public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Xavier Drudis Ferran <xdrudis@tinet.cat>
To: Quentin Schulz <foss+uboot@0leil.net>
Cc: sjg@chromium.org, philipp.tomsich@vrull.eu,
	kever.yang@rock-chips.com, alpernebiyasak@gmail.com,
	email2tema@gmail.com, jagan@amarulasolutions.com,
	u-boot@lists.denx.de,
	Quentin Schulz <quentin.schulz@theobroma-systems.com>
Subject: Re: [SPAM] [PATCH v2 1/2] rockchip: rk3399: fix incorrect ifdef check on SPL_DM_REGULATOR
Date: Mon, 18 Jul 2022 22:05:46 +0200	[thread overview]
Message-ID: <20220718200546.GF1686@begut> (raw)
In-Reply-To: <20220715150949.952853-1-foss+uboot@0leil.net>

El Fri, Jul 15, 2022 at 05:09:48PM +0200, Quentin Schulz deia:
> From: Quentin Schulz <quentin.schulz@theobroma-systems.com>
> 
> The check to perform is on CONFIG_SPL_DM_REGULATOR and not
> SPL_DM_REGULATOR. Also switch to in-code check instead of ifdefs.
>

Tested it on a Rock-Pi-4 with the patch below on top.
So with the small correction: 

Tested-by: Xavier Drudis Ferran <xdrudis@tinet.cat>
 
> Fixes: 07586ee4322a ("rockchip: rk3399: Support common spl_board_init")
> Cc: Quentin Schulz <foss+uboot@0leil.net>
> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
> ---
> 
> v2:
>  - use IS_ENABLED checks,
> 
>  arch/arm/mach-rockchip/rk3399/rk3399.c | 17 +++++++++--------
>  1 file changed, 9 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c
> index de11a3fa30..920da22307 100644
> --- a/arch/arm/mach-rockchip/rk3399/rk3399.c
> +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
> @@ -275,13 +275,14 @@ void spl_board_init(void)
>  		rk3399_force_power_on_reset();
>  #endif
>  
> -#if defined(SPL_DM_REGULATOR)
> -	/*
> -	 * Turning the eMMC and SPI back on (if disabled via the Qseven
> -	 * BIOS_ENABLE) signal is done through a always-on regulator).
> -	 */
> -	if (regulators_enable_boot_on(false))
> -		debug("%s: Cannot enable boot on regulator\n", __func__);
> -#endif
> +	if (IS_ENABLED(CONFIG_SPL_DM_REGULATOR)) {
> +		/*
> +		 * Turning the eMMC and SPI back on (if disabled via the Qseven
> +		 * BIOS_ENABLE) signal is done through a always-on regulator).
> +		 */
> +		if (regulators_enable_boot_on(false))
> +			debug("%s: Cannot enable boot on regulator\n",
> +			      __func__);
> +	}
>  }
>  #endif
> -- 
> 2.36.1
> 

The small correction:

---
 common/spl/spl.c          | 2 --
 include/power/regulator.h | 5 +++++
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/common/spl/spl.c b/common/spl/spl.c
index 70c11aa275..6ab997279d 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -39,9 +39,7 @@
 #include <fdt_support.h>
 #include <bootcount.h>
 #include <wdt.h>
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
 #include <power/regulator.h>
-#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 DECLARE_BINMAN_MAGIC_SYM;
diff --git a/include/power/regulator.h b/include/power/regulator.h
index ff1bfc2435..4bce61dd9f 100644
--- a/include/power/regulator.h
+++ b/include/power/regulator.h
@@ -631,6 +631,11 @@ static inline int regulators_enable_boot_on(bool verbose)
 	return -ENOSYS;
 }
 
+static inline int regulators_enable_boot_off(bool verbose)
+{
+	return -ENOSYS;
+}
+
 static inline int regulator_autoset(struct udevice *dev)
 {
 	return -ENOSYS;
-- 
2.20.1


      parent reply	other threads:[~2022-07-18 20:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-15 15:09 [PATCH v2 1/2] rockchip: rk3399: fix incorrect ifdef check on SPL_DM_REGULATOR Quentin Schulz
2022-07-15 15:09 ` [PATCH v2 2/2] rockchip: rk3399: fix incorrect ifdef check on SPL_GPIO Quentin Schulz
2022-07-18  9:53   ` [SPAM] " Xavier Drudis Ferran
2022-07-18 20:02   ` Xavier Drudis Ferran
2022-07-18 20:05 ` Xavier Drudis Ferran [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220718200546.GF1686@begut \
    --to=xdrudis@tinet.cat \
    --cc=alpernebiyasak@gmail.com \
    --cc=email2tema@gmail.com \
    --cc=foss+uboot@0leil.net \
    --cc=jagan@amarulasolutions.com \
    --cc=kever.yang@rock-chips.com \
    --cc=philipp.tomsich@vrull.eu \
    --cc=quentin.schulz@theobroma-systems.com \
    --cc=sjg@chromium.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox