From: "Pali Rohár" <pali@kernel.org>
To: Stefan Roese <sr@denx.de>, Marek Behun <marek.behun@nic.cz>
Cc: u-boot@lists.denx.de
Subject: [PATCH 3/5] serial: Add new config option SPL_DEBUG_UART_BASE
Date: Fri, 6 May 2022 11:05:15 +0200 [thread overview]
Message-ID: <20220506090517.5935-4-pali@kernel.org> (raw)
In-Reply-To: <20220506090517.5935-1-pali@kernel.org>
SPL_DEBUG_UART_BASE is same as DEBUG_UART_BASE, but applies only for SPL.
In some cases base address of UART is different in SPL and proper U-Boot.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
drivers/serial/Kconfig | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 26fa498bbbb7..46726d76b162 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -508,6 +508,13 @@ config DEBUG_UART_BASE
A default should be provided by your board, but if not you will need
to use the correct value here.
+config SPL_DEBUG_UART_BASE
+ hex "Base address of UART for SPL"
+ depends on SPL && DEBUG_UART
+ default DEBUG_UART_BASE
+ help
+ This is the base address of your UART for memory-mapped UARTs for SPL.
+
config DEBUG_UART_CLOCK
int "UART input clock"
depends on DEBUG_UART
--
2.20.1
next prev parent reply other threads:[~2022-05-06 9:06 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-06 9:05 [PATCH 0/5] arm: mvebu: turris_omnia: Fix hangup in debug UART Pali Rohár
2022-05-06 9:05 ` [PATCH 1/5] arm: Add new config option ARCH_VERY_EARLY_INIT Pali Rohár
2022-05-16 6:37 ` Stefan Roese
2022-05-06 9:05 ` [PATCH 2/5] arm: mvebu: Move internal registers in arch_very_early_init() function Pali Rohár
2022-05-06 12:04 ` Stefan Roese
2022-05-06 12:09 ` Pali Rohár
2022-05-06 12:16 ` Stefan Roese
2022-05-06 12:35 ` Stefan Roese
2022-05-06 12:44 ` Pali Rohár
2022-06-01 10:27 ` Pali Rohár
2022-06-01 10:44 ` Stefan Roese
2022-06-01 10:54 ` Pali Rohár
2022-08-16 18:41 ` Fix KWBOOT_MSG_RSP_TIMEO_AXP in kwboot for Armada XP Pali Rohár
2022-08-19 7:30 ` Stefan Roese
2022-08-19 7:34 ` Pali Rohár
2022-05-16 6:37 ` [PATCH 2/5] arm: mvebu: Move internal registers in arch_very_early_init() function Stefan Roese
2022-05-06 9:05 ` Pali Rohár [this message]
2022-05-16 6:37 ` [PATCH 3/5] serial: Add new config option SPL_DEBUG_UART_BASE Stefan Roese
2022-05-06 9:05 ` [PATCH 4/5] serial: ns16550: Add support for SPL_DEBUG_UART_BASE Pali Rohár
2022-05-16 6:38 ` Stefan Roese
2022-05-06 9:05 ` [PATCH 5/5] arm: mvebu: turris_omnia: Fix DEBUG_UART_BASE Pali Rohár
2022-05-06 12:21 ` Stefan Roese
2022-05-06 12:30 ` Pali Rohár
2022-05-09 18:18 ` Pali Rohár
2022-05-16 6:38 ` Stefan Roese
2022-05-09 18:17 ` [PATCH 6/5] arm: mvebu: Fix DEBUG_UART_BASE for all 32-bit boards Pali Rohár
2022-05-16 6:39 ` Stefan Roese
2022-05-16 14:52 ` [PATCH 0/5] arm: mvebu: turris_omnia: Fix hangup in debug UART Stefan Roese
2022-05-16 16:50 ` Pali Rohár
2022-05-16 16:49 ` [PATCH 7/5] serial: Add new config option TPL_DEBUG_UART_BASE Pali Rohár
2022-05-17 7:51 ` Stefan Roese
2022-05-17 7:53 ` [PATCH 0/5] arm: mvebu: turris_omnia: Fix hangup in debug UART Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220506090517.5935-4-pali@kernel.org \
--to=pali@kernel.org \
--cc=marek.behun@nic.cz \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox