From: Jit Loon Lim <jit.loon.lim@intel.com>
To: u-boot@lists.denx.de
Cc: Jagan Teki <jagan@amarulasolutions.com>,
Vignesh R <vigneshr@ti.com>, Marek <marex@denx.de>,
Simon <simon.k.r.goldschmidt@gmail.com>,
Tien Fong <tien.fong.chee@intel.com>,
Kok Kiang <kok.kiang.hea@intel.com>,
Siew Chin <elly.siew.chin.lim@intel.com>,
Sin Hui <sin.hui.kho@intel.com>, Raaj <raaj.lokanathan@intel.com>,
Dinesh <dinesh.maniyam@intel.com>,
Boon Khai <boon.khai.ng@intel.com>,
Alif <alif.zakuan.yuslaimi@intel.com>,
Teik Heng <teik.heng.chong@intel.com>,
Hazim <muhammad.hazim.izzat.zamri@intel.com>,
Jit Loon Lim <jit.loon.lim@intel.com>,
Sieu Mun Tang <sieu.mun.tang@intel.com>,
Ley Foon Tan <ley.foon.tan@intel.com>
Subject: [PATCH 2/7] configs: HSD #1507526426-3: configs: socfpga: agilex: Move MTDIDS_DEFAULT to defconfig
Date: Sun, 11 Sep 2022 19:47:35 +0800 [thread overview]
Message-ID: <20220911114740.24447-2-jit.loon.lim@intel.com> (raw)
In-Reply-To: <20220911114740.24447-1-jit.loon.lim@intel.com>
From: Ley Foon Tan <ley.foon.tan@intel.com>
Move MTDIDS_DEFAULT to defconfig and add mtdids to ENV settings.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
---
configs/socfpga_agilex_atf_defconfig | 1 +
configs/socfpga_agilex_defconfig | 1 +
...efconfig => socfpga_agilex_qspi_defconfig} | 54 +++++++------------
include/configs/socfpga_soc64_common.h | 1 +
4 files changed, 22 insertions(+), 35 deletions(-)
copy configs/{socfpga_agilex_defconfig => socfpga_agilex_qspi_defconfig} (51%)
diff --git a/configs/socfpga_agilex_atf_defconfig b/configs/socfpga_agilex_atf_defconfig
index c7b203fece..088d95cd4e 100644
--- a/configs/socfpga_agilex_atf_defconfig
+++ b/configs/socfpga_agilex_atf_defconfig
@@ -63,6 +63,7 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="kernel.itb"
diff --git a/configs/socfpga_agilex_defconfig b/configs/socfpga_agilex_defconfig
index bd6360a0a4..7ecb9f0974 100644
--- a/configs/socfpga_agilex_defconfig
+++ b/configs/socfpga_agilex_defconfig
@@ -57,6 +57,7 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="Image"
diff --git a/configs/socfpga_agilex_defconfig b/configs/socfpga_agilex_qspi_defconfig
similarity index 51%
copy from configs/socfpga_agilex_defconfig
copy to configs/socfpga_agilex_qspi_defconfig
index bd6360a0a4..bcf697caeb 100644
--- a/configs/socfpga_agilex_defconfig
+++ b/configs/socfpga_agilex_qspi_defconfig
@@ -1,52 +1,36 @@
CONFIG_ARM=y
-CONFIG_COUNTER_FREQUENCY=400000000
+CONFIG_ARM_SMCCC=y
+CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds"
CONFIG_ARCH_SOCFPGA=y
CONFIG_SYS_TEXT_BASE=0x1000
-CONFIG_SYS_MALLOC_LEN=0x500000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_OFFSET=0x200
+CONFIG_ENV_OFFSET=0x02080000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="socfpga_agilex_socdk"
CONFIG_SPL_TEXT_BASE=0xFFE00000
CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y
CONFIG_IDENT_STRING="socfpga_agilex"
CONFIG_SPL_FS_FAT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
# CONFIG_PSCI_RESET is not set
-CONFIG_SYS_LOAD_ADDR=0x02000000
-CONFIG_SYS_MEMTEST_START=0x00000000
-CONFIG_SYS_MEMTEST_END=0x3fe00000
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x101000
-CONFIG_REMAKE_ELF=y
+CONFIG_ARMV8_PSCI=y
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_agilex_socdk_qspi"
+CONFIG_QSPI_BOOT=y
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="earlycon"
+CONFIG_BOOTARGS="earlycon panic=-1"
CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run fatscript; run mmcload; run linux_qspi_enable; run mmcboot"
-CONFIG_SPL_MAX_SIZE=0x40000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x3ff00000
-CONFIG_SPL_BSS_MAX_SIZE=0x100000
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0xffe3f000
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000
-CONFIG_SYS_SPL_MALLOC_SIZE=0x500000
+CONFIG_BOOTCOMMAND="sf probe;run qspiload;run linux_qspi_enable;rsu dtb;run qspiboot"
CONFIG_SPL_CACHE=y
CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x3c00000
-CONFIG_SPL_TARGET="spl/u-boot-spl-dtb.hex"
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="SOCFPGA_AGILEX # "
-CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_PBSIZE=2082
-CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
@@ -57,16 +41,17 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_USE_BOOTFILE=y
-CONFIG_BOOTFILE="Image"
+CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_BLK=y
CONFIG_SPL_ALTERA_SDRAM=y
CONFIG_DWAPB_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_DW=y
-CONFIG_MMC_DW=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
CONFIG_SF_DEFAULT_MODE=0x2003
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
@@ -80,9 +65,8 @@ CONFIG_SPI=y
CONFIG_CADENCE_QSPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_DWC2=y
CONFIG_USB_STORAGE=y
-CONFIG_DESIGNWARE_WATCHDOG=y
-CONFIG_WDT=y
# CONFIG_SPL_USE_TINY_PRINTF is not set
-CONFIG_PANIC_HANG=y
+CONFIG_PANIC_HANG=y
\ No newline at end of file
diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h
index 06198ddd82..e8175926a3 100644
--- a/include/configs/socfpga_soc64_common.h
+++ b/include/configs/socfpga_soc64_common.h
@@ -53,6 +53,7 @@
"bootm ${loadaddr}\0" \
"mmcfitload=mmc rescan;" \
"load mmc 0:1 ${loadaddr} ${bootfile}\0" \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"linux_qspi_enable=if sf probe; then " \
"echo Enabling QSPI at Linux DTB...;" \
"fdt addr ${fdt_addr}; fdt resize;" \
--
2.26.2
next prev parent reply other threads:[~2022-09-11 11:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-11 11:47 [PATCH 1/7] configs: HSD #1507526426-2: configs: socfpga: agilex: Enable CONFIG_CMD_MTD Jit Loon Lim
2022-09-11 11:47 ` Jit Loon Lim [this message]
2022-09-11 11:47 ` [PATCH 3/7] arch: arm: dts: HSD #1507526426-6: arm: dts: socfpga: Add NAND support for Agilex Jit Loon Lim
2022-09-11 11:47 ` [PATCH 4/7] configs: HSD #1507526426-7: configs: socfpga: agilex: Add NAND support Jit Loon Lim
2022-09-11 11:47 ` [PATCH 5/7] configs: HSD #1507526426-8: configs: socfpga: Add Nand defconfig for Agilex Jit Loon Lim
2022-09-11 11:47 ` [PATCH 6/7] arch: arm: dts: HSD #1507526426-9: arm: dts: agilex: Fix incorrect rootfs partition size for NAND Jit Loon Lim
2022-09-11 11:47 ` [PATCH 7/7] configs: HSD #1507526426-10: configs: socfpga: agilex: Add NAND boot support Jit Loon Lim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220911114740.24447-2-jit.loon.lim@intel.com \
--to=jit.loon.lim@intel.com \
--cc=alif.zakuan.yuslaimi@intel.com \
--cc=boon.khai.ng@intel.com \
--cc=dinesh.maniyam@intel.com \
--cc=elly.siew.chin.lim@intel.com \
--cc=jagan@amarulasolutions.com \
--cc=kok.kiang.hea@intel.com \
--cc=ley.foon.tan@intel.com \
--cc=marex@denx.de \
--cc=muhammad.hazim.izzat.zamri@intel.com \
--cc=raaj.lokanathan@intel.com \
--cc=sieu.mun.tang@intel.com \
--cc=simon.k.r.goldschmidt@gmail.com \
--cc=sin.hui.kho@intel.com \
--cc=teik.heng.chong@intel.com \
--cc=tien.fong.chee@intel.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox