From: "Pali Rohár" <pali@kernel.org>
To: "Marek Behún" <kabel@kernel.org>, "Stefan Roese" <sr@denx.de>
Cc: u-boot@lists.denx.de
Subject: [PATCH] arm: mvebu: turris_mox: Add support for distroboot $fdt_addr
Date: Mon, 29 Aug 2022 15:44:48 +0200 [thread overview]
Message-ID: <20220829134448.11570-1-pali@kernel.org> (raw)
$fdt_addr is mandatory for systems which provides DTB in HW (e.g. ROM) and
wishes to pass that DTB to Linux.
Turris Mox contains DTB binary in SPI NOR memory at "dtb" partition which
starts at offset 0x7f0000 and is 0x10000 bytes long.
Armada 3700 CPU does not allow mapping SPI NOR memory into physical address
space like on other architectures and therefore set $fdt_addr variable to
memory range in RAM and loads this DTB binary from SPI NOR in misc_init_r()
function.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
board/CZ.NIC/turris_mox/turris_mox.c | 48 ++++++++++++++++++++++++++++
include/configs/turris_mox.h | 1 +
2 files changed, 49 insertions(+)
diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c
index 3dbd68e52366..3402515bbae2 100644
--- a/board/CZ.NIC/turris_mox/turris_mox.c
+++ b/board/CZ.NIC/turris_mox/turris_mox.c
@@ -23,6 +23,7 @@
#include <linux/string.h>
#include <miiphy.h>
#include <spi.h>
+#include <spi_flash.h>
#include "mox_sp.h"
@@ -339,6 +340,51 @@ static int get_reset_gpio(struct gpio_desc *reset_gpio)
return 0;
}
+/* Load default system DTB binary to $fdr_addr */
+static void load_spi_dtb(void)
+{
+ const char *const env_name[1] = { "fdt_addr" };
+ unsigned long size, offset;
+ struct udevice *spi_dev;
+ struct spi_flash *flash;
+ const char *addr_str;
+ unsigned long addr;
+ void *buf;
+
+ addr_str = env_get(env_name[0]);
+ if (!addr_str) {
+ env_set_default_vars(1, (char * const *)env_name, 0);
+ addr_str = env_get(env_name[0]);
+ }
+
+ if (!addr_str)
+ return;
+
+ addr = hextoul(addr_str, NULL);
+ if (!addr)
+ return;
+
+ spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS, &spi_dev);
+ flash = dev_get_uclass_priv(spi_dev);
+ if (!flash)
+ return;
+
+ /*
+ * SPI NOR "dtb" partition offset & size hardcoded for now because the
+ * mtd subsystem does not offer finding the partition yet and we do not
+ * want to reimplement OF partition parser here.
+ */
+ offset = 0x7f0000;
+ size = 0x10000;
+
+ buf = map_physmem(addr, size, MAP_WRBACK);
+ if (!buf)
+ return;
+
+ spi_flash_read(flash, offset, size, buf);
+ unmap_physmem(buf, size);
+}
+
int misc_init_r(void)
{
u8 mac[2][6];
@@ -358,6 +404,8 @@ int misc_init_r(void)
eth_env_set_enetaddr_by_index("eth", i, mac[i]);
}
+ load_spi_dtb();
+
return 0;
}
diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h
index b8ff705ac923..f549f9f7ad06 100644
--- a/include/configs/turris_mox.h
+++ b/include/configs/turris_mox.h
@@ -36,6 +36,7 @@
"bootm 0x5800000"
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_addr=0x4c00000\0" \
"scriptaddr=0x4d00000\0" \
"pxefile_addr_r=0x4e00000\0" \
"fdt_addr_r=0x4f00000\0" \
--
2.20.1
next reply other threads:[~2022-08-29 13:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-29 13:44 Pali Rohár [this message]
2022-08-30 12:27 ` [PATCH] arm: mvebu: turris_mox: Add support for distroboot $fdt_addr Stefan Roese
2022-09-13 7:00 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220829134448.11570-1-pali@kernel.org \
--to=pali@kernel.org \
--cc=kabel@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox