From: Michael Trimarchi <michael@amarulasolutions.com>
To: Han Xu <han.xu@nxp.com>, U-Boot-Denx <u-boot@lists.denx.de>
Cc: Ye Li <ye.li@nxp.com>, Stefano Babic <sbabic@denx.de>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Fabio Estevam <festevam@denx.de>,
Dario Binacchi <dario.binacchi@amarulasolutions.com>,
Sean Anderson <sean.anderson@seco.com>,
linux-kernel@amarulasolutions.com,
Jagan Teki <jagan@amarulasolutions.com>,
Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Subject: [PATCH V2 0/4] MXS nand fixes in SPL
Date: Wed, 27 Apr 2022 07:50:21 +0200 [thread overview]
Message-ID: <20220427055025.231586-1-michael@amarulasolutions.com> (raw)
Those patches come after some testing of failing in factory on some
unit. We found out that the bootrom imx loader was not able to handling
badblock. This can be a limit of the implementation right now in imx8mn.
Anyway not all the imx platform has the support of this loader. I found
some problems on the implementation so I have fixed it up according the
experience of Sitara. I tested only using a Fit Image as a flash
container. This version add in the series the fix of cmd_nandbcb and
the fix of spl_nand load. I can imagine that a lot of boards and users
are affected. I have started to backport this changes in some older
uboot and adapt it
Michael Trimarchi (4):
nand: raw: mxs_nand: Fix specific hook registration
mtd: nand: mxs_nand_spl: Fix bad block skipping
arm: mach-imx: cmd_nandbcb fix bad block handling
spl: spl_nand: Fix bad block handling in fitImage
arch/arm/mach-imx/cmd_nandbcb.c | 21 +++----
common/spl/spl_nand.c | 5 +-
drivers/mtd/nand/raw/mxs_nand.c | 32 +++++-----
drivers/mtd/nand/raw/mxs_nand_spl.c | 90 ++++++++++++++++-------------
4 files changed, 73 insertions(+), 75 deletions(-)
--
2.25.1
next reply other threads:[~2022-04-27 5:50 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-27 5:50 Michael Trimarchi [this message]
2022-04-27 5:50 ` [PATCH V2 1/4] nand: raw: mxs_nand: Fix specific hook registration Michael Trimarchi
2022-05-06 14:40 ` Han Xu
2022-04-27 5:50 ` [PATCH V2 2/4] mtd: nand: mxs_nand_spl: Fix bad block skipping Michael Trimarchi
2022-04-28 0:27 ` Han Xu
2022-04-28 5:01 ` Michael Nazzareno Trimarchi
2022-05-01 6:36 ` Michael Nazzareno Trimarchi
2022-05-02 21:32 ` Han Xu
2022-05-03 5:14 ` Michael Nazzareno Trimarchi
2022-05-06 8:21 ` Michael Nazzareno Trimarchi
2022-05-06 14:41 ` Han Xu
2022-05-06 14:44 ` Michael Nazzareno Trimarchi
2022-04-27 5:50 ` [PATCH V2 3/4] arm: mach-imx: cmd_nandbcb fix bad block handling Michael Trimarchi
2022-05-06 14:41 ` Han Xu
2022-05-11 6:49 ` Michael Nazzareno Trimarchi
2022-05-11 15:17 ` Tim Harvey
2022-04-27 5:50 ` [PATCH 4/4] spl: spl_nand: Fix bad block handling in fitImage Michael Trimarchi
2022-04-28 12:45 ` Tom Rini
2022-05-06 14:42 ` Han Xu
2022-05-11 15:16 ` [PATCH V2 0/4] MXS nand fixes in SPL Tim Harvey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220427055025.231586-1-michael@amarulasolutions.com \
--to=michael@amarulasolutions.com \
--cc=ariel.dalessandro@collabora.com \
--cc=dario.binacchi@amarulasolutions.com \
--cc=festevam@denx.de \
--cc=han.xu@nxp.com \
--cc=jagan@amarulasolutions.com \
--cc=linux-kernel@amarulasolutions.com \
--cc=miquel.raynal@bootlin.com \
--cc=sbabic@denx.de \
--cc=sean.anderson@seco.com \
--cc=u-boot@lists.denx.de \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox