From: Frieder Schrempf <frieder@fris.de>
To: u-boot@lists.denx.de
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>,
Fabio Estevam <festevam@gmail.com>,
Stefano Babic <sbabic@denx.de>
Subject: [PATCH 00/14] imx: kontron-sl-mx8mm: Improvements and OSM board support
Date: Wed, 13 Jul 2022 11:52:11 +0200 [thread overview]
Message-ID: <20220713095229.43274-1-frieder@fris.de> (raw)
From: Frieder Schrempf <frieder.schrempf@kontron.de>
This set contains several improvements for the kontron-sl-mx8mm board
configuration (patches 1 to 13) and support for a new SoM (patch 14,
including baseboard) that complies to the Open Standard Module (OSM) 1.0
hardware specification, size S (https://sget.org/standards/osm).
Frieder Schrempf (14):
imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees
imx: kontron-sl-mx8mm: Add redundant environment
imx: kontron-sl-mx8mm: Enable environment in MMC
imx: kontron-sl-mx8mm: Migrate to use CONFIG_EXTRA_ENV_TEXT
imx: kontron-sl-mx8mm: Enable bootaux command
imx: kontron-sl-mx8mm: lpddr4_timing.c: Add spaces for proper
alignment
imx: kontron-sl-mx8mm: Remove 100mt DDR setpoint
imx: kontron-sl-mx8mm: Use new LPDDR4 config parameters
imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types
imx: kontron-sl-mx8mm: Adjust board and SoM model strings
imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO
voltage
imx: kontron-sl-mx8mm: Use voltage rail names from schematic for PMIC
regulator-names
imx: kontron-sl-mx8mm: Simplify code in spl.c
imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL
i.MX8MM OSM-S
arch/arm/dts/Makefile | 1 -
.../imx8mm-kontron-n801x-s-lvds-u-boot.dtsi | 6 -
arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts | 116 -
.../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 7 +-
arch/arm/dts/imx8mm-kontron-n801x-s.dts | 5 +-
arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 30 +-
.../dts/imx8mm-kontron-n802x-s-u-boot.dtsi | 6 +
arch/arm/dts/imx8mm-kontron-n802x-s.dts | 376 ++++
arch/arm/dts/imx8mm-kontron-n802x-som.dtsi | 309 +++
...tsi => imx8mm-kontron-n80xx-s-u-boot.dtsi} | 8 +-
board/kontron/sl-mx8mm/MAINTAINERS | 1 +
board/kontron/sl-mx8mm/lpddr4_timing.c | 1969 ++++++++---------
board/kontron/sl-mx8mm/sl-mx8mm.c | 41 +
board/kontron/sl-mx8mm/sl-mx8mm.env | 7 +
board/kontron/sl-mx8mm/spl.c | 85 +-
configs/kontron-sl-mx8mm_defconfig | 10 +-
doc/board/kontron/sl-mx8mm.rst | 7 +-
include/configs/kontron-sl-mx8mm.h | 16 +-
18 files changed, 1717 insertions(+), 1283 deletions(-)
delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts
create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-s-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-s.dts
create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-som.dtsi
rename arch/arm/dts/{imx8mm-kontron-n801x-u-boot.dtsi => imx8mm-kontron-n80xx-s-u-boot.dtsi} (88%)
create mode 100644 board/kontron/sl-mx8mm/sl-mx8mm.env
--
2.37.0
next reply other threads:[~2022-07-13 9:52 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-13 9:52 Frieder Schrempf [this message]
2022-07-13 9:52 ` [PATCH 01/14] imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees Frieder Schrempf
2022-07-13 9:52 ` [PATCH 02/14] imx: kontron-sl-mx8mm: Add redundant environment Frieder Schrempf
2022-07-13 9:52 ` [PATCH 03/14] imx: kontron-sl-mx8mm: Enable environment in MMC Frieder Schrempf
2022-07-13 9:52 ` [PATCH 04/14] imx: kontron-sl-mx8mm: Migrate to use CONFIG_EXTRA_ENV_TEXT Frieder Schrempf
2022-07-13 9:52 ` [PATCH 05/14] imx: kontron-sl-mx8mm: Enable bootaux command Frieder Schrempf
2022-07-13 9:52 ` [PATCH 06/14] imx: kontron-sl-mx8mm: lpddr4_timing.c: Add spaces for proper alignment Frieder Schrempf
2022-07-13 9:52 ` [PATCH 07/14] imx: kontron-sl-mx8mm: Remove 100mt DDR setpoint Frieder Schrempf
2022-07-13 9:52 ` [PATCH 08/14] imx: kontron-sl-mx8mm: Use new LPDDR4 config parameters Frieder Schrempf
2022-07-13 9:52 ` [PATCH 09/14] imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types Frieder Schrempf
2022-07-13 9:52 ` [PATCH 10/14] imx: kontron-sl-mx8mm: Adjust board and SoM model strings Frieder Schrempf
2022-07-13 9:52 ` [PATCH 11/14] imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO voltage Frieder Schrempf
2022-07-14 15:23 ` Heiko Thiery
2022-07-13 9:52 ` [PATCH 12/14] imx: kontron-sl-mx8mm: Use voltage rail names from schematic for PMIC regulator-names Frieder Schrempf
2022-07-13 9:52 ` [PATCH 13/14] imx: kontron-sl-mx8mm: Simplify code in spl.c Frieder Schrempf
2022-07-13 9:52 ` [PATCH 14/14] imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S Frieder Schrempf
2022-07-25 13:03 ` [PATCH 00/14] imx: kontron-sl-mx8mm: Improvements and OSM board support Stefano Babic
2022-08-01 10:31 ` Frieder Schrempf
2022-08-01 11:23 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220713095229.43274-1-frieder@fris.de \
--to=frieder@fris.de \
--cc=festevam@gmail.com \
--cc=frieder.schrempf@kontron.de \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox