From: Philippe Schenker <dev@pschenker.ch>
To: u-boot@lists.denx.de
Cc: francesco.dolcini@toradex.com, marcel.ziswiler@toradex.com,
Philippe Schenker <philippe.schenker@toradex.com>,
Denys Drozdov <denys.drozdov@toradex.com>,
Oleksandr Suvorov <oleksandr.suvorov@toradex.com>,
Simon Glass <sjg@chromium.org>,
Stefan Agner <stefan.agner@toradex.com>
Subject: [PATCH 3/3] toradex: tdx-cfg-block: extend assembly version
Date: Mon, 13 Jun 2022 19:35:23 +0200 [thread overview]
Message-ID: <20220613173523.250697-3-dev@pschenker.ch> (raw)
In-Reply-To: <20220613173523.250697-1-dev@pschenker.ch>
From: Philippe Schenker <philippe.schenker@toradex.com>
There are two decimal digits reserved to encode the module version and
revision. This code so far implemented A-Z which used 0-25 of this
range.
This commit extends the range to make use of all 99 numbers. After
capital letters the form with a hashtag and number (e.g. #26) is used.
Examples:
If the assembly version is between zero and 25 the numbering is as follows,
as it also has been before this commit:
0: V0.0A
1: V0.0B
...
25: V0.0Z
New numbering of assembly version:
If the number is between 26 and 99 the new assembly version name is:
26: V0.0#26
27: V0.0#27
...
99: V0.0#99
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
board/toradex/common/tdx-cfg-block.c | 32 ++++++++++++++++++++++++----
board/toradex/common/tdx-common.c | 25 +++++++++++++++++-----
2 files changed, 48 insertions(+), 9 deletions(-)
diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c
index 9c87289ae9..05f25fe7e6 100644
--- a/board/toradex/common/tdx-cfg-block.c
+++ b/board/toradex/common/tdx-cfg-block.c
@@ -353,6 +353,18 @@ out:
return ret;
}
+static int parse_assembly_string(char *string_to_parse, u16 *assembly)
+{
+ if (string_to_parse[3] >= 'A' && string_to_parse[3] <= 'Z')
+ *assembly = string_to_parse[3] - 'A';
+ else if (string_to_parse[3] == '#')
+ *assembly = dectoul(&string_to_parse[4], NULL);
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
static int get_cfgblock_interactive(void)
{
char message[CONFIG_SYS_CBSIZE];
@@ -360,6 +372,7 @@ static int get_cfgblock_interactive(void)
char it = 'n';
char wb = 'n';
int len = 0;
+ int ret = 0;
/* Unknown module by default */
tdx_hw_tag.prodid = 0;
@@ -531,13 +544,18 @@ static int get_cfgblock_interactive(void)
}
while (len < 4) {
- sprintf(message, "Enter the module version (e.g. V1.1B): V");
+ sprintf(message, "Enter the module version (e.g. V1.1B or V1.1#26): V");
len = cli_readline(message);
}
tdx_hw_tag.ver_major = console_buffer[0] - '0';
tdx_hw_tag.ver_minor = console_buffer[2] - '0';
- tdx_hw_tag.ver_assembly = console_buffer[3] - 'A';
+
+ ret = parse_assembly_string(console_buffer, &tdx_hw_tag.ver_assembly);
+ if (ret) {
+ printf("Parsing module version failed\n");
+ return ret;
+ }
while (len < 8) {
sprintf(message, "Enter module serial number: ");
@@ -740,6 +758,7 @@ static int get_cfgblock_carrier_interactive(void)
{
char message[CONFIG_SYS_CBSIZE];
int len;
+ int ret = 0;
printf("Supported carrier boards:\n");
printf("CARRIER BOARD NAME\t\t [ID]\n");
@@ -753,13 +772,18 @@ static int get_cfgblock_carrier_interactive(void)
tdx_car_hw_tag.prodid = dectoul(console_buffer, NULL);
do {
- sprintf(message, "Enter carrier board version (e.g. V1.1B): V");
+ sprintf(message, "Enter carrier board version (e.g. V1.1B or V1.1#26): V");
len = cli_readline(message);
} while (len < 4);
tdx_car_hw_tag.ver_major = console_buffer[0] - '0';
tdx_car_hw_tag.ver_minor = console_buffer[2] - '0';
- tdx_car_hw_tag.ver_assembly = console_buffer[3] - 'A';
+
+ ret = parse_assembly_string(console_buffer, &tdx_car_hw_tag.ver_assembly);
+ if (ret) {
+ printf("Parsing module version failed\n");
+ return ret;
+ }
while (len < 8) {
sprintf(message, "Enter carrier board serial number: ");
diff --git a/board/toradex/common/tdx-common.c b/board/toradex/common/tdx-common.c
index 94e603c14f..5ad5d00a0d 100644
--- a/board/toradex/common/tdx-common.c
+++ b/board/toradex/common/tdx-common.c
@@ -24,7 +24,7 @@
#define SERIAL_STR_LEN 8
#define MODULE_VER_STR_LEN 4 // V1.1
-#define MODULE_REV_STR_LEN 1 // [A-Z]
+#define MODULE_REV_STR_LEN 3 // [A-Z] or #[26-99]
#ifdef CONFIG_TDX_CFG_BLOCK
static char tdx_serial_str[SERIAL_STR_LEN + 1];
@@ -83,6 +83,21 @@ void get_board_serial(struct tag_serialnr *serialnr)
}
#endif /* CONFIG_SERIAL_TAG */
+static const char *get_board_assembly(u16 ver_assembly)
+{
+ static char ver_name[MODULE_REV_STR_LEN + 1];
+
+ if (ver_assembly < 26) {
+ ver_name[0] = (char)ver_assembly + 'A';
+ ver_name[1] = '\0';
+ } else {
+ snprintf(ver_name, sizeof(ver_name),
+ "#%u", ver_assembly);
+ }
+
+ return ver_name;
+}
+
int show_board_info(void)
{
unsigned char ethaddr[6];
@@ -96,10 +111,10 @@ int show_board_info(void)
snprintf(tdx_serial_str, sizeof(tdx_serial_str),
"%08u", tdx_serial);
snprintf(tdx_board_rev_str, sizeof(tdx_board_rev_str),
- "V%1d.%1d%c",
+ "V%1d.%1d%s",
tdx_hw_tag.ver_major,
tdx_hw_tag.ver_minor,
- (char)tdx_hw_tag.ver_assembly + 'A');
+ get_board_assembly(tdx_hw_tag.ver_assembly));
env_set("serial#", tdx_serial_str);
@@ -118,10 +133,10 @@ int show_board_info(void)
snprintf(tdx_car_serial_str, sizeof(tdx_car_serial_str),
"%08u", tdx_car_serial);
snprintf(tdx_car_rev_str, sizeof(tdx_car_rev_str),
- "V%1d.%1d%c",
+ "V%1d.%1d%s",
tdx_car_hw_tag.ver_major,
tdx_car_hw_tag.ver_minor,
- (char)tdx_car_hw_tag.ver_assembly + 'A');
+ get_board_assembly(tdx_car_hw_tag.ver_assembly));
env_set("carrier_serial#", tdx_car_serial_str);
printf("Carrier: Toradex %s %s, Serial# %s\n",
--
2.36.1
next prev parent reply other threads:[~2022-06-13 17:35 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-13 17:35 [PATCH 1/3] toradex: tdx-cfg-block: use only snprintf Philippe Schenker
2022-06-13 17:35 ` [PATCH 2/3] toradex: tdx-cfg-block: use defines for string length Philippe Schenker
2022-06-15 11:59 ` Francesco Dolcini
2022-06-30 11:57 ` Marcel Ziswiler
2022-07-07 1:55 ` Tom Rini
2022-06-13 17:35 ` Philippe Schenker [this message]
2022-06-15 11:59 ` [PATCH 3/3] toradex: tdx-cfg-block: extend assembly version Francesco Dolcini
2022-06-30 12:31 ` Marcel Ziswiler
2022-07-07 1:55 ` Tom Rini
2022-06-15 11:59 ` [PATCH 1/3] toradex: tdx-cfg-block: use only snprintf Francesco Dolcini
2022-06-30 11:55 ` Marcel Ziswiler
2022-07-07 1:55 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220613173523.250697-3-dev@pschenker.ch \
--to=dev@pschenker.ch \
--cc=denys.drozdov@toradex.com \
--cc=francesco.dolcini@toradex.com \
--cc=marcel.ziswiler@toradex.com \
--cc=oleksandr.suvorov@toradex.com \
--cc=philippe.schenker@toradex.com \
--cc=sjg@chromium.org \
--cc=stefan.agner@toradex.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox