From: Heiko Thiery <heiko.thiery@gmail.com>
To: u-boot@lists.denx.de
Cc: Stefano Babic <sbabic@denx.de>, Marek Vasut <marex@denx.de>,
Fabio Estevam <festevam@gmail.com>,
"NXP i . MX U-Boot Team" <uboot-imx@nxp.com>,
Peng Fan <peng.fan@nxp.com>,
Heiko Thiery <heiko.thiery@gmail.com>
Subject: [PATCH] arm: dts: imx8mn: sync dts from Linux Kernel
Date: Mon, 20 Jun 2022 19:33:26 +0200 [thread overview]
Message-ID: <20220620173326.77165-1-heiko.thiery@gmail.com> (raw)
Sync dts for imx8mn-evk with Linux Kernel and change name for PMIC used in SPL.
commit 1cfa1e68af8d40ab233d5d27bc8446e4c5107571("arm64: dts: imx8mn-evk: fix the min/max voltages of the PMIC")
commit bc046b952a5494b0dc53be28779460cee1214a3f("arm64: dts: imx8mn-evk: use proper names for PMIC outputs")
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
---
arch/arm/dts/imx8mn-evk.dts | 56 ++++++++++++++++----------------
board/freescale/imx8mn_evk/spl.c | 4 +--
2 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/dts/imx8mn-evk.dts b/arch/arm/dts/imx8mn-evk.dts
index cd11fb28f5..4eb467df5b 100644
--- a/arch/arm/dts/imx8mn-evk.dts
+++ b/arch/arm/dts/imx8mn-evk.dts
@@ -31,7 +31,7 @@
};
&i2c1 {
- pmic: pca9450@25 {
+ pmic: pmic@25 {
compatible = "nxp,pca9450b";
reg = <0x25>;
pinctrl-names = "default";
@@ -41,18 +41,18 @@
regulators {
buck1: BUCK1{
- regulator-name = "BUCK1";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
+ regulator-name = "VDD_SOC";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <950000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
buck2: BUCK2 {
- regulator-name = "BUCK2";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
+ regulator-name = "VDD_ARM_0V9";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
@@ -61,63 +61,63 @@
};
buck4: BUCK4{
- regulator-name = "BUCK4";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
buck5: BUCK5{
- regulator-name = "BUCK5";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
buck6: BUCK6 {
- regulator-name = "BUCK6";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
+ regulator-name = "NVCC_DRAM_1V1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
ldo1: LDO1 {
- regulator-name = "LDO1";
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "NVCC_SNVS_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo2: LDO2 {
- regulator-name = "LDO2";
+ regulator-name = "VDD_SNVS_0V8";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1150000>;
+ regulator-max-microvolt = <800000>;
regulator-boot-on;
regulator-always-on;
};
ldo3: LDO3 {
- regulator-name = "LDO3";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "VDDA_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo4: LDO4 {
- regulator-name = "LDO4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "VDD_PHY_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
ldo5: LDO5 {
- regulator-name = "LDO5";
+ regulator-name = "NVCC_SD2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
diff --git a/board/freescale/imx8mn_evk/spl.c b/board/freescale/imx8mn_evk/spl.c
index 0d9909a662..a830407997 100644
--- a/board/freescale/imx8mn_evk/spl.c
+++ b/board/freescale/imx8mn_evk/spl.c
@@ -69,9 +69,9 @@ int power_init_board(void)
struct udevice *dev;
int ret;
- ret = pmic_get("pca9450@25", &dev);
+ ret = pmic_get("pmic@25", &dev);
if (ret == -ENODEV) {
- puts("No pca9450@25\n");
+ puts("No pmci@25\n");
return 0;
}
if (ret != 0)
--
2.30.2
next reply other threads:[~2022-06-20 17:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-20 17:33 Heiko Thiery [this message]
2022-06-21 7:02 ` [PATCH] arm: dts: imx8mn: sync dts from Linux Kernel Peng Fan (OSS)
2022-06-21 7:06 ` Heiko Thiery
2022-06-21 13:06 ` Fabio Estevam
2022-06-21 15:00 ` Tim Harvey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220620173326.77165-1-heiko.thiery@gmail.com \
--to=heiko.thiery@gmail.com \
--cc=festevam@gmail.com \
--cc=marex@denx.de \
--cc=peng.fan@nxp.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox