[PATCH 1/3] mmc: fsl_esdhc_spl: Add support for loading proper U-Boot from unaligned location

["Pali Rohár" <pali@kernel.org>]

This allows to concatenate SPL and proper U-Boot without extra alignment.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 drivers/mmc/fsl_esdhc_spl.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c
index 760f13d24018..e3175de16bab 100644
--- a/drivers/mmc/fsl_esdhc_spl.c
+++ b/drivers/mmc/fsl_esdhc_spl.c
@@ -155,10 +155,21 @@ again:
 	* Load U-Boot image from mmc into RAM
 	*/
 	code_len = CONFIG_SYS_MMC_U_BOOT_SIZE;
-	blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
-	blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len;
+	blk_start = offset / mmc->read_bl_len;
+	blk_off = offset % mmc->read_bl_len;
+	blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len + 1;
+	if (blk_off) {
+		err = mmc->block_dev.block_read(&mmc->block_dev,
+						blk_start, 1, tmp_buf);
+		if (err != 1) {
+			puts("spl: mmc read failed!!\n");
+			hang();
+		}
+		blk_start++;
+	}
 	err = mmc->block_dev.block_read(&mmc->block_dev, blk_start, blk_cnt,
-					(uchar *)CONFIG_SYS_MMC_U_BOOT_DST);
+					(uchar *)CONFIG_SYS_MMC_U_BOOT_DST +
+					(blk_off ? (mmc->read_bl_len - blk_off) : 0));
 	if (err != blk_cnt) {
 		puts("spl: mmc read failed!!\n");
 #ifndef CONFIG_FSL_CORENET
@@ -166,6 +177,14 @@ again:
 #endif
 		hang();
 	}
+	/*
+	 * SDHC DMA may erase bytes at dst + bl_len - blk_off - 8
+	 * due to unaligned access. So copy leading bytes from tmp_buf
+	 * after SDHC DMA transfer.
+	 */
+	if (blk_off)
+		memcpy((uchar *)CONFIG_SYS_MMC_U_BOOT_DST,
+		       tmp_buf + blk_off, mmc->read_bl_len - blk_off);
 
 	/*
 	* Clean d-cache and invalidate i-cache, to
-- 
2.20.1