From: Michael Trimarchi <michael@amarulasolutions.com>
To: u-boot@lists.denx.de
Cc: "Dario Binacchi" <dario@amarulasolutions.com>,
"Tommaso Merciai" <tommaso.merciai@amarulasolutions.com>,
"Patrice Chotard" <patrice.chotard@foss.st.com>,
"Wolfgang Denk" <wd@denx.de>, "Marek Behún" <marek.behun@nic.cz>,
"Simon Glass" <sjg@chromium.org>,
"Kory Maincent" <kory.maincent@bootlin.com>,
"Pali Rohár" <pali@kernel.org>
Subject: [PATCH V2 01/13] mtd: nand: Get rid of busw parameter
Date: Tue, 19 Jul 2022 22:21:51 +0200 [thread overview]
Message-ID: <20220719202213.1753259-2-michael@amarulasolutions.com> (raw)
In-Reply-To: <20220719202213.1753259-1-michael@amarulasolutions.com>
Upstream linux commit 29a198a159
Auto-detection functions are passed a busw parameter to retrieve the actual
NAND bus width and eventually set the correct value in chip->options.
Rework the nand_get_flash_type() function to get rid of this extra
parameter and let detection code directly set the NAND_BUSWIDTH_16 flag in
chip->options if needed.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
---
V1->V2:
- use short-commit form
- remove linux info. Uboot seems that backport without add this
extra information
---
drivers/mtd/nand/raw/nand_base.c | 59 +++++++++++++++++---------------
1 file changed, 32 insertions(+), 27 deletions(-)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index e8ece0a4a0..9a2194ebd3 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -3898,8 +3898,7 @@ static void nand_onfi_detect_micron(struct nand_chip *chip,
/*
* Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
*/
-static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
- int *busw)
+static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip)
{
struct nand_onfi_params *p = &chip->onfi_params;
char id[4];
@@ -3971,9 +3970,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
chip->bits_per_cell = p->bits_per_cell;
if (onfi_feature(chip) & ONFI_FEATURE_16_BIT_BUS)
- *busw = NAND_BUSWIDTH_16;
- else
- *busw = 0;
+ chip->options |= NAND_BUSWIDTH_16;
if (p->ecc_bits != 0xff) {
chip->ecc_strength_ds = p->ecc_bits;
@@ -4003,8 +4000,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
return 1;
}
#else
-static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
- int *busw)
+static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip)
{
return 0;
}
@@ -4013,8 +4009,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
/*
* Check if the NAND chip is JEDEC compliant, returns 1 if it is, 0 otherwise.
*/
-static int nand_flash_detect_jedec(struct mtd_info *mtd, struct nand_chip *chip,
- int *busw)
+static int nand_flash_detect_jedec(struct mtd_info *mtd, struct nand_chip *chip)
{
struct nand_jedec_params *p = &chip->jedec_params;
struct jedec_ecc_info *ecc;
@@ -4076,9 +4071,7 @@ static int nand_flash_detect_jedec(struct mtd_info *mtd, struct nand_chip *chip,
chip->bits_per_cell = p->bits_per_cell;
if (jedec_feature(chip) & JEDEC_FEATURE_16_BIT_BUS)
- *busw = NAND_BUSWIDTH_16;
- else
- *busw = 0;
+ chip->options |= NAND_BUSWIDTH_16;
/* ECC info */
ecc = &p->ecc_info[0];
@@ -4168,7 +4161,7 @@ static int nand_get_bits_per_cell(u8 cellinfo)
* manufacturer-specific "extended ID" decoding patterns.
*/
static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
- u8 id_data[8], int *busw)
+ u8 id_data[8])
{
int extid, id_len;
/* The 3rd id byte holds MLC / multichip data */
@@ -4221,7 +4214,6 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
/* Calc blocksize */
mtd->erasesize = (128 * 1024) <<
(((extid >> 1) & 0x04) | (extid & 0x03));
- *busw = 0;
} else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX &&
!nand_is_slc(chip)) {
unsigned int tmp;
@@ -4262,7 +4254,6 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
mtd->erasesize = 768 * 1024;
else
mtd->erasesize = (64 * 1024) << tmp;
- *busw = 0;
} else {
/* Calc pagesize */
mtd->writesize = 1024 << (extid & 0x03);
@@ -4275,7 +4266,9 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
mtd->erasesize = (64 * 1024) << (extid & 0x03);
extid >>= 2;
/* Get buswidth information */
- *busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+ /* Get buswidth information */
+ if (extid & 0x1)
+ chip->options |= NAND_BUSWIDTH_16;
/*
* Toshiba 24nm raw SLC (i.e., not BENAND) have 32B OOB per
@@ -4301,15 +4294,13 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
* the chip.
*/
static void nand_decode_id(struct mtd_info *mtd, struct nand_chip *chip,
- struct nand_flash_dev *type, u8 id_data[8],
- int *busw)
+ struct nand_flash_dev *type, u8 id_data[8])
{
int maf_id = id_data[0];
mtd->erasesize = type->erasesize;
mtd->writesize = type->pagesize;
mtd->oobsize = mtd->writesize / 32;
- *busw = type->options & NAND_BUSWIDTH_16;
/* All legacy ID NAND are small-page, SLC */
chip->bits_per_cell = 1;
@@ -4371,7 +4362,7 @@ static inline bool is_full_id_nand(struct nand_flash_dev *type)
}
static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
- struct nand_flash_dev *type, u8 *id_data, int *busw)
+ struct nand_flash_dev *type, u8 *id_data)
{
if (!strncmp((char *)type->id, (char *)id_data, type->id_len)) {
mtd->writesize = type->pagesize;
@@ -4386,8 +4377,6 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
chip->onfi_timing_mode_default =
type->onfi_timing_mode_default;
- *busw = type->options & NAND_BUSWIDTH_16;
-
if (!mtd->name)
mtd->name = type->name;
@@ -4449,9 +4438,24 @@ struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
if (!type)
type = nand_flash_ids;
+ /*
+ * Save the NAND_BUSWIDTH_16 flag before letting auto-detection logic
+ * override it.
+ * This is required to make sure initial NAND bus width set by the
+ * NAND controller driver is coherent with the real NAND bus width
+ * (extracted by auto-detection code).
+ */
+ busw = chip->options & NAND_BUSWIDTH_16;
+
+ /*
+ * The flag is only set (never cleared), reset it to its default value
+ * before starting auto-detection.
+ */
+ chip->options &= ~NAND_BUSWIDTH_16;
+
for (; type->name != NULL; type++) {
if (is_full_id_nand(type)) {
- if (find_full_id_nand(mtd, chip, type, id_data, &busw))
+ if (find_full_id_nand(mtd, chip, type, id_data))
goto ident_done;
} else if (*dev_id == type->dev_id) {
break;
@@ -4461,11 +4465,11 @@ struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->onfi_version = 0;
if (!type->name || !type->pagesize) {
/* Check if the chip is ONFI compliant */
- if (nand_flash_detect_onfi(mtd, chip, &busw))
+ if (nand_flash_detect_onfi(mtd, chip))
goto ident_done;
/* Check if the chip is JEDEC compliant */
- if (nand_flash_detect_jedec(mtd, chip, &busw))
+ if (nand_flash_detect_jedec(mtd, chip))
goto ident_done;
}
@@ -4479,10 +4483,11 @@ struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
if (!type->pagesize) {
/* Decode parameters from extended ID */
- nand_decode_ext_id(mtd, chip, id_data, &busw);
+ nand_decode_ext_id(mtd, chip, id_data);
} else {
- nand_decode_id(mtd, chip, type, id_data, &busw);
+ nand_decode_id(mtd, chip, type, id_data);
}
+
/* Get chip options */
chip->options |= type->options;
--
2.34.1
next prev parent reply other threads:[~2022-07-19 20:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-19 20:21 [PATCH V2 00/13] Port manufacturer specific initialization Michael Trimarchi
2022-07-19 20:21 ` Michael Trimarchi [this message]
2022-07-19 20:21 ` [PATCH V2 02/13] mtd: nand: Store nand ID in struct nand_chip Michael Trimarchi
2022-07-19 20:21 ` [PATCH V2 03/13] mtd: nand: Add manufacturer specific initialization/detection steps Michael Trimarchi
2022-07-19 20:21 ` [PATCH V2 04/13] mtd: nand: Get rid of mtd variable in function calls Michael Trimarchi
2022-07-19 20:21 ` [PATCH V2 05/13] mtd: nand: Export symbol nand_decode_ext_id Michael Trimarchi
2022-07-19 20:21 ` [PATCH V2 06/13] mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c Michael Trimarchi
2022-07-19 20:21 ` [PATCH V2 07/13] mtd: nand: Move Hynix specific init/detection logic in nand_hynix.c Michael Trimarchi
2022-07-19 20:21 ` [PATCH V2 08/13] mtd: nand: Move Toshiba specific init/detection logic in nand_toshiba.c Michael Trimarchi
2022-07-19 20:21 ` [PATCH V2 09/13] mtd: nand: Move Micron specific init logic in nand_micron.c Michael Trimarchi
2022-07-19 20:22 ` [PATCH V2 10/13] mtd: nand: Move AMD/Spansion specific init/detection logic in nand_amd.c Michael Trimarchi
2022-07-19 20:22 ` [PATCH V2 11/13] mtd: nand: Move Macronix specific initialization in nand_macronix.c Michael Trimarchi
2022-07-19 20:22 ` [PATCH V2 12/13] mtd: nand: toshiba: Retrieve ECC requirements from extended ID Michael Trimarchi
2022-07-19 20:22 ` [PATCH V2 13/13] mtd: decommission the NAND museum Michael Trimarchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220719202213.1753259-2-michael@amarulasolutions.com \
--to=michael@amarulasolutions.com \
--cc=dario@amarulasolutions.com \
--cc=kory.maincent@bootlin.com \
--cc=marek.behun@nic.cz \
--cc=pali@kernel.org \
--cc=patrice.chotard@foss.st.com \
--cc=sjg@chromium.org \
--cc=tommaso.merciai@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox