* [PATCH] arm: dts: ast2600: Add I2C pinctrl
@ 2022-06-01 16:10 Eddie James
2022-06-02 3:39 ` Joel Stanley
2023-06-01 16:31 ` Tom Rini
0 siblings, 2 replies; 4+ messages in thread
From: Eddie James @ 2022-06-01 16:10 UTC (permalink / raw)
To: u-boot; +Cc: dylan_hung, billy_tsai, chiawei_wang, sjg, joel, Eddie James
Set the pinctrl groups for each I2C bus. These are essential to
I2C operating correctly.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/dts/ast2600.dtsi | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi
index 64074309b7..ef5b131ac0 100644
--- a/arch/arm/dts/ast2600.dtsi
+++ b/arch/arm/dts/ast2600.dtsi
@@ -833,6 +833,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
status = "disabled";
};
@@ -846,6 +848,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_default>;
status = "disabled";
};
@@ -859,6 +863,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_default>;
};
i2c3: i2c@200 {
@@ -871,6 +877,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_default>;
};
i2c4: i2c@280 {
@@ -883,6 +891,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
};
i2c5: i2c@300 {
@@ -895,6 +905,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c6_default>;
};
i2c6: i2c@380 {
@@ -907,6 +919,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c7_default>;
};
i2c7: i2c@400 {
@@ -919,6 +933,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c8_default>;
};
i2c8: i2c@480 {
@@ -931,6 +947,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c9_default>;
};
i2c9: i2c@500 {
@@ -943,6 +961,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c10_default>;
status = "disabled";
};
@@ -956,6 +976,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c11_default>;
status = "disabled";
};
@@ -969,6 +991,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c12_default>;
status = "disabled";
};
@@ -982,6 +1006,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c13_default>;
status = "disabled";
};
@@ -995,6 +1021,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c14_default>;
status = "disabled";
};
@@ -1008,6 +1036,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c15_default>;
status = "disabled";
};
@@ -1021,6 +1051,8 @@
bus-frequency = <100000>;
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scu ASPEED_CLK_APB2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c16_default>;
status = "disabled";
};
@@ -1246,6 +1278,7 @@
function = "I2C1";
groups = "I2C1";
};
+
pinctrl_i2c2_default: i2c2_default {
function = "I2C2";
groups = "I2C2";
--
2.31.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] arm: dts: ast2600: Add I2C pinctrl
2022-06-01 16:10 [PATCH] arm: dts: ast2600: Add I2C pinctrl Eddie James
@ 2022-06-02 3:39 ` Joel Stanley
2022-06-07 1:03 ` Ryan Chen
2023-06-01 16:31 ` Tom Rini
1 sibling, 1 reply; 4+ messages in thread
From: Joel Stanley @ 2022-06-02 3:39 UTC (permalink / raw)
To: Eddie James
Cc: U-Boot Mailing List, Dylan Hung, Billy Tsai, Chia-Wei, Wang,
Simon Glass
On Wed, 1 Jun 2022 at 16:10, Eddie James <eajames@linux.ibm.com> wrote:
>
> Set the pinctrl groups for each I2C bus. These are essential to
> I2C operating correctly.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Thanks Eddie.
> ---
> arch/arm/dts/ast2600.dtsi | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi
> index 64074309b7..ef5b131ac0 100644
> --- a/arch/arm/dts/ast2600.dtsi
> +++ b/arch/arm/dts/ast2600.dtsi
> @@ -833,6 +833,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1_default>;
> status = "disabled";
> };
>
> @@ -846,6 +848,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2_default>;
> status = "disabled";
> };
>
> @@ -859,6 +863,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3_default>;
> };
>
> i2c3: i2c@200 {
> @@ -871,6 +877,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c4_default>;
> };
>
> i2c4: i2c@280 {
> @@ -883,6 +891,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c5_default>;
> };
>
> i2c5: i2c@300 {
> @@ -895,6 +905,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c6_default>;
> };
>
> i2c6: i2c@380 {
> @@ -907,6 +919,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c7_default>;
> };
>
> i2c7: i2c@400 {
> @@ -919,6 +933,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c8_default>;
> };
>
> i2c8: i2c@480 {
> @@ -931,6 +947,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c9_default>;
> };
>
> i2c9: i2c@500 {
> @@ -943,6 +961,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c10_default>;
> status = "disabled";
> };
>
> @@ -956,6 +976,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c11_default>;
> status = "disabled";
> };
>
> @@ -969,6 +991,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c12_default>;
> status = "disabled";
> };
>
> @@ -982,6 +1006,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c13_default>;
> status = "disabled";
> };
>
> @@ -995,6 +1021,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c14_default>;
> status = "disabled";
> };
>
> @@ -1008,6 +1036,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c15_default>;
> status = "disabled";
> };
>
> @@ -1021,6 +1051,8 @@
> bus-frequency = <100000>;
> interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&scu ASPEED_CLK_APB2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c16_default>;
> status = "disabled";
> };
>
> @@ -1246,6 +1278,7 @@
> function = "I2C1";
> groups = "I2C1";
> };
> +
> pinctrl_i2c2_default: i2c2_default {
> function = "I2C2";
> groups = "I2C2";
> --
> 2.31.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH] arm: dts: ast2600: Add I2C pinctrl
2022-06-02 3:39 ` Joel Stanley
@ 2022-06-07 1:03 ` Ryan Chen
0 siblings, 0 replies; 4+ messages in thread
From: Ryan Chen @ 2022-06-07 1:03 UTC (permalink / raw)
To: Joel Stanley, Eddie James
Cc: U-Boot Mailing List, Dylan Hung, Billy Tsai, ChiaWei Wang,
Simon Glass
> -----Original Message-----
> From: Joel Stanley <joel@jms.id.au>
> Sent: Thursday, June 2, 2022 11:40 AM
> To: Eddie James <eajames@linux.ibm.com>
> Cc: U-Boot Mailing List <u-boot@lists.denx.de>; Dylan Hung
> <dylan_hung@aspeedtech.com>; Billy Tsai <billy_tsai@aspeedtech.com>;
> ChiaWei Wang <chiawei_wang@aspeedtech.com>; Simon Glass
> <sjg@chromium.org>
> Subject: Re: [PATCH] arm: dts: ast2600: Add I2C pinctrl
>
> On Wed, 1 Jun 2022 at 16:10, Eddie James <eajames@linux.ibm.com> wrote:
> >
> > Set the pinctrl groups for each I2C bus. These are essential to I2C
> > operating correctly.
> >
> > Signed-off-by: Eddie James <eajames@linux.ibm.com>
>
> Reviewed-by: Joel Stanley <joel@jms.id.au>
>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
> > ---
> > arch/arm/dts/ast2600.dtsi | 33 +++++++++++++++++++++++++++++++++
> > 1 file changed, 33 insertions(+)
> >
> > diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi
> > index 64074309b7..ef5b131ac0 100644
> > --- a/arch/arm/dts/ast2600.dtsi
> > +++ b/arch/arm/dts/ast2600.dtsi
> > @@ -833,6 +833,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c1_default>;
> > status = "disabled";
> > };
> >
> > @@ -846,6 +848,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c2_default>;
> > status = "disabled";
> > };
> >
> > @@ -859,6 +863,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c3_default>;
> > };
> >
> > i2c3: i2c@200 {
> > @@ -871,6 +877,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c4_default>;
> > };
> >
> > i2c4: i2c@280 {
> > @@ -883,6 +891,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c5_default>;
> > };
> >
> > i2c5: i2c@300 {
> > @@ -895,6 +905,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c6_default>;
> > };
> >
> > i2c6: i2c@380 {
> > @@ -907,6 +919,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c7_default>;
> > };
> >
> > i2c7: i2c@400 {
> > @@ -919,6 +933,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c8_default>;
> > };
> >
> > i2c8: i2c@480 {
> > @@ -931,6 +947,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c9_default>;
> > };
> >
> > i2c9: i2c@500 {
> > @@ -943,6 +961,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c10_default>;
> > status = "disabled";
> > };
> >
> > @@ -956,6 +976,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c11_default>;
> > status = "disabled";
> > };
> >
> > @@ -969,6 +991,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c12_default>;
> > status = "disabled";
> > };
> >
> > @@ -982,6 +1006,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c13_default>;
> > status = "disabled";
> > };
> >
> > @@ -995,6 +1021,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c14_default>;
> > status = "disabled";
> > };
> >
> > @@ -1008,6 +1036,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c15_default>;
> > status = "disabled";
> > };
> >
> > @@ -1021,6 +1051,8 @@
> > bus-frequency = <100000>;
> > interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> > clocks = <&scu ASPEED_CLK_APB2>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_i2c16_default>;
> > status = "disabled";
> > };
> >
> > @@ -1246,6 +1278,7 @@
> > function = "I2C1";
> > groups = "I2C1";
> > };
> > +
> > pinctrl_i2c2_default: i2c2_default {
> > function = "I2C2";
> > groups = "I2C2";
> > --
> > 2.31.1
> >
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] arm: dts: ast2600: Add I2C pinctrl
2022-06-01 16:10 [PATCH] arm: dts: ast2600: Add I2C pinctrl Eddie James
2022-06-02 3:39 ` Joel Stanley
@ 2023-06-01 16:31 ` Tom Rini
1 sibling, 0 replies; 4+ messages in thread
From: Tom Rini @ 2023-06-01 16:31 UTC (permalink / raw)
To: Eddie James; +Cc: u-boot, dylan_hung, billy_tsai, chiawei_wang, sjg, joel
[-- Attachment #1: Type: text/plain, Size: 643 bytes --]
On Wed, Jun 01, 2022 at 11:10:18AM -0500, Eddie James wrote:
> Set the pinctrl groups for each I2C bus. These are essential to
> I2C operating correctly.
>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> Reviewed-by: Joel Stanley <joel@jms.id.au>
> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
> ---
> arch/arm/dts/ast2600.dtsi | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
Sorry for the delay in getting to this patch. I think there's a more
general issue right now of needing to get the aspeed trees synced up to
the linux kernel, and then synced back down to U-Boot.
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-06-01 16:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-06-01 16:10 [PATCH] arm: dts: ast2600: Add I2C pinctrl Eddie James
2022-06-02 3:39 ` Joel Stanley
2022-06-07 1:03 ` Ryan Chen
2023-06-01 16:31 ` Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox