[PATCH 1/2] board: verdin-imx8mm: add call to ft_common_board_setup

[Philippe Schenker <dev@pschenker.ch>]

From: Philippe Schenker <philippe.schenker@toradex.com>

With this call the following attributes get set to the device-tree
and are then accessible from linux in /proc/device-tree/

serial-number: The serial number that is stored in config-block
toradex,board-rev: The version of the module (e.g. V1.1A)
toradex,product-id: The SKU number of the module running

Fixes: commit 14d5aeff776b ("board: toradex: Add Verdin iMX8M Mini support")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

 board/toradex/verdin-imx8mm/verdin-imx8mm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/toradex/verdin-imx8mm/verdin-imx8mm.c b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
index 7597cd81f945..ffcb04fc31e8 100644
--- a/board/toradex/verdin-imx8mm/verdin-imx8mm.c
+++ b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
@@ -128,6 +128,6 @@ int board_phys_sdram_size(phys_size_t *size)
 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 int ft_board_setup(void *blob, struct bd_info *bd)
 {
-	return 0;
+	return ft_common_board_setup(blob, bd);
 }
 #endif
-- 
2.37.2