[PATCH 6/7] ARM: dts: imx: Adjust ECSPI1 pinmux on i.MX8M Plus DHCOM

[Marek Vasut <marex@denx.de>]

The ECSPI1 is on I2C1/I2C2 pins of the SoC, update the pinmux accordingly.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: uboot-imx <uboot-imx@nxp.com>
---
 arch/arm/dts/imx8mp-dhcom-som.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/dts/imx8mp-dhcom-som.dtsi b/arch/arm/dts/imx8mp-dhcom-som.dtsi
index 63cc6c92c41..0960c238871 100644
--- a/arch/arm/dts/imx8mp-dhcom-som.dtsi
+++ b/arch/arm/dts/imx8mp-dhcom-som.dtsi
@@ -70,7 +70,7 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
@@ -660,10 +660,10 @@
 
 	pinctrl_ecspi1: dhcom-ecspi1-grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x44
-			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x44
-			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x44
-			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40
+			MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK		0x44
+			MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI		0x44
+			MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO		0x44
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x40
 		>;
 	};
 
-- 
2.35.1