig
@@ -14,7 +14,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk"
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_SPI_BOOT=y
CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
diff --git a/configs/mx6slevk_spl_defconfig b/configs/mx6slevk_spl_defconfig
index 09d71ae905f7..5a43a5501cea 100644
--- a/configs/mx6slevk_spl_defconfig
+++ b/configs/mx6slevk_spl_defconfig
@@ -23,7 +23,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
# CONFIG_CMD_BMODE is not set
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C=y
--
2.25.1
next reply other threads:[~2022-04-22 17:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-22 17:17 Fabio Estevam [this message]
2022-04-22 17:17 ` [PATCH 2/2] mx6sllevk: Remove duplicated "mmc dev" command Fabio Estevam
2022-05-20 13:41 ` sbabic
2022-05-20 13:42 ` [PATCH 1/2] mx6slevk: " sbabic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220422171757.1719093-1-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=festevam@denx.de \
--cc=peng.fan@nxp.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox