From: "Pali Rohár" <pali@kernel.org>
To: Wolfgang Denk <wd@denx.de>, Priyanka Jain <priyanka.jain@nxp.com>,
"Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: u-boot@lists.denx.de
Subject: [PATCH 1/2] powerpc: dts: p2020: Sort DT nodes by their addresses
Date: Thu, 23 Jun 2022 14:39:03 +0200 [thread overview]
Message-ID: <20220623123904.26116-1-pali@kernel.org> (raw)
No functional change.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
arch/powerpc/dts/p2020-post.dtsi | 89 ++++++++++++++++----------------
1 file changed, 45 insertions(+), 44 deletions(-)
diff --git a/arch/powerpc/dts/p2020-post.dtsi b/arch/powerpc/dts/p2020-post.dtsi
index 0d0cd2273cd4..3351874b5389 100644
--- a/arch/powerpc/dts/p2020-post.dtsi
+++ b/arch/powerpc/dts/p2020-post.dtsi
@@ -13,49 +13,6 @@
compatible = "fsl,p2020-immr", "simple-bus";
bus-frequency = <0x0>;
- usb@22000 {
- compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <28 0x2 0 0>;
- phy_type = "ulpi";
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic";
- device_type = "open-pic";
- big-endian;
- single-cpu-affinity;
- last-interrupt-source = <255>;
- };
-
- esdhc: sdhc@2e000 {
- compatible = "fsl,p2020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- espi0: spi@7000 {
- compatible = "fsl,mpc8536-espi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x7000 0x1000>;
- interrupts = < 0x3b 0x02 0x00 0x00 >;
- fsl,espi-num-chipselects = <4>;
- };
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-/include/ "pq3-duart-0.dtsi"
-/include/ "pq3-gpio-0.dtsi"
-
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
@@ -74,6 +31,22 @@
interrupts = <18 2 0 0>;
};
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+ espi0: spi@7000 {
+ compatible = "fsl,mpc8536-espi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7000 0x1000>;
+ interrupts = < 0x3b 0x02 0x00 0x00 >;
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+
L2: l2-cache-controller@20000 {
compatible = "fsl,p2020-l2-cache-controller";
reg = <0x20000 0x1000>;
@@ -83,7 +56,15 @@
};
/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-dma-1.dtsi"
+
+ usb@22000 {
+ compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <28 0x2 0 0>;
+ phy_type = "ulpi";
+ };
/include/ "pq3-etsec1-0.dtsi"
/include/ "pq3-etsec1-timer-0.dtsi"
@@ -95,10 +76,30 @@
/include/ "pq3-etsec1-1.dtsi"
/include/ "pq3-etsec1-2.dtsi"
+ esdhc: sdhc@2e000 {
+ compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2 0 0>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
/include/ "pq3-sec3.1-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic";
+ device_type = "open-pic";
+ big-endian;
+ single-cpu-affinity;
+ last-interrupt-source = <255>;
+ };
+
global-utilities@e0000 {
compatible = "fsl,p2020-guts";
reg = <0xe0000 0x1000>;
--
2.20.1
next reply other threads:[~2022-06-23 12:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-23 12:39 Pali Rohár [this message]
2022-06-23 12:39 ` [PATCH 2/2] powerpc: dts: p2020: Remove duplicate pic@40000 node Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220623123904.26116-1-pali@kernel.org \
--to=pali@kernel.org \
--cc=peng.fan@oss.nxp.com \
--cc=priyanka.jain@nxp.com \
--cc=u-boot@lists.denx.de \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox