[PATCH 5/9] ddr: fsl: Fix checking for maximal mappable memory

["Pali Rohár" <pali@kernel.org>]

Check needs to be done against CONFIG_MAX_MEM_MAPPED macro and not fixed
size 4GB (as CONFIG_MAX_MEM_MAPPED can be lower and for example for e500
cores it is just 2GB). Also fix printf re-align, which should be applied
only for non-SPL builds, during init_dram() call.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 drivers/ddr/fsl/main.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c
index f389e5ef9524..ec040f265da2 100644
--- a/drivers/ddr/fsl/main.c
+++ b/drivers/ddr/fsl/main.c
@@ -856,13 +856,22 @@ phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo)
 	debug("total_memory by %s = %llu\n", __func__, total_memory);
 
 #if !defined(CONFIG_PHYS_64BIT)
-	/* Check for 4G or more.  Bad. */
-	if ((first_ctrl == 0) && (total_memory >= (1ull << 32))) {
+	/* Check for more than max memory.  Bad. */
+	if ((first_ctrl == 0) && (total_memory > CONFIG_MAX_MEM_MAPPED)) {
 		puts("Detected ");
 		print_size(total_memory, " of memory\n");
-		printf("       This U-Boot only supports < 4G of DDR\n");
-		printf("       You could rebuild it with CONFIG_PHYS_64BIT\n");
-		printf("       "); /* re-align to match init_dram print */
+#ifndef CONFIG_SPL_BUILD
+		puts("       "); /* re-align to match init_dram print */
+#endif
+		puts("This U-Boot only supports <= ");
+		print_size(CONFIG_MAX_MEM_MAPPED, " of DDR\n");
+#ifndef CONFIG_SPL_BUILD
+		puts("       "); /* re-align to match init_dram print */
+#endif
+		puts("You could rebuild it with CONFIG_PHYS_64BIT\n");
+#ifndef CONFIG_SPL_BUILD
+		puts("       "); /* re-align to match init_dram print */
+#endif
 		total_memory = CONFIG_MAX_MEM_MAPPED;
 	}
 #endif
-- 
2.20.1