From: Eddie James <eajames@linux.ibm.com>
To: u-boot@lists.denx.de
Cc: dylan_hung@aspeedtech.com, billy_tsai@aspeedtech.com,
chiawei_wang@aspeedtech.com, sjg@chromium.org, joel@jms.id.au,
Eddie James <eajames@linux.ibm.com>
Subject: [PATCH] arm: dts: ast2600: Add I2C pinctrl
Date: Wed, 1 Jun 2022 11:10:18 -0500 [thread overview]
Message-ID: <20220601161018.12056-1-eajames@linux.ibm.com> (raw)
Set the pinctrl groups for each I2C bus. These are essential to
I2C operating correctly.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/dts/ast2600.dtsi | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi
index 64074309b7..ef5b131ac0 100644
--- a/arch/arm/dts/ast2600.dtsi
+++ b/arch/arm/dts/ast2600.dtsi
@@ -833,6 +833,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
status = "disabled";
};
@@ -846,6 +848,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_default>;
status = "disabled";
};
@@ -859,6 +863,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_default>;
};
i2c3: i2c@200 {
@@ -871,6 +877,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_default>;
};
i2c4: i2c@280 {
@@ -883,6 +891,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
};
i2c5: i2c@300 {
@@ -895,6 +905,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c6_default>;
};
i2c6: i2c@380 {
@@ -907,6 +919,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c7_default>;
};
i2c7: i2c@400 {
@@ -919,6 +933,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c8_default>;
};
i2c8: i2c@480 {
@@ -931,6 +947,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c9_default>;
};
i2c9: i2c@500 {
@@ -943,6 +961,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c10_default>;
status = "disabled";
};
@@ -956,6 +976,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c11_default>;
status = "disabled";
};
@@ -969,6 +991,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c12_default>;
status = "disabled";
};
@@ -982,6 +1006,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c13_default>;
status = "disabled";
};
@@ -995,6 +1021,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c14_default>;
status = "disabled";
};
@@ -1008,6 +1036,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c15_default>;
status = "disabled";
};
@@ -1021,6 +1051,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c16_default>;
status = "disabled";
};
@@ -1246,6 +1278,7 @@
function = "I2C1";
groups = "I2C1";
};
+
pinctrl_i2c2_default: i2c2_default {
function = "I2C2";
groups = "I2C2";
--
2.31.1
next reply other threads:[~2022-06-01 16:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-01 16:10 Eddie James [this message]
2022-06-02 3:39 ` [PATCH] arm: dts: ast2600: Add I2C pinctrl Joel Stanley
2022-06-07 1:03 ` Ryan Chen
2023-06-01 16:31 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220601161018.12056-1-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=billy_tsai@aspeedtech.com \
--cc=chiawei_wang@aspeedtech.com \
--cc=dylan_hung@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox