From: Frieder Schrempf <frieder@fris.de>
To: Fabio Estevam <festevam@gmail.com>,
Frieder Schrempf <frieder.schrempf@kontron.de>,
Stefano Babic <sbabic@denx.de>,
u-boot@lists.denx.de
Cc: Heiko Thiery <heiko.thiery@gmail.com>,
Fabio Estevam <festevam@denx.de>,
"NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Subject: [PATCH 12/14] imx: kontron-sl-mx8mm: Use voltage rail names from schematic for PMIC regulator-names
Date: Wed, 13 Jul 2022 11:52:23 +0200 [thread overview]
Message-ID: <20220713095229.43274-13-frieder@fris.de> (raw)
In-Reply-To: <20220713095229.43274-1-frieder@fris.de>
From: Frieder Schrempf <frieder.schrempf@kontron.de>
Improve the naming of the regulators to contain the voltage rail
names from the schematic.
Suggested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/dts/imx8mm-kontron-n801x-som.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-som.dtsi
index 2d0661cce89..c995592981c 100644
--- a/arch/arm/dts/imx8mm-kontron-n801x-som.dtsi
+++ b/arch/arm/dts/imx8mm-kontron-n801x-som.dtsi
@@ -85,7 +85,7 @@
regulators {
reg_vdd_soc: BUCK1 {
- regulator-name = "buck1";
+ regulator-name = "+0V8_VDD_SOC (BUCK1)";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <850000>;
regulator-boot-on;
@@ -96,7 +96,7 @@
};
reg_vdd_arm: BUCK2 {
- regulator-name = "buck2";
+ regulator-name = "+0V9_VDD_ARM (BUCK2)";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
regulator-boot-on;
@@ -107,7 +107,7 @@
};
reg_vdd_dram: BUCK3 {
- regulator-name = "buck3";
+ regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
regulator-boot-on;
@@ -115,7 +115,7 @@
};
reg_vdd_3v3: BUCK4 {
- regulator-name = "buck4";
+ regulator-name = "+3V3 (BUCK4)";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -123,7 +123,7 @@
};
reg_vdd_1v8: BUCK5 {
- regulator-name = "buck5";
+ regulator-name = "+1V8 (BUCK5)";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -131,7 +131,7 @@
};
reg_nvcc_dram: BUCK6 {
- regulator-name = "buck6";
+ regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-boot-on;
@@ -139,7 +139,7 @@
};
reg_nvcc_snvs: LDO1 {
- regulator-name = "ldo1";
+ regulator-name = "+1V8_NVCC_SNVS (LDO1)";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -147,7 +147,7 @@
};
reg_vdd_snvs: LDO2 {
- regulator-name = "ldo2";
+ regulator-name = "+0V8_VDD_SNVS (LDO2)";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
@@ -155,7 +155,7 @@
};
reg_vdda: LDO3 {
- regulator-name = "ldo3";
+ regulator-name = "+1V8_VDDA (LDO3)";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -163,7 +163,7 @@
};
reg_vdd_phy: LDO4 {
- regulator-name = "ldo4";
+ regulator-name = "+0V9_VDD_PHY (LDO4)";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
@@ -171,7 +171,7 @@
};
reg_nvcc_sd: LDO5 {
- regulator-name = "ldo5";
+ regulator-name = "NVCC_SD (LDO5)";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
--
2.37.0
next prev parent reply other threads:[~2022-07-13 9:55 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-13 9:52 [PATCH 00/14] imx: kontron-sl-mx8mm: Improvements and OSM board support Frieder Schrempf
2022-07-13 9:52 ` [PATCH 01/14] imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees Frieder Schrempf
2022-07-13 9:52 ` [PATCH 02/14] imx: kontron-sl-mx8mm: Add redundant environment Frieder Schrempf
2022-07-13 9:52 ` [PATCH 03/14] imx: kontron-sl-mx8mm: Enable environment in MMC Frieder Schrempf
2022-07-13 9:52 ` [PATCH 04/14] imx: kontron-sl-mx8mm: Migrate to use CONFIG_EXTRA_ENV_TEXT Frieder Schrempf
2022-07-13 9:52 ` [PATCH 05/14] imx: kontron-sl-mx8mm: Enable bootaux command Frieder Schrempf
2022-07-13 9:52 ` [PATCH 06/14] imx: kontron-sl-mx8mm: lpddr4_timing.c: Add spaces for proper alignment Frieder Schrempf
2022-07-13 9:52 ` [PATCH 07/14] imx: kontron-sl-mx8mm: Remove 100mt DDR setpoint Frieder Schrempf
2022-07-13 9:52 ` [PATCH 08/14] imx: kontron-sl-mx8mm: Use new LPDDR4 config parameters Frieder Schrempf
2022-07-13 9:52 ` [PATCH 09/14] imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types Frieder Schrempf
2022-07-13 9:52 ` [PATCH 10/14] imx: kontron-sl-mx8mm: Adjust board and SoM model strings Frieder Schrempf
2022-07-13 9:52 ` [PATCH 11/14] imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO voltage Frieder Schrempf
2022-07-14 15:23 ` Heiko Thiery
2022-07-13 9:52 ` Frieder Schrempf [this message]
2022-07-13 9:52 ` [PATCH 13/14] imx: kontron-sl-mx8mm: Simplify code in spl.c Frieder Schrempf
2022-07-13 9:52 ` [PATCH 14/14] imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S Frieder Schrempf
2022-07-25 13:03 ` [PATCH 00/14] imx: kontron-sl-mx8mm: Improvements and OSM board support Stefano Babic
2022-08-01 10:31 ` Frieder Schrempf
2022-08-01 11:23 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220713095229.43274-13-frieder@fris.de \
--to=frieder@fris.de \
--cc=festevam@denx.de \
--cc=festevam@gmail.com \
--cc=frieder.schrempf@kontron.de \
--cc=heiko.thiery@gmail.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox