From: Josua Mayer <josua@solid-run.com>
To: u-boot@lists.denx.de
Cc: alvaro.karsz@solid-run.com, Josua Mayer <josua@solid-run.com>,
Joe Hershberger <joe.hershberger@ni.com>,
Ramon Fried <rfried.dev@gmail.com>,
Nate Drude <nate.d@variscite.com>
Subject: [PATCH 1/5] phy: adin: remove broken support for adi, phy-mode-override
Date: Sun, 1 May 2022 15:41:27 +0300 [thread overview]
Message-ID: <20220501124131.30614-2-josua@solid-run.com> (raw)
In-Reply-To: <20220501124131.30614-1-josua@solid-run.com>
The adin_get_phy_mode_override function does not compile, because it is
missing both declaration and implementation of
phy_get_interface_by_name.
Remove the whole function for now, since the missing implementation is
not included in mainline Linux - and thus can not be copied.
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
drivers/net/phy/adin.c | 34 ----------------------------------
1 file changed, 34 deletions(-)
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index cff841ab3d..2433e76fea 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -94,35 +94,6 @@ static u32 adin_get_reg_value(struct phy_device *phydev,
return rc;
}
-/**
- * adin_get_phy_mode_override - Get phy-mode override for adin PHY
- *
- * The function gets phy-mode string from property 'adi,phy-mode-override'
- * and return its index in phy_interface_strings table, or -1 in error case.
- */
-int adin_get_phy_mode_override(struct phy_device *phydev)
-{
- ofnode node = phy_get_ofnode(phydev);
- const char *phy_mode_override;
- const char *prop_phy_mode_override = "adi,phy-mode-override";
- int override_interface;
-
- phy_mode_override = ofnode_read_string(node, prop_phy_mode_override);
- if (!phy_mode_override)
- return -ENODEV;
-
- debug("%s: %s = '%s'\n",
- __func__, prop_phy_mode_override, phy_mode_override);
-
- override_interface = phy_get_interface_by_name(phy_mode_override);
-
- if (override_interface < 0)
- printf("%s: %s = '%s' is not valid\n",
- __func__, prop_phy_mode_override, phy_mode_override);
-
- return override_interface;
-}
-
static u16 adin_ext_read(struct phy_device *phydev, const u32 regnum)
{
u16 val;
@@ -148,11 +119,6 @@ static int adin_config_rgmii_mode(struct phy_device *phydev)
{
u16 reg_val;
u32 val;
- int phy_mode_override = adin_get_phy_mode_override(phydev);
-
- if (phy_mode_override >= 0) {
- phydev->interface = (phy_interface_t) phy_mode_override;
- }
reg_val = adin_ext_read(phydev, ADIN1300_GE_RGMII_CFG);
--
2.34.1
next prev parent reply other threads:[~2022-05-01 12:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-01 12:41 [PATCH 0/5] mx6cuboxi: add eth support for SoMs revision 1.9+ Josua Mayer
2022-05-01 12:41 ` Josua Mayer [this message]
2022-05-02 13:25 ` [PATCH 1/5] phy: adin: remove broken support for adi,phy-mode-override Nate Drude
2022-05-04 8:51 ` Josua Mayer
2022-05-04 12:46 ` Nate Drude
2022-05-05 15:30 ` Josua Mayer
2022-05-08 9:34 ` Josua Mayer
2022-05-01 12:41 ` [PATCH 2/5] phy: adin: add support for clock output Josua Mayer
2022-05-01 12:41 ` [PATCH 3/5] ARM: dts: imx6qdl-sr-som: add support for alternate phy addresses Josua Mayer
2022-05-01 12:41 ` [PATCH 4/5] mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS Josua Mayer
2022-05-01 12:41 ` [PATCH 5/5] mx6cuboxi: enable driver for adin1300 phy Josua Mayer
2022-05-19 8:59 ` [PATCH 0/5] mx6cuboxi: add eth support for SoMs revision 1.9+ Josua Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220501124131.30614-2-josua@solid-run.com \
--to=josua@solid-run.com \
--cc=alvaro.karsz@solid-run.com \
--cc=joe.hershberger@ni.com \
--cc=nate.d@variscite.com \
--cc=rfried.dev@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox