From: "Pali Rohár" <pali@kernel.org>
To: Priyanka Jain <priyanka.jain@nxp.com>
Cc: u-boot@lists.denx.de
Subject: [PATCH] mtd: rawnand: fsl_elbc: Fix DM support in DTS code path
Date: Mon, 2 May 2022 18:28:08 +0200 [thread overview]
Message-ID: <20220502162808.10550-1-pali@kernel.org> (raw)
For proper DM support it is required to fill also mtd->dev member.
Otherwise DM would not see nand device at all.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
drivers/mtd/nand/raw/fsl_elbc_nand.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index e734139b5ea5..b0e3eb607ed4 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -668,7 +668,7 @@ static void fsl_elbc_ctrl_init(void)
elbc_ctrl->addr = NULL;
}
-static int fsl_elbc_chip_init(int devnum, u8 *addr, ofnode flash_node)
+static int fsl_elbc_chip_init(int devnum, u8 *addr, struct udevice *dev)
{
struct mtd_info *mtd;
struct nand_chip *nand;
@@ -716,7 +716,8 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr, ofnode flash_node)
elbc_ctrl->chips[priv->bank] = priv;
/* fill in nand_chip structure */
- nand->flash_node = flash_node;
+ mtd->dev = dev;
+ nand->flash_node = dev ? dev_ofnode(dev) : ofnode_null();
/* set up function call table */
nand->read_byte = fsl_elbc_read_byte;
@@ -827,14 +828,14 @@ void board_nand_init(void)
int i;
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- fsl_elbc_chip_init(i, (u8 *)base_address[i], ofnode_null());
+ fsl_elbc_chip_init(i, (u8 *)base_address[i], NULL);
}
#else
static int fsl_elbc_nand_probe(struct udevice *dev)
{
- return fsl_elbc_chip_init(0, (void *)dev_read_addr(dev), dev_ofnode(dev));
+ return fsl_elbc_chip_init(0, (void *)dev_read_addr(dev), dev);
}
static const struct udevice_id fsl_elbc_nand_dt_ids[] = {
--
2.20.1
reply other threads:[~2022-05-02 16:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220502162808.10550-1-pali@kernel.org \
--to=pali@kernel.org \
--cc=priyanka.jain@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox